         C O M P A Q (R)  C O M P U T E R  C O R P O R A T I O N

                         Compaq Support Paq for
                         Microsoft .NET
                 

1.  INTRODUCTION

This file contains information regarding use of the Compaq Support Paq for
Microsoft .NET.  The following information is provided:

    Support Paq Installation
    Component Usage
    Log File Usage


2.  SUPPORT PAQ INSTALLATION

The primary method for installing the Support Paq is to run the SETUP.EXE
program included with the Support Paq.  By default, all software is selected 
for installation.  In most circumstances, this default selection should not be
altered, and installation is as simple as pressing the "Install" button.  Even
when selected, only software that is appropriate for the system it is being run
on will actually be installed.  Press the "Install" button to proceed with the
installation.  After installation of the appropriate software the utility will
display its results, including indication of software successfully installed,
software not needed for the current system configuration and any installation
failures.  For more information on the usage of SETUP.EXE, refer to the help
file (SETUP.HLP).

A BP000076.CMD file is also provided with the Support Paq for use
in installing the Support Paq from a command prompt without user interaction.
As with the SETUP.EXE program, all software appropriate for the system it is
being run on will be installed.

The Compaq Support Paq for Microsoft .NET contains numerous files.  All
files must be present in the same directory as the SETUP.EXE program in 
order for the Support Paq to be installed properly.

A console version of the setup application (SETUPC.EXE) is also provided as a
way to script installations of the Support Paq or components.  For more
information on its usage, refer to the help file (SETUPC.HLP).


3.	COMPONENT USAGE

In addition to the SETUP.EXE program mentioned above, the Support Paq contains
individual .EXE files corresponding to the various components that make up the
Support Paq. If necessary, these components can be installed individually or
their contents extracted to a floppy diskette for use during OS installation.

To install an individual component just run the appropriate CPxxxxx.EXE file 
and chose the "Install" button.

To extract the contents of a component to diskette run the appropriate 
CPxxxxx.EXE file, then chose the "Extract" button instead of the "Install" 
button.

3.1	COMPONENT CONFIGURATION

Component files now offer optional support configuration before they are
installed. The optional support configuration allows component-specific 
settings to be written into the .EXE file for availability during installation.

Configuration is performed using the CPCONFIG.EXE program included with the
Support Paq. When the program is executed, it displays a list of all components
in the current directory that support configuration. To configure a component,
click on the component name.

NOTE:	To configure a package, the configuration tool and Support Paq must be
in a write accessible location. A CD or read-only network share is not supported.

To know when a component was last configured, execute the component and view 
the date and time below the component name and version.

The following table specifies the Compaq software contained within and 
installed by each component. Components that have an asterisk (*) next to
their filename support configuration by the CPCONFIG.EXE program described
above:

cp001703.exe	Compaq iLO Advanced System Management Controller Driver for Windows 2000
cp001704.exe	Compaq Advanced System Management Controller Driver for Windows 2000
cp001378.exe	Compaq Integrated System Management Controller Driver for Windows 2000
cp001379.exe	Compaq System Management Controller Driver for Windows 2000
cp001588.exe	Compaq 32-Bit SCSI Controller Driver for Windows 2000
cp001612.exe	Compaq 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Windows 2000
cp001448.exe	Compaq Drive Array Driver for Windows 2000
cp001936.exe	Compaq Smart Array-2 Controllers Driver for Windows .NET
cp001701.exe	Compaq Smart Array 5x Controller Driver For Windows 2000
cp001811.exe	Compaq StorageWorks Fibre Channel Support for Windows 2000
cp001563.exe	Compaq CMD 0649 IDE Ultra DMA Controller Driver For Windows 2000
cp001698.exe	Compaq Integrated Ultra ATA-100 Dual Channel Driver For Windows 2000
cp001812.exe	Compaq ProLiant Storage System Driver for Windows 2000
cp001810.exe	Compaq Drive Array Notification for Windows 2000
cp001697.exe	Compaq Integrated ATA RAID Management Utility for Windows
cp001565.exe	Compaq Remote Monitor Service for Windows 2000
cp001699.exe	Compaq PCI Hot Plug Controller Driver for Windows 2000
cp001937.exe	Compaq Remote Insight Board Driver for Windows 2000
cp001809.exe	Compaq Integrated Lights-Out Management Interface Driver for Windows 2000
cp001682.exe	Compaq Remote Insight Lights-Out II Board Driver for Windows 2000
cp001683.exe	Compaq Rack Infrastructure Interface Service for Windows 2000
cp001566.exe	Compaq Integrated Management Display Utility for Windows 2000
cp001855.exe	Compaq Integrated Management Log Viewer for Windows 2000
cp001568.exe	Compaq Power Supply Viewer for Windows 2000
cp001569.exe	Compaq Power Down Manager for Windows 2000
cp001570.exe	Compaq Enhanced Integrated Management Display Service for Windows 2000
cp001954.exe	Compaq Array Configuration Utility for Windows 2000
cp001624.exe	Compaq NetFlex/Netelligent Adapter Driver for Windows 2000
cp001715.exe	Compaq NC31xx Ethernet or Fast Ethernet NIC Driver for Windows .NET
cp001716.exe	Compaq NC61xx/NC71xx Gigabit Ethernet NIC Driver for Windows .NET
cp001435.exe	Compaq NC67xx/NC77xx Gigabit Ethernet NIC Driver for Windows .NET
cp001667.exe	Compaq Network Teaming and Configuration for Windows .NET
cp001658.exe	Compaq Foundation Agents for Windows
cp001659.exe	Compaq Server Agents for Windows
cp001660.exe	Compaq Storage Agents for Windows
cp001661.exe	Compaq NIC Agents for Windows
cp001656.exe	Compaq Survey Utility for Windows

4.  LOG FILE USAGE

Progress and results of the installation of all software included in the Support
Paq is logged to the file %SystemDrive%\cpqsystem\log\cpqsetup.log.  This file can be
viewed with any text editor.  Information for subsequent installations is
appended to this log file, providing a chronological history of installation
activity for all software installed by the Support Paq installation utilities.

----------------------------------------------------------------
Copyright 2002, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
