Server Server Server Server Server Server Novell NetWare 6.0 Novell NetWare 5.1 Novell NetWare 4.2 Support Paq Support Paq Support Paq Support Paq Support Paq Support Paq ProLiant DL760 All Models ProLiant DL580 G2 (1133MHz+) (667-1000MHz) ProLiant DL380 G2 (1133MHz+) (667-1000MHz) ProLiant DL380 Packaged Cluster G2 (1266MHz) ProLiant DL360 G2 (1400MHz+) (667-1266MHz) ProLiant DL320 All Models ProLiant ML750 All Models ProLiant ML570 G2 (1133MHz+) (667-1000MHz) ProLiant ML530 G2 (2.4GHz+) (667-1000MHz) ProLiant ML370 G2 (1133MHz+) (667-1000MHz) ProLiant ML350 G2 (1133MHz+) (700MHz -1GHz) ProLiant ML330e All Models ProLiant ML330 G2 (1000MHz+) (667-999MHz) ProLiant 8500 All Models ProLiant 8000 All Models Compaq Support Paq for Novell NetWare (Japanese) - PRE-RELEASE Compaq Support Paq for Novell NetWare (日本語) - PRE-RELEASE Japanese 日本語 Important: The Compaq Support Paq for Novell NetWare contains numerous files. All files must be present in the same directory as the CPQDPLOY.NLM program or in order for the Support Paq to be installed properly.]]> Primary Installation Method
  • Run the CPQDPLOY.NLM program included with the Support Paq.
    • Note: By default, all software is selected for installation. In most circumstances, this default selection should not be altered. Note: Even when selected, only software that is appropriate for the system it is being run on will actually be installed. After the installation of the appropriate software, the utility will display its results, including indication of software successfully installed, software not needed for the current system configuration, and any installation failures.
]]> Important: The Compaq Support Paq for Novell NetWare contains numerous files. All files must be present in the same directory as the CPQDPLOY.NLM program or in order for the Support Paq to be installed properly.]]> Primary Installation Method
  • Run the CPQDPLOY.NLM program included with the Support Paq.
    • Note: By default, all software is selected for installation. In most circumstances, this default selection should not be altered. Note: Even when selected, only software that is appropriate for the system it is being run on will actually be installed. After the installation of the appropriate software, the utility will display its results, including indication of software successfully installed, software not needed for the current system configuration, and any installation failures.
]]> Important: The Compaq Support Paq for Novell NetWare contains numerous files. All files must be present in the same directory as the CPQDPLOY.NLM program or in order for the Support Paq to be installed properly.]]> Primary Installation Method
  • Run the CPQDPLOY.NLM program included with the Support Paq.
    • Note: By default, all software is selected for installation. In most circumstances, this default selection should not be altered. Note: Even when selected, only software that is appropriate for the system it is being run on will actually be installed. After the installation of the appropriate software, the utility will display its results, including indication of software successfully installed, software not needed for the current system configuration, and any installation failures.
]]> Important: The Compaq Support Paq for Novell NetWare contains numerous files. All files must be present in the same directory as the CPQDPLOY.NLM program or in order for the Support Paq to be installed properly.]]> Primary Installation Method
  • Run the CPQDPLOY.NLM program included with the Support Paq.
    • Note: By default, all software is selected for installation. In most circumstances, this default selection should not be altered. Note: Even when selected, only software that is appropriate for the system it is being run on will actually be installed. After the installation of the appropriate software, the utility will display its results, including indication of software successfully installed, software not needed for the current system configuration, and any installation failures.
]]> Important: The Compaq Support Paq for Novell NetWare contains numerous files. All files must be present in the same directory as the CPQDPLOY.NLM program or in order for the Support Paq to be installed properly.]]> Primary Installation Method
  • Run the CPQDPLOY.NLM program included with the Support Paq.
    • Note: By default, all software is selected for installation. In most circumstances, this default selection should not be altered. Note: Even when selected, only software that is appropriate for the system it is being run on will actually be installed. After the installation of the appropriate software, the utility will display its results, including indication of software successfully installed, software not needed for the current system configuration, and any installation failures.
]]> Important: The Compaq Support Paq for Novell NetWare contains numerous files. All files must be present in the same directory as the CPQDPLOY.NLM program or in order for the Support Paq to be installed properly.]]> Primary Installation Method
  • Run the CPQDPLOY.NLM program included with the Support Paq.
    • Note: By default, all software is selected for installation. In most circumstances, this default selection should not be altered. Note: Even when selected, only software that is appropriate for the system it is being run on will actually be installed. After the installation of the appropriate software, the utility will display its results, including indication of software successfully installed, software not needed for the current system configuration, and any installation failures.
]]> Compaq ACPI Platform Support Module for Novell NetWare 6.0 Version 1.00:
  • Provided the next generation of Multi-Processor Kernel support for Compaq's ProLiant Servers with Intel Pentium 4 or Xeon processor(s) with Hyper-Threading Technology.
]]> Compaq Server Health Driver for Novell NetWare Version 5.01:
  • Added support for logging NMI's to the Integrated Management Log due to Inter-module Bus errors.
  • Added processor pre-failure support for Intel Xeon Processors with Hyper-Threading.
  • Added support for new Compaq Servers.
]]> Compaq Remote Insight Board Driver for Novell NetWare Version 3.12:
  • Added support for the RILOE II card.
]]> Compaq Online Array Configuration Utility for Novell NetWare Version 2.64:
  • Added support for configuring multiple spares.
]]> Compaq Integrated Management Log Viewer Utility for Novell NetWare Version 1.14:
  • Updated the event translation text to IML spec version 1.17.
]]> Compaq Integrated Ultra ATA-100 Dual Channel Driver For Novell NetWare 5.1 Version 1.40:
  • Added support for SMART monitoring.
]]> Compaq Integrated ATA RAID Management Utility for Novell NetWare Version 4.03:
  • Modified to write both date and time to the log file.
]]> Compaq PCI Hot Plug Driver for Novell NetWare Version 3.13:
  • This version of the Compaq System Bus Driver (CPQSBD.NLM) contains support for the CIOBX hot plug controller. On systems utilizing CIOBX, on a hot add of an adapter in an empty bus, the hot plug driver will automatically change the bus mode and frequency to the maximum compatible value supported by both the adapter and the bus.
  • Updated to include new NCM.NLM and NCMCON.NLM from Novell.
]]> Compaq Storage Agents for Novell NetWare Version 5.40:
  • Base Storage subsystem - CPQSSSA.NLM
    • Added support for CPQSTSYS.MIB, ver 1.15
    • Added support for Redundent Server Option

    Drive-Array Storage subsystem - CPQDASA.NLM

    • Added support for CPQIDA.MIB, ver 1.22
    • Added support to blink all drives on a controller or logical drive

    SCSI Storage subsystem - CPQSCSA.NLM

    • Added support for CPQSCSI.MIB, ver 1.23
    • Added support for SCSI speed of SCSI-1
    • Added support for SCSI speed of Ultra 4
    • Added support for Adaptec Ultra 320 SCSI controller
    • Added support for whether the tape drive is part of a tape library
    • Added support for tape library firmware revision
    • Added support for new Tape Drive SNMP trap
    • Added support for new Tape Library SNMP trap

    Fibre Channel Storage Subsystem - CPQFCASA.NLM

    • Added support for CPQFC.MIB, ver 1.12
    • Added support for Compaq Tape in Compaq Smart Array Cluster Storage Controller
    • Added additional blink drive support to FC RAID Storage:
      • blink all hard drives with a logical drive
      • blink all hard drives connected to a RAID controller
    • Added support for multiple RAID spares
]]> Compaq ACPI Platform Support Module for Novell NetWare 6.0 Version 1.00:
  • Provided the next generation of Multi-Processor Kernel support for Compaq's ProLiant Servers with Intel Pentium 4 or Xeon processor(s) with Hyper-Threading Technology.
]]> Compaq Server Health Driver for Novell NetWare Version 5.01:
  • Added support for logging NMI's to the Integrated Management Log due to Inter-module Bus errors.
  • Added processor pre-failure support for Intel Xeon Processors with Hyper-Threading.
  • Added support for new Compaq Servers.
]]> Compaq Remote Insight Board Driver for Novell NetWare Version 3.12:
  • Added support for the RILOE II card.
]]> Compaq Online Array Configuration Utility for Novell NetWare Version 2.64:
  • Added support for configuring multiple spares.
]]> Compaq Integrated Management Log Viewer Utility for Novell NetWare Version 1.14:
  • Updated the event translation text to IML spec version 1.17.
]]> Compaq Integrated Ultra ATA-100 Dual Channel Driver For Novell NetWare 5.1 Version 1.40:
  • Added support for SMART monitoring.
]]> Compaq Integrated ATA RAID Management Utility for Novell NetWare Version 4.03:
  • Modified to write both date and time to the log file.
]]> Compaq PCI Hot Plug Driver for Novell NetWare Version 3.13:
  • This version of the Compaq System Bus Driver (CPQSBD.NLM) contains support for the CIOBX hot plug controller. On systems utilizing CIOBX, on a hot add of an adapter in an empty bus, the hot plug driver will automatically change the bus mode and frequency to the maximum compatible value supported by both the adapter and the bus.
  • Updated to include new NCM.NLM and NCMCON.NLM from Novell.
]]> Compaq Storage Agents for Novell NetWare Version 5.40:
  • Base Storage subsystem - CPQSSSA.NLM
    • Added support for CPQSTSYS.MIB, ver 1.15
    • Added support for Redundent Server Option

    Drive-Array Storage subsystem - CPQDASA.NLM

    • Added support for CPQIDA.MIB, ver 1.22
    • Added support to blink all drives on a controller or logical drive

    SCSI Storage subsystem - CPQSCSA.NLM

    • Added support for CPQSCSI.MIB, ver 1.23
    • Added support for SCSI speed of SCSI-1
    • Added support for SCSI speed of Ultra 4
    • Added support for Adaptec Ultra 320 SCSI controller
    • Added support for whether the tape drive is part of a tape library
    • Added support for tape library firmware revision
    • Added support for new Tape Drive SNMP trap
    • Added support for new Tape Library SNMP trap

    Fibre Channel Storage Subsystem - CPQFCASA.NLM

    • Added support for CPQFC.MIB, ver 1.12
    • Added support for Compaq Tape in Compaq Smart Array Cluster Storage Controller
    • Added additional blink drive support to FC RAID Storage:
      • blink all hard drives with a logical drive
      • blink all hard drives connected to a RAID controller
    • Added support for multiple RAID spares
]]> Compaq ACPI Platform Support Module for Novell NetWare 6.0 Version 1.00:
  • Provided the next generation of Multi-Processor Kernel support for Compaq's ProLiant Servers with Intel Pentium 4 or Xeon processor(s) with Hyper-Threading Technology.
]]> Compaq Server Health Driver for Novell NetWare Version 5.01:
  • Added support for logging NMI's to the Integrated Management Log due to Inter-module Bus errors.
  • Added processor pre-failure support for Intel Xeon Processors with Hyper-Threading.
  • Added support for new Compaq Servers.
]]> Compaq Remote Insight Board Driver for Novell NetWare Version 3.12:
  • Added support for the RILOE II card.
]]> Compaq Online Array Configuration Utility for Novell NetWare Version 2.64:
  • Added support for configuring multiple spares.
]]> Compaq Integrated Management Log Viewer Utility for Novell NetWare Version 1.14:
  • Updated the event translation text to IML spec version 1.17.
]]> Compaq Integrated Ultra ATA-100 Dual Channel Driver For Novell NetWare 5.1 Version 1.40:
  • Added support for SMART monitoring.
]]> Compaq Integrated ATA RAID Management Utility for Novell NetWare Version 4.03:
  • Modified to write both date and time to the log file.
]]> Compaq PCI Hot Plug Driver for Novell NetWare Version 3.13:
  • This version of the Compaq System Bus Driver (CPQSBD.NLM) contains support for the CIOBX hot plug controller. On systems utilizing CIOBX, on a hot add of an adapter in an empty bus, the hot plug driver will automatically change the bus mode and frequency to the maximum compatible value supported by both the adapter and the bus.
  • Updated to include new NCM.NLM and NCMCON.NLM from Novell.
]]> Compaq Storage Agents for Novell NetWare Version 5.40:
  • Base Storage subsystem - CPQSSSA.NLM
    • Added support for CPQSTSYS.MIB, ver 1.15
    • Added support for Redundent Server Option

    Drive-Array Storage subsystem - CPQDASA.NLM

    • Added support for CPQIDA.MIB, ver 1.22
    • Added support to blink all drives on a controller or logical drive

    SCSI Storage subsystem - CPQSCSA.NLM

    • Added support for CPQSCSI.MIB, ver 1.23
    • Added support for SCSI speed of SCSI-1
    • Added support for SCSI speed of Ultra 4
    • Added support for Adaptec Ultra 320 SCSI controller
    • Added support for whether the tape drive is part of a tape library
    • Added support for tape library firmware revision
    • Added support for new Tape Drive SNMP trap
    • Added support for new Tape Library SNMP trap

    Fibre Channel Storage Subsystem - CPQFCASA.NLM

    • Added support for CPQFC.MIB, ver 1.12
    • Added support for Compaq Tape in Compaq Smart Array Cluster Storage Controller
    • Added additional blink drive support to FC RAID Storage:
      • blink all hard drives with a logical drive
      • blink all hard drives connected to a RAID controller
    • Added support for multiple RAID spares
]]> Compaq ACPI Platform Support Module for Novell NetWare 6.0 Version 1.00:
  • Provided the next generation of Multi-Processor Kernel support for Compaq's ProLiant Servers with Intel Pentium 4 or Xeon processor(s) with Hyper-Threading Technology.
]]> Compaq Server Health Driver for Novell NetWare Version 5.01:
  • Added support for logging NMI's to the Integrated Management Log due to Inter-module Bus errors.
  • Added processor pre-failure support for Intel Xeon Processors with Hyper-Threading.
  • Added support for new Compaq Servers.
]]> Compaq Remote Insight Board Driver for Novell NetWare Version 3.12:
  • Added support for the RILOE II card.
]]> Compaq Online Array Configuration Utility for Novell NetWare Version 2.64:
  • Added support for configuring multiple spares.
]]> Compaq Integrated Management Log Viewer Utility for Novell NetWare Version 1.14:
  • Updated the event translation text to IML spec version 1.17.
]]> Compaq Integrated Ultra ATA-100 Dual Channel Driver For Novell NetWare 5.1 Version 1.40:
  • Added support for SMART monitoring.
]]> Compaq Integrated ATA RAID Management Utility for Novell NetWare Version 4.03:
  • Modified to write both date and time to the log file.
]]> Compaq PCI Hot Plug Driver for Novell NetWare Version 3.13:
  • This version of the Compaq System Bus Driver (CPQSBD.NLM) contains support for the CIOBX hot plug controller. On systems utilizing CIOBX, on a hot add of an adapter in an empty bus, the hot plug driver will automatically change the bus mode and frequency to the maximum compatible value supported by both the adapter and the bus.
  • Updated to include new NCM.NLM and NCMCON.NLM from Novell.
]]> Compaq Storage Agents for Novell NetWare Version 5.40:
  • Base Storage subsystem - CPQSSSA.NLM
    • Added support for CPQSTSYS.MIB, ver 1.15
    • Added support for Redundent Server Option

    Drive-Array Storage subsystem - CPQDASA.NLM

    • Added support for CPQIDA.MIB, ver 1.22
    • Added support to blink all drives on a controller or logical drive

    SCSI Storage subsystem - CPQSCSA.NLM

    • Added support for CPQSCSI.MIB, ver 1.23
    • Added support for SCSI speed of SCSI-1
    • Added support for SCSI speed of Ultra 4
    • Added support for Adaptec Ultra 320 SCSI controller
    • Added support for whether the tape drive is part of a tape library
    • Added support for tape library firmware revision
    • Added support for new Tape Drive SNMP trap
    • Added support for new Tape Library SNMP trap

    Fibre Channel Storage Subsystem - CPQFCASA.NLM

    • Added support for CPQFC.MIB, ver 1.12
    • Added support for Compaq Tape in Compaq Smart Array Cluster Storage Controller
    • Added additional blink drive support to FC RAID Storage:
      • blink all hard drives with a logical drive
      • blink all hard drives connected to a RAID controller
    • Added support for multiple RAID spares
]]> Compaq ACPI Platform Support Module for Novell NetWare 6.0 Version 1.00:
  • Provided the next generation of Multi-Processor Kernel support for Compaq's ProLiant Servers with Intel Pentium 4 or Xeon processor(s) with Hyper-Threading Technology.
]]> Compaq Server Health Driver for Novell NetWare Version 5.01:
  • Added support for logging NMI's to the Integrated Management Log due to Inter-module Bus errors.
  • Added processor pre-failure support for Intel Xeon Processors with Hyper-Threading.
  • Added support for new Compaq Servers.
]]> Compaq Remote Insight Board Driver for Novell NetWare Version 3.12:
  • Added support for the RILOE II card.
]]> Compaq Online Array Configuration Utility for Novell NetWare Version 2.64:
  • Added support for configuring multiple spares.
]]> Compaq Integrated Management Log Viewer Utility for Novell NetWare Version 1.14:
  • Updated the event translation text to IML spec version 1.17.
]]> Compaq Integrated Ultra ATA-100 Dual Channel Driver For Novell NetWare 5.1 Version 1.40:
  • Added support for SMART monitoring.
]]> Compaq Integrated ATA RAID Management Utility for Novell NetWare Version 4.03:
  • Modified to write both date and time to the log file.
]]> Compaq PCI Hot Plug Driver for Novell NetWare Version 3.13:
  • This version of the Compaq System Bus Driver (CPQSBD.NLM) contains support for the CIOBX hot plug controller. On systems utilizing CIOBX, on a hot add of an adapter in an empty bus, the hot plug driver will automatically change the bus mode and frequency to the maximum compatible value supported by both the adapter and the bus.
  • Updated to include new NCM.NLM and NCMCON.NLM from Novell.
]]> Compaq Storage Agents for Novell NetWare Version 5.40:
  • Base Storage subsystem - CPQSSSA.NLM
    • Added support for CPQSTSYS.MIB, ver 1.15
    • Added support for Redundent Server Option

    Drive-Array Storage subsystem - CPQDASA.NLM

    • Added support for CPQIDA.MIB, ver 1.22
    • Added support to blink all drives on a controller or logical drive

    SCSI Storage subsystem - CPQSCSA.NLM

    • Added support for CPQSCSI.MIB, ver 1.23
    • Added support for SCSI speed of SCSI-1
    • Added support for SCSI speed of Ultra 4
    • Added support for Adaptec Ultra 320 SCSI controller
    • Added support for whether the tape drive is part of a tape library
    • Added support for tape library firmware revision
    • Added support for new Tape Drive SNMP trap
    • Added support for new Tape Library SNMP trap

    Fibre Channel Storage Subsystem - CPQFCASA.NLM

    • Added support for CPQFC.MIB, ver 1.12
    • Added support for Compaq Tape in Compaq Smart Array Cluster Storage Controller
    • Added additional blink drive support to FC RAID Storage:
      • blink all hard drives with a logical drive
      • blink all hard drives connected to a RAID controller
    • Added support for multiple RAID spares
]]> Compaq ACPI Platform Support Module for Novell NetWare 6.0 Version 1.00:
  • Provided the next generation of Multi-Processor Kernel support for Compaq's ProLiant Servers with Intel Pentium 4 or Xeon processor(s) with Hyper-Threading Technology.
]]> Compaq Server Health Driver for Novell NetWare Version 5.01:
  • Added support for logging NMI's to the Integrated Management Log due to Inter-module Bus errors.
  • Added processor pre-failure support for Intel Xeon Processors with Hyper-Threading.
  • Added support for new Compaq Servers.
]]> Compaq Remote Insight Board Driver for Novell NetWare Version 3.12:
  • Added support for the RILOE II card.
]]> Compaq Online Array Configuration Utility for Novell NetWare Version 2.64:
  • Added support for configuring multiple spares.
]]> Compaq Integrated Management Log Viewer Utility for Novell NetWare Version 1.14:
  • Updated the event translation text to IML spec version 1.17.
]]> Compaq Integrated Ultra ATA-100 Dual Channel Driver For Novell NetWare 5.1 Version 1.40:
  • Added support for SMART monitoring.
]]> Compaq Integrated ATA RAID Management Utility for Novell NetWare Version 4.03:
  • Modified to write both date and time to the log file.
]]> Compaq PCI Hot Plug Driver for Novell NetWare Version 3.13:
  • This version of the Compaq System Bus Driver (CPQSBD.NLM) contains support for the CIOBX hot plug controller. On systems utilizing CIOBX, on a hot add of an adapter in an empty bus, the hot plug driver will automatically change the bus mode and frequency to the maximum compatible value supported by both the adapter and the bus.
  • Updated to include new NCM.NLM and NCMCON.NLM from Novell.
]]> Compaq Storage Agents for Novell NetWare Version 5.40:
  • Base Storage subsystem - CPQSSSA.NLM
    • Added support for CPQSTSYS.MIB, ver 1.15
    • Added support for Redundent Server Option

    Drive-Array Storage subsystem - CPQDASA.NLM

    • Added support for CPQIDA.MIB, ver 1.22
    • Added support to blink all drives on a controller or logical drive

    SCSI Storage subsystem - CPQSCSA.NLM

    • Added support for CPQSCSI.MIB, ver 1.23
    • Added support for SCSI speed of SCSI-1
    • Added support for SCSI speed of Ultra 4
    • Added support for Adaptec Ultra 320 SCSI controller
    • Added support for whether the tape drive is part of a tape library
    • Added support for tape library firmware revision
    • Added support for new Tape Drive SNMP trap
    • Added support for new Tape Library SNMP trap

    Fibre Channel Storage Subsystem - CPQFCASA.NLM

    • Added support for CPQFC.MIB, ver 1.12
    • Added support for Compaq Tape in Compaq Smart Array Cluster Storage Controller
    • Added additional blink drive support to FC RAID Storage:
      • blink all hard drives with a logical drive
      • blink all hard drives connected to a RAID controller
    • Added support for multiple RAID spares
]]> Compaq iLO Management Interface Driver for Novell NetWare Version 1.01:
  • Modified to prevent high CPU utilization when using a Management Information Base (MIB) walker.
]]> Compaq Integrated Ultra ATA-100 Dual Channel Driver For Novell NetWare 5.1 Version 1.40:
  • Modified to properly display the stripe size for RAID 1 arrays.
]]> Compaq Integrated ATA RAID Management Utility for Novell NetWare Version 4.03:
  • Modified error messages.
]]> Compaq Power Subsystem Utility for Novell NetWare Version 1.10:
  • Clarified message text for redundancy recommendations.
]]> Compaq Unified RAID Host Adapter Module Driver for Novell NetWare Version 2.02:
  • Modified to prevent ARCServe from hanging the server during load time while it tries to scan the busses for a tape drive.
]]> Compaq NIC Agents for Novell NetWare Version 5.40:
  • Fixed the information displayed by the Compaq NC67xx/NC77xx Teaming Driver (QASP.LAN).
]]> Compaq Storage Agents for Novell NetWare Version 5.40:
  • IDE Storage Subsystem - CPQIDESA.NLM:
    • Fixed an ABEND that occurred when a Non-Compaq CD ROM was used.
  • Fibre Channel Storage Subsystem - CPQFCASA.NLM:
    • Fixed to prevent the Fibre agent from shutting down when the FCTC has the default map disabled.
]]> Compaq iLO Management Interface Driver for Novell NetWare Version 1.01:
  • Modified to prevent high CPU utilization when using a Management Information Base (MIB) walker.
]]> Compaq Integrated Ultra ATA-100 Dual Channel Driver For Novell NetWare 5.1 Version 1.40:
  • Modified to properly display the stripe size for RAID 1 arrays.
]]> Compaq Integrated ATA RAID Management Utility for Novell NetWare Version 4.03:
  • Modified error messages.
]]> Compaq Power Subsystem Utility for Novell NetWare Version 1.10:
  • Clarified message text for redundancy recommendations.
]]> Compaq Unified RAID Host Adapter Module Driver for Novell NetWare Version 2.02:
  • Modified to prevent ARCServe from hanging the server during load time while it tries to scan the busses for a tape drive.
]]> Compaq NIC Agents for Novell NetWare Version 5.40:
  • Fixed the information displayed by the Compaq NC67xx/NC77xx Teaming Driver (QASP.LAN).
]]> Compaq Storage Agents for Novell NetWare Version 5.40:
  • IDE Storage Subsystem - CPQIDESA.NLM:
    • Fixed an ABEND that occurred when a Non-Compaq CD ROM was used.
  • Fibre Channel Storage Subsystem - CPQFCASA.NLM:
    • Fixed to prevent the Fibre agent from shutting down when the FCTC has the default map disabled.
]]> Compaq iLO Management Interface Driver for Novell NetWare Version 1.01:
  • Modified to prevent high CPU utilization when using a Management Information Base (MIB) walker.
]]> Compaq Integrated Ultra ATA-100 Dual Channel Driver For Novell NetWare 5.1 Version 1.40:
  • Modified to properly display the stripe size for RAID 1 arrays.
]]> Compaq Integrated ATA RAID Management Utility for Novell NetWare Version 4.03:
  • Modified error messages.
]]> Compaq Power Subsystem Utility for Novell NetWare Version 1.10:
  • Clarified message text for redundancy recommendations.
]]> Compaq Unified RAID Host Adapter Module Driver for Novell NetWare Version 2.02:
  • Modified to prevent ARCServe from hanging the server during load time while it tries to scan the busses for a tape drive.
]]> Compaq NIC Agents for Novell NetWare Version 5.40:
  • Fixed the information displayed by the Compaq NC67xx/NC77xx Teaming Driver (QASP.LAN).
]]> Compaq Storage Agents for Novell NetWare Version 5.40:
  • IDE Storage Subsystem - CPQIDESA.NLM:
    • Fixed an ABEND that occurred when a Non-Compaq CD ROM was used.
  • Fibre Channel Storage Subsystem - CPQFCASA.NLM:
    • Fixed to prevent the Fibre agent from shutting down when the FCTC has the default map disabled.
]]> Compaq iLO Management Interface Driver for Novell NetWare Version 1.01:
  • Modified to prevent high CPU utilization when using a Management Information Base (MIB) walker.
]]> Compaq Integrated Ultra ATA-100 Dual Channel Driver For Novell NetWare 5.1 Version 1.40:
  • Modified to properly display the stripe size for RAID 1 arrays.
]]> Compaq Integrated ATA RAID Management Utility for Novell NetWare Version 4.03:
  • Modified error messages.
]]> Compaq Power Subsystem Utility for Novell NetWare Version 1.10:
  • Clarified message text for redundancy recommendations.
]]> Compaq Unified RAID Host Adapter Module Driver for Novell NetWare Version 2.02:
  • Modified to prevent ARCServe from hanging the server during load time while it tries to scan the busses for a tape drive.
]]> Compaq NIC Agents for Novell NetWare Version 5.40:
  • Fixed the information displayed by the Compaq NC67xx/NC77xx Teaming Driver (QASP.LAN).
]]> Compaq Storage Agents for Novell NetWare Version 5.40:
  • IDE Storage Subsystem - CPQIDESA.NLM:
    • Fixed an ABEND that occurred when a Non-Compaq CD ROM was used.
  • Fibre Channel Storage Subsystem - CPQFCASA.NLM:
    • Fixed to prevent the Fibre agent from shutting down when the FCTC has the default map disabled.
]]> Compaq iLO Management Interface Driver for Novell NetWare Version 1.01:
  • Modified to prevent high CPU utilization when using a Management Information Base (MIB) walker.
]]> Compaq Integrated Ultra ATA-100 Dual Channel Driver For Novell NetWare 5.1 Version 1.40:
  • Modified to properly display the stripe size for RAID 1 arrays.
]]> Compaq Integrated ATA RAID Management Utility for Novell NetWare Version 4.03:
  • Modified error messages.
]]> Compaq Power Subsystem Utility for Novell NetWare Version 1.10:
  • Clarified message text for redundancy recommendations.
]]> Compaq Unified RAID Host Adapter Module Driver for Novell NetWare Version 2.02:
  • Modified to prevent ARCServe from hanging the server during load time while it tries to scan the busses for a tape drive.
]]> Compaq NIC Agents for Novell NetWare Version 5.40:
  • Fixed the information displayed by the Compaq NC67xx/NC77xx Teaming Driver (QASP.LAN).
]]> Compaq Storage Agents for Novell NetWare Version 5.40:
  • IDE Storage Subsystem - CPQIDESA.NLM:
    • Fixed an ABEND that occurred when a Non-Compaq CD ROM was used.
  • Fibre Channel Storage Subsystem - CPQFCASA.NLM:
    • Fixed to prevent the Fibre agent from shutting down when the FCTC has the default map disabled.
]]> Compaq iLO Management Interface Driver for Novell NetWare Version 1.01:
  • Modified to prevent high CPU utilization when using a Management Information Base (MIB) walker.
]]> Compaq Integrated Ultra ATA-100 Dual Channel Driver For Novell NetWare 5.1 Version 1.40:
  • Modified to properly display the stripe size for RAID 1 arrays.
]]> Compaq Integrated ATA RAID Management Utility for Novell NetWare Version 4.03:
  • Modified error messages.
]]> Compaq Power Subsystem Utility for Novell NetWare Version 1.10:
  • Clarified message text for redundancy recommendations.
]]> Compaq Unified RAID Host Adapter Module Driver for Novell NetWare Version 2.02:
  • Modified to prevent ARCServe from hanging the server during load time while it tries to scan the busses for a tape drive.
]]> Compaq NIC Agents for Novell NetWare Version 5.40:
  • Fixed the information displayed by the Compaq NC67xx/NC77xx Teaming Driver (QASP.LAN).
]]> Compaq Storage Agents for Novell NetWare Version 5.40:
  • IDE Storage Subsystem - CPQIDESA.NLM:
    • Fixed an ABEND that occurred when a Non-Compaq CD ROM was used.
  • Fibre Channel Storage Subsystem - CPQFCASA.NLM:
    • Fixed to prevent the Fibre agent from shutting down when the FCTC has the default map disabled.
]]> cp002170.nlm cp002171.nlm cp002172.nlm cp002173.nlm cp002174.nlm cp002175.nlm cp002178.nlm cp002179.nlm cp002180.nlm cp002181.nlm cp002182.nlm cp002184.nlm cp002185.nlm cp002187.nlm cp002188.nlm cp002189.nlm cp002190.nlm cp002191.nlm cp002192.nlm cp002193.nlm cp002177.nlm cp002195.nlm cp002194.nlm cp002196.nlm cp002197.nlm cp002199.nlm cp002200.nlm cp002201.nlm cp002202.nlm cp002203.nlm cp002204.nlm cp002205.nlm