-----------------------------------------------------------------------------

               H E W L E T T  P A C K A R D  C O M P A N Y

            hp ProLiant Support Pack (PSP) for Microsoft Windows NT 4.0

-----------------------------------------------------------------------------  
                 

1.  INTRODUCTION

This file contains information regarding use of the 
HP ProLiant Support Pack for Microsoft Windows NT 4.0.
The following information is provided:

    Support Pack Installation
    Component Usage
    Log File Usage

2.  SUPPORT PACK INSTALLATION
 
The primary method for installing the Support Pack is to run the SETUP.EXE
program included with the Support Pack.  By default, all software is selected 
for installation.  In most circumstances, this default selection should not be
altered, and installation is as simple as pressing the "Install" button.  Even
when selected, only software that is appropriate for the system it is being run
on will actually be installed.  Press the "Install" button to proceed with the
installation.  After installation of the appropriate software the utility will
display any installation failures.  For more information on the usage of
SETUP.EXE, refer to the white paper or access the help system while running
SETUP.EXE.
 
A BP000156.CMD file is also provided with the Support Pack for use
in installing the Support Pack from a command prompt without user interaction.
As with the SETUP.EXE program, all software appropriate for the system it is
being run on will be installed.
 
The HP ProLiant Support Pack for Microsoft Windows NT 4.0 contains numerous files.  All
files must be present in the same directory as the SETUP.EXE program in 
order for the Support Pack to be installed properly.
 
A console version of the setup application (SETUPC.EXE) is also provided as a
way to script installations of the Support Pack or components.  For more
information on its usage, refer to the help available by running setupc.exe /?.

3.	COMPONENT USAGE

In addition to the SETUP.EXE program mentioned above, the Support Pack contains
individual .EXE files corresponding to the various components that make up the
Support Pack. If necessary, these components can be installed individually or
their contents extracted to a floppy diskette for use during OS installation.

To install an individual component just run the appropriate CPxxxxx.EXE file 
and chose the "Install" button.

To extract the contents of a component to diskette run the appropriate 
CPxxxxx.EXE file, then chose the "Extract" button instead of the "Install" 
button.

3.1 COMPONENT CONFIGURATION
 
Component files now offer optional support configuration before they are
installed. The optional support configuration allows component-specific 
settings to be written into the .EXE file for availability during installation.
 
Configuration is performed using the functionality provided by SETUP.EXE.
When SETUP.EXE is launched, you will be able to all of the components that
support or require configuration in the tree view of the main window.  To
configure a component, right-click on an item and select "Configure..."
from the context-menu.  For more information, consult the 
HP ProLiant Support Pack (PSP) and Deployment Utilities User Guide. 
 
NOTE:  Component Configuration requires that the Smart Components must be
in a write-accessible location. A CD or read-only network share is not supported.
If you have obtained this Support Pack on the Smart Start CD, copy the entire
contents of the Support Pack directory to the local hard drive or a network share
and make sure the read-only attributes have been cleared from all of the files.


cp002885.exe	hp ProLiant System Management Driver for Windows NT 4.0
cp002886.exe	hp ProLiant 32-Bit SCSI Controller Driver for Windows NT 4.0
cp002545.exe	hp ProLiant 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Windows NT 4.0
cp002546.exe	hp ProLiant Drive Array Driver for Windows NT 4.0
cp002547.exe	hp ProLiant Smart Array-2 Controllers Driver for Windows NT 4.0
cp002890.exe	hp ProLiant Smart Array 5x Controller Driver for Windows NT 4.0
cp002549.exe	hp StorageWorks Fibre Channel Host Bus Adapter for Windows NT 4.0
cp002550.exe	hp ProLiant CMD 0649 IDE Ultra DMA Controller Driver  For Windows NT 4.0
cp002893.exe	hp ProLiant Integrated Ultra ATA-100 Dual Channel Driver for Windows NT 4.0
cp002552.exe	hp ProLiant Storage System Support for Windows NT 4.0
cp002909.exe	hp ProLiant Integrated ATA RAID Management Utility for Windows
cp002553.exe	hp ProLiant Array Redundancy Software for Windows NT 4.0
cp002896.exe	hp ProLiant Remote Monitor Service for Windows NT 4.0
cp002897.exe	hp ProLiant Remote Insight Board Driver for Windows NT 4.0
cp002556.exe	hp ProLiant Remote Insight Board Wide Area Network Driver for Windows NT 4.0
cp002557.exe	hp ProLiant Integrated Lights-Out Management Interface Driver for Windows NT 4.0
cp002900.exe	hp ProLiant Remote Insight Lights-Out II Board Driver for Windows NT
cp002559.exe	hp ProLiant ATI RAGE IIC Video Controller Driver for Windows NT 4.0
cp002560.exe	hp ProLiant ATI RAGE XL Video Controller Driver for Windows NT 4.0
cp002561.exe	hp ProLiant Integrated Management Display Utility for Windows NT 4.0
cp002562.exe	hp ProLiant Integrated Management Log Viewer for Windows NT 4.0
cp002563.exe	hp ProLiant Power Supply Viewer for Windows NT 4.0
cp002564.exe	hp ProLiant PCI Hot Plug Utility for Windows NT 4.0
cp002565.exe	hp ProLiant Power Down Manager for Windows NT 4.0
cp002566.exe	hp ProLiant Enhanced Integrated Management Display Service for Windows NT 4.0
cp002597.exe	hp ProLiant Array Configuration Utility for Windows
cp002523.exe	hp ProLiant NetFlex/Netelligent Adapter Driver for Windows NT 4.0
cp002815.exe	hp ProLiant Ethernet/Fast Ethernet or Gigabit NIC Driver for Windows NT 4.0
cp003356.exe	Version Control Agent for Windows
cp003355.exe	Foundation Agents for Windows
cp002600.exe	Server Agents for Windows
cp002601.exe	Storage Agents for Windows
cp002978.exe	NIC Agents for Windows
cp003357.exe	Survey Utility for Windows

4.  LOG FILE USAGE

Progress and results of the installation of all software included in the Support
Pack is logged to the file %SystemDrive%\cpqsystem\log\cpqsetup.log.  This file can be
viewed with any text editor.  Information for subsequent installations is
appended to this log file, providing a chronological history of installation
activity for all software installed by the Support Pack installation utilities.

----------------------------------------------------------------
Copyright 2000-2003 Compaq Information Technologies Group, L.P.

Compaq and the Compaq logo Reg. U.S. Pat. & Tm. Off. All other product
names mentioned herein may be trademarks and/or registered trademarks
of their respective companies.

Compaq shall not be liable for technical or editorial errors or
omissions contained herein. The information in this document is provided
"as is" without warranty of any kind and is subject to change without
notice. The warranties for Compaq products are set forth in the express
limited warranty statements accompanying such products. Nothing herein
should be construed as constituting an additional warranty.
