
         C O M P A Q (R)  C O M P U T E R  C O R P O R A T I O N

                         Compaq Support Paq for
                         Microsoft Windows 2000
                 

1.  INTRODUCTION

This file contains information regarding use of the Compaq Support Paq for
Microsoft Windows 2000.  The following information is provided:

    Support Paq Installation
    Component Usage
    Log File Usage


2.  SUPPORT PAQ INSTALLATION

The primary method for installing the Support Paq is to run the SETUP.EXE
program included with the Support Paq.  By default, all software is selected for
installation.  In most circumstances, this default selection should not be
altered, and installation is as simple as pressing the "Install" button.  Even
when selected, only software that is appropriate for the system it is being run
on will actually be installed.  Press the "Install" button to proceed with the
installation.  After installation of the appropriate software the utility will
display its results, including indication of software successfully installed,
software not needed for the current system configuration and any installation
failures.  For more information on the usage of SETUP.EXE, refer to the help
file (SETUP.HLP).

A BPxxxxxx.CMD file is also provided with the Support Paq for use in installing
the Support Paq from a command prompt without user interaction.  As with the
SETUP.EXE program, all software appropriate for the system it is being run on
will be installed.

The Compaq Support Paq for Microsoft Windows 2000 contains numerous files.  All
files must be present in the same directory as the SETUP.EXE program or in order
for the Support Paq to be installed properly.

A console version of the setup application (SETUPC.EXE) is also provided as a
way to script installations of the Support Paq or components.  For more
information on its usage, refer to the help file (SETUPC.HLP).


3.  COMPONENT USAGE

In addition to the SETUP.EXE program mentioned above, the Support Paq contains
individual .EXE files corresponding to the various components that make
up the Support Paq.  If necessary, these components can be installed
individually or their contents extracted to a floppy diskette for use during OS
installation.

To install an individual component just run the appropriate CPxxxxx.EXE file
and chose the "Install" button.

To extract the contents of a component to diskette run the appropriate
CPxxxxx.EXE file, then chose the "Extract" button instead of the "Install"
button.

The following table specifies the Compaq software contained within and installed
by each component:

CP000286.EXE     Compaq Advanced System Management Controller Driver
CP000390.EXE     Compaq System Management Controller Driver
CP000389.EXE     Compaq Integrated System Management Controller Driver
CP000277.EXE     Compaq Drive Array Driver
CP000278.EXE     Compaq Smart Array-2 Controllers Driver
CP000391.EXE     Compaq 32-Bit SCSI Controller
CP000299.EXE     Compaq Smart Array 53xx Adapter Support
CP000295.EXE     Compaq 64-Bit/66Mhx Wide Ultra3 Controller Driver
CP000280.EXE     Compaq StorageWorks Fibre Channel Host Bus Adapter Driver
CP000283.EXE     Compaq NetFlex/Netelligent Adapter Driver
CP000284.EXE     Compaq Ethernet or Fast Ethernet NIC Driver
CP000285.EXE     Compaq Gigabit Ethernet NIC Driver
CP000297.EXE     Compaq Network Teaming and Configuration
CP000281.EXE     Compaq Proliant Storage System Support
CP000282.EXE     Compaq Drive Array Notification
CP000293.EXE     Compaq Remote Monitor Service
CP000287.EXE     Compaq PCI Hot Plug Controller Driver
CP000288.EXE     Compaq Integrated Management Display Utility
CP000289.EXE     Compaq Integrated Management Log Viewer
CP000290.EXE     Compaq Power Supply Viewer
CP000291.EXE     Compaq Power Down Manager
CP000292.EXE     Compaq Enhanced Integrated Management Display Service
CP000294.EXE     Compaq Array Configuration Utility
CP000296.EXE     Compaq ATI RAGE IIC Video Controller Driver
CP000298.EXE     Compaq Remote Insight Board Driver
CP000359.EXE     Compaq Array Redundancy Software
CP000231.EXE     Compaq Foundation Agent
CP000583.EXE     Compaq Server Agent
CP000234.EXE     Compaq Storage Agent
CP000233.EXE     Compaq NIC Agent
CP000451.EXE     Compaq CMD 0649 Ultra DMA IDE Controller Driver for Windows 2000
CP000235.EXE     Compaq Survey Utility

4.  LOG FILE USAGE

Progress and results of the installation of all software included in the Support
Paq is logged to the file %SystemDrive%\cpqsystem\log\cpqsetup.log.  This file can be
viewed with any text editor.  Information for subsequent installations is
appended to this log file, providing a chronological history of installation
activity for all software installed by the Support Paq installation utilities.

----------------------------------------------------------------
Copyright 2000, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.