Server Server Server Server Microsoft Windows 2000 Support Paq Support Paq Support Paq Support Paq ProLiant DL760 All Models ProLiant DL580 All Models ProLiant DL380 G2 (1133MHz+) All Models ProLiant DL360 All Models ProLiant DL320 All Models ProLiant ML750 All Models ProLiant ML570 All Models ProLiant ML530 All Models ProLiant ML370 G2 (1133MHz+) All Models ProLiant ML350 All Models ProLiant ML330e All Models ProLiant ML330 All Models ProLiant CL1850 All Models ProLiant CL380 All Models ProLiant 8500 All Models ProLiant 8000 All Models ProLiant 7000 All Models ProLiant 6500 All Models ProLiant 6400R All Models ProLiant 6000 All Models ProLiant 5500 All Models ProLiant 5000 All Models ProLiant 4500 All Models ProLiant 3000 All Models ProLiant 2500 All Models ProLiant 1850R All Models ProLiant 1600 All Models ProLiant 1500 All Models ProLiant 1200 All Models ProLiant 850R All Models ProLiant 800 All Models ProLiant 400 All Models Prosignia Server 740 All Models Prosignia Server 720 All Models ProSignia 200 All Models Compaq Support Paq for Microsoft Windows 2000 Support Paq Compaq pour Microsoft Windows 2000 Compaq Support Paq für Microsoft Windows 2000 Compaq Support Paq for Microsoft Windows 2000 English (US) Anglais (US) Englisch (US) 英語 Important: The Compaq Support Paq for Microsoft Windows 2000 contains numerous files. All files must be present in the same directory as the SETUP.EXE program or in order for the Support Paq to be installed properly.]]> Primary Installation Method

Run the SETUP.EXE program included with the Support Paq.

Note:

Click the Install> button to proceed with the installation.

Note:

]]> Command Prompt Installation

A BP000042.CMD file is also provided with the Support Paq for use in installing the Support Paq from a command prompt without user interaction. As with the SETUP.EXE program, all software appropriate for the system it is being run on will be installed.

]]> Important: The Compaq Support Paq for Microsoft Windows 2000 contains numerous files. All files must be present in the same directory as the SETUP.EXE program or in order for the Support Paq to be installed properly.]]> Primary Installation Method

Run the SETUP.EXE program included with the Support Paq.

Note:

Click the Install> button to proceed with the installation.

Note:

]]> Command Prompt Installation

A BP000042.CMD file is also provided with the Support Paq for use in installing the Support Paq from a command prompt without user interaction. As with the SETUP.EXE program, all software appropriate for the system it is being run on will be installed.

Run the SETUP.EXE program included with the Support Paq.

Note:

Click the Install> button to proceed with the installation.

Note:

]]> Command Prompt Installation

A BP000042.CMD file is also provided with the Support Paq for use in installing the Support Paq from a command prompt without user interaction. As with the SETUP.EXE program, all software appropriate for the system it is being run on will be installed.

Run the SETUP.EXE program included with the Support Paq.

Note:

Click the Install> button to proceed with the installation.

Note:

]]> Command Prompt Installation

A BP000042.CMD file is also provided with the Support Paq for use in installing the Support Paq from a command prompt without user interaction. As with the SETUP.EXE program, all software appropriate for the system it is being run on will be installed.

]]> Compaq Delivers the Next Generation SSDs: Compaq Support Paqs. This document is in Adobe Acrobat © .PDF file format. If you need the Acrobat Reader, visit Adobe Systems Inc..]]> Compaq Delivers the Next Generation SSDs: Compaq Support Paqs. This document is in Adobe Acrobat © .PDF file format. If you need the Acrobat Reader, visit Adobe Systems Inc..]]> Compaq Delivers the Next Generation SSDs: Compaq Support Paqs. This document is in Adobe Acrobat © .PDF file format. If you need the Acrobat Reader, visit Adobe Systems Inc..]]> Compaq Delivers the Next Generation SSDs: Compaq Support Paqs. This document is in Adobe Acrobat ｩ .PDF file format. If you need the Acrobat Reader, visit Adobe Systems Inc..]]> ProLiant Storage System Driver: Modified the driver and installer to prevent a system "blue screen" when performing a forced reinstall or upgrade.]]> ProLiant Storage System Driver: Modified the driver and installer to prevent a system "blue screen" when performing a forced reinstall or upgrade.]]> ProLiant Storage System Driver: Modified the driver and installer to prevent a system "blue screen" when performing a forced reinstall or upgrade.]]> ProLiant Storage System Driver: Modified the driver and installer to prevent a system "blue screen" when performing a forced reinstall or upgrade.]]> Compaq Survey Utility

Fixed a potential security issue in Compaq web-enabled management software.

]]> Compaq Advanced System Management Controller Driver

Corrected an issue with the Compaq System Shutdown Service consuming excessive processor time.
Corrected an issue with detecting and reporting single-bit correctable memory errors on the ProLiant 800 (configured with P14 or P18 ROM), Compaq ProLiant 1600 (configured with P08 ROM), or the Compaq ProLiant 1850R.
Modified the installion INF to prevent this driver from installing on Xeon models of the Compaq ProLiant 6000 and 7000 (P40 or P43 ROM). This driver is not supported on this system; the Compaq System Management Controller driver should be used instead.

]]> Compaq System Management Controller Driver

Corrected an issue with the Compaq System Shutdown service consuming excesive processor time.

]]> Compaq Integrated System Management Controller Driver

Corrected an issue with the Compaq System Shutdown Service consuming excessive processor time.

]]> Compaq Survey Utility

Fixed a potential security issue in Compaq web-enabled management software.

]]> Compaq Advanced System Management Controller Driver

Corrected an issue with the Compaq System Shutdown Service consuming excessive processor time.
Corrected an issue with detecting and reporting single-bit correctable memory errors on the ProLiant 800 (configured with P14 or P18 ROM), Compaq ProLiant 1600 (configured with P08 ROM), or the Compaq ProLiant 1850R.
Modified the installion INF to prevent this driver from installing on Xeon models of the Compaq ProLiant 6000 and 7000 (P40 or P43 ROM). This driver is not supported on this system; the Compaq System Management Controller driver should be used instead.

]]> Compaq System Management Controller Driver

Corrected an issue with the Compaq System Shutdown service consuming excesive processor time.

]]> Compaq Integrated System Management Controller Driver

Corrected an issue with the Compaq System Shutdown Service consuming excessive processor time.

]]> Compaq Survey Utility

Fixed a potential security issue in Compaq web-enabled management software.

]]> Compaq Advanced System Management Controller Driver

Corrected an issue with the Compaq System Shutdown Service consuming excessive processor time.
Corrected an issue with detecting and reporting single-bit correctable memory errors on the ProLiant 800 (configured with P14 or P18 ROM), Compaq ProLiant 1600 (configured with P08 ROM), or the Compaq ProLiant 1850R.
Modified the installion INF to prevent this driver from installing on Xeon models of the Compaq ProLiant 6000 and 7000 (P40 or P43 ROM). This driver is not supported on this system; the Compaq System Management Controller driver should be used instead.

]]> Compaq System Management Controller Driver

Corrected an issue with the Compaq System Shutdown service consuming excesive processor time.

]]> Compaq Integrated System Management Controller Driver

Corrected an issue with the Compaq System Shutdown Service consuming excessive processor time.

]]> Compaq Survey Utility

Fixed a potential security issue in Compaq web-enabled management software.

]]> Compaq Advanced System Management Controller Driver

Corrected an issue with the Compaq System Shutdown Service consuming excessive processor time.
Corrected an issue with detecting and reporting single-bit correctable memory errors on the ProLiant 800 (configured with P14 or P18 ROM), Compaq ProLiant 1600 (configured with P08 ROM), or the Compaq ProLiant 1850R.
Modified the installion INF to prevent this driver from installing on Xeon models of the Compaq ProLiant 6000 and 7000 (P40 or P43 ROM). This driver is not supported on this system; the Compaq System Management Controller driver should be used instead.

]]> Compaq System Management Controller Driver

Corrected an issue with the Compaq System Shutdown service consuming excesive processor time.

]]> Compaq Integrated System Management Controller Driver

Corrected an issue with the Compaq System Shutdown Service consuming excessive processor time.

]]> Compaq Server Agents For Windows

Corrected an issue which on rare occasions, the Compaq SmartStartTM 4.90 Compaq Insight Management Agents may fail to load in Microsoft Windows 2000 or Microsoft Windows NT 4.0. This issue may occur during the SmartStart 4.90 installation of the Compaq Support Paq or anytime the Compaq Insight Management Agents are restarted. A pop-up window reports this issue by displaying the following: “At least one service or driver failed during system startup - check Event Viewer” The Microsoft Windows NT 4.0 or Microsoft Windows 2000 Event Log also reports the issue: “Server Agents service hung on startup.” Without the Compaq Insight Management Agents, the Compaq Insight Manager console will report the server as “inaccessible”, the Compaq Insight Manager XE device status is “unknown”, and the Compaq Web Agent interface cannot be accessed from a browser.

]]> Compaq CMD 0649 IDE Ultra DMA Controller Driver For Windows 2000

There is no information available at this time, as this is the initial release.

]]> Compaq Server Agents For Windows

Corrected an issue which on rare occasions, the Compaq SmartStartTM 4.90 Compaq Insight Management Agents may fail to load in Microsoft Windows 2000 or Microsoft Windows NT 4.0. This issue may occur during the SmartStart 4.90 installation of the Compaq Support Paq or anytime the Compaq Insight Management Agents are restarted. A pop-up window reports this issue by displaying the following: “At least one service or driver failed during system startup - check Event Viewer” The Microsoft Windows NT 4.0 or Microsoft Windows 2000 Event Log also reports the issue: “Server Agents service hung on startup.” Without the Compaq Insight Management Agents, the Compaq Insight Manager console will report the server as “inaccessible”, the Compaq Insight Manager XE device status is “unknown”, and the Compaq Web Agent interface cannot be accessed from a browser.

]]> Compaq CMD 0649 IDE Ultra DMA Controller Driver For Windows 2000

There is no information available at this time, as this is the initial release.

]]> Compaq Server Agents For Windows

Corrected an issue which on rare occasions, the Compaq SmartStartTM 4.90 Compaq Insight Management Agents may fail to load in Microsoft Windows 2000 or Microsoft Windows NT 4.0. This issue may occur during the SmartStart 4.90 installation of the Compaq Support Paq or anytime the Compaq Insight Management Agents are restarted. A pop-up window reports this issue by displaying the following: “At least one service or driver failed during system startup - check Event Viewer” The Microsoft Windows NT 4.0 or Microsoft Windows 2000 Event Log also reports the issue: “Server Agents service hung on startup.” Without the Compaq Insight Management Agents, the Compaq Insight Manager console will report the server as “inaccessible”, the Compaq Insight Manager XE device status is “unknown”, and the Compaq Web Agent interface cannot be accessed from a browser.

]]> Compaq CMD 0649 IDE Ultra DMA Controller Driver For Windows 2000

There is no information available at this time, as this is the initial release.

]]> Compaq Server Agents For Windows

Corrected an issue which on rare occasions, the Compaq SmartStartTM 4.90 Compaq Insight Management Agents may fail to load in Microsoft Windows 2000 or Microsoft Windows NT 4.0. This issue may occur during the SmartStart 4.90 installation of the Compaq Support Paq or anytime the Compaq Insight Management Agents are restarted. A pop-up window reports this issue by displaying the following: “At least one service or driver failed during system startup - check Event Viewer” The Microsoft Windows NT 4.0 or Microsoft Windows 2000 Event Log also reports the issue: “Server Agents service hung on startup.” Without the Compaq Insight Management Agents, the Compaq Insight Manager console will report the server as “inaccessible”, the Compaq Insight Manager XE device status is “unknown”, and the Compaq Web Agent interface cannot be accessed from a browser.

]]> Compaq CMD 0649 IDE Ultra DMA Controller Driver For Windows 2000

There is no information available at this time, as this is the initial release.

]]> Compaq NIC Agents for Windows 2000

Added support for the Network Fault Tolerence Teaming for the TLAN-based NICs on Windows NT 4.0.

]]> Compaq Survey Utility

Modified uninstall script to remove unused legacy files.

]]> Compaq Foundation Agents

Added a common Cluster Agent.
Added support for Compaq OS Managment under Windows 2000.

]]> Compaq Storage Agents

Added support for the Compaq StorageWorks Fibre Channel Modular Data Router.
Added support for the Compaq StorageWorks TL891 DLX Mini-Library.
Added support for the Compaq 40/80 GB DLT tape drive.
Added support for the Microsoft Windows 2000 Service Pak 1.

]]> Compaq Server Agents

Added support for Universal Serial Bus.
Added support for GigaHertz processor speeds.
Added support for the ProLiant ML350.
Added support for the ProLiant DL320.

]]> Compaq NIC Agents for Windows 2000

Added support for the Network Fault Tolerence Teaming for the TLAN-based NICs on Windows NT 4.0.

]]> Compaq Survey Utility

Modified uninstall script to remove unused legacy files.

]]> Compaq Foundation Agents

Added a common Cluster Agent.
Added support for Compaq OS Managment under Windows 2000.

]]> Compaq Storage Agents

Added support for the Compaq StorageWorks Fibre Channel Modular Data Router.
Added support for the Compaq StorageWorks TL891 DLX Mini-Library.
Added support for the Compaq 40/80 GB DLT tape drive.
Added support for the Microsoft Windows 2000 Service Pak 1.

]]> Compaq Server Agents

Added support for Universal Serial Bus.
Added support for GigaHertz processor speeds.
Added support for the ProLiant ML350.
Added support for the ProLiant DL320.

]]> Compaq NIC Agents for Windows 2000

Added support for the Network Fault Tolerence Teaming for the TLAN-based NICs on Windows NT 4.0.

]]> Compaq Survey Utility

Modified uninstall script to remove unused legacy files.

]]> Compaq Foundation Agents

Added a common Cluster Agent.
Added support for Compaq OS Managment under Windows 2000.

]]> Compaq Storage Agents

Added support for the Compaq StorageWorks Fibre Channel Modular Data Router.
Added support for the Compaq StorageWorks TL891 DLX Mini-Library.
Added support for the Compaq 40/80 GB DLT tape drive.
Added support for the Microsoft Windows 2000 Service Pak 1.

]]> Compaq Server Agents

Added support for Universal Serial Bus.
Added support for GigaHertz processor speeds.
Added support for the ProLiant ML350.
Added support for the ProLiant DL320.

]]> Compaq NIC Agents for Windows 2000

Added support for the Network Fault Tolerence Teaming for the TLAN-based NICs on Windows NT 4.0.

]]> Compaq Survey Utility

Modified uninstall script to remove unused legacy files.

]]> Compaq Foundation Agents

Added a common Cluster Agent.
Added support for Compaq OS Managment under Windows 2000.

]]> Compaq Storage Agents

Added support for the Compaq StorageWorks Fibre Channel Modular Data Router.
Added support for the Compaq StorageWorks TL891 DLX Mini-Library.
Added support for the Compaq 40/80 GB DLT tape drive.
Added support for the Microsoft Windows 2000 Service Pak 1.

]]> Compaq Server Agents

Added support for Universal Serial Bus.
Added support for GigaHertz processor speeds.
Added support for the ProLiant ML350.
Added support for the ProLiant DL320.

]]> Compaq Server Agents

Fixed an issue with the Compaq Server Agents version 4.80 or earlier was resending old SNMP traps.
Fixed an issue with the Compaq Server Agents version 4.80 or earlier, were an invalid device status for Hot Plug PCI devices would show under Windows 2000.

]]> Compaq Storage Agents

Fixed an issue when a Compaq Server configured with a Compaq Smart Array 5300 Controller running Microsoft Windows NT Server 4.0 the Drive Array Information Agent is listed as Inactive instead of Active.
Fixed an issue with the Advanced Data Guarding was reporting "Fully Functional" even if the firmware on the Compaq Smart Array 5300 Controller disabled it. This condition is now reported correctly.
Fixed an issue with IDE disk drives on Microsoft Windows 2000 were the drive condition was always "other" and drive details were incomplete, the predictive failure was also disabled. All IDE disk drive information is now reported correctly.

]]> Compaq Foundation Agents

Fixed an issue where the Foundation Agents running would not allow the customer to format or partition a drive on an array control. This would also occur on an optical drive or some other removable media. The information is now gathered through a different method that allows those tasks to occur.
Fixed an issue in the applet (cpqlogin.jar), where the changing of account passwords (when logged in with administrator rights)with an invalid user name would result in a crash of the HMMO. Now the proper checks are in place and notifies the user that an invalid name was entered.

]]> Compaq Survey Utility

Fixed an issue with installing the Survey Utility from NT SmartStart.
Fixed an issue with installing the Survey Utility on a system where the Windows Operating System is on a drive other than the C: Drive.
Fixed an issue with the NT Clustering Node disappearing.

]]> Compaq Server Agents

Fixed an issue with the Compaq Server Agents version 4.80 or earlier was resending old SNMP traps.
Fixed an issue with the Compaq Server Agents version 4.80 or earlier, were an invalid device status for Hot Plug PCI devices would show under Windows 2000.

]]> Compaq Storage Agents

Fixed an issue when a Compaq Server configured with a Compaq Smart Array 5300 Controller running Microsoft Windows NT Server 4.0 the Drive Array Information Agent is listed as Inactive instead of Active.
Fixed an issue with the Advanced Data Guarding was reporting "Fully Functional" even if the firmware on the Compaq Smart Array 5300 Controller disabled it. This condition is now reported correctly.
Fixed an issue with IDE disk drives on Microsoft Windows 2000 were the drive condition was always "other" and drive details were incomplete, the predictive failure was also disabled. All IDE disk drive information is now reported correctly.

]]> Compaq Foundation Agents

Fixed an issue where the Foundation Agents running would not allow the customer to format or partition a drive on an array control. This would also occur on an optical drive or some other removable media. The information is now gathered through a different method that allows those tasks to occur.
Fixed an issue in the applet (cpqlogin.jar), where the changing of account passwords (when logged in with administrator rights)with an invalid user name would result in a crash of the HMMO. Now the proper checks are in place and notifies the user that an invalid name was entered.

]]> Compaq Survey Utility

Fixed an issue with installing the Survey Utility from NT SmartStart.
Fixed an issue with installing the Survey Utility on a system where the Windows Operating System is on a drive other than the C: Drive.
Fixed an issue with the NT Clustering Node disappearing.

]]> Compaq Server Agents

Fixed an issue with the Compaq Server Agents version 4.80 or earlier was resending old SNMP traps.
Fixed an issue with the Compaq Server Agents version 4.80 or earlier, were an invalid device status for Hot Plug PCI devices would show under Windows 2000.

]]> Compaq Storage Agents

Fixed an issue when a Compaq Server configured with a Compaq Smart Array 5300 Controller running Microsoft Windows NT Server 4.0 the Drive Array Information Agent is listed as Inactive instead of Active.
Fixed an issue with the Advanced Data Guarding was reporting "Fully Functional" even if the firmware on the Compaq Smart Array 5300 Controller disabled it. This condition is now reported correctly.
Fixed an issue with IDE disk drives on Microsoft Windows 2000 were the drive condition was always "other" and drive details were incomplete, the predictive failure was also disabled. All IDE disk drive information is now reported correctly.

]]> Compaq Foundation Agents

Fixed an issue where the Foundation Agents running would not allow the customer to format or partition a drive on an array control. This would also occur on an optical drive or some other removable media. The information is now gathered through a different method that allows those tasks to occur.
Fixed an issue in the applet (cpqlogin.jar), where the changing of account passwords (when logged in with administrator rights)with an invalid user name would result in a crash of the HMMO. Now the proper checks are in place and notifies the user that an invalid name was entered.

]]> Compaq Survey Utility

Fixed an issue with installing the Survey Utility from NT SmartStart.
Fixed an issue with installing the Survey Utility on a system where the Windows Operating System is on a drive other than the C: Drive.
Fixed an issue with the NT Clustering Node disappearing.

]]> Compaq Server Agents

Fixed an issue with the Compaq Server Agents version 4.80 or earlier was resending old SNMP traps.
Fixed an issue with the Compaq Server Agents version 4.80 or earlier, were an invalid device status for Hot Plug PCI devices would show under Windows 2000.

]]> Compaq Storage Agents

Fixed an issue when a Compaq Server configured with a Compaq Smart Array 5300 Controller running Microsoft Windows NT Server 4.0 the Drive Array Information Agent is listed as Inactive instead of Active.
Fixed an issue with the Advanced Data Guarding was reporting "Fully Functional" even if the firmware on the Compaq Smart Array 5300 Controller disabled it. This condition is now reported correctly.
Fixed an issue with IDE disk drives on Microsoft Windows 2000 were the drive condition was always "other" and drive details were incomplete, the predictive failure was also disabled. All IDE disk drive information is now reported correctly.

]]> Compaq Foundation Agents

Fixed an issue where the Foundation Agents running would not allow the customer to format or partition a drive on an array control. This would also occur on an optical drive or some other removable media. The information is now gathered through a different method that allows those tasks to occur.
Fixed an issue in the applet (cpqlogin.jar), where the changing of account passwords (when logged in with administrator rights)with an invalid user name would result in a crash of the HMMO. Now the proper checks are in place and notifies the user that an invalid name was entered.

]]> Compaq Survey Utility

Fixed an issue with installing the Survey Utility from NT SmartStart.
Fixed an issue with installing the Survey Utility on a system where the Windows Operating System is on a drive other than the C: Drive.
Fixed an issue with the NT Clustering Node disappearing.

]]> Compaq 66MHz/64bit Dual Channel Wide Ultra3 SCSI Adapter Driver Added the latest file from Adaptec. ]]> Compaq Array Configuration Utility Added support for the Compaq RAID LC2 Controller.]]> Compaq Smart Array-2 Controllers Driver Added support for the Compaq RAID LC2 Controller.]]> Compaq Advanced System Management Controller Driver Added support to shut down the system if critical fans are removed after the Power On Self Test (POST) completes but before the System Management driver loads. The following Compaq systems are affected:

ProLiant DL580
ProLiant ML570
ProLiant ML530
ProLiant DL380
ProLiant DL360
ProLiant ML370
ProLiant ML350
ProLiant ML330
ProLiant CL380
ProLiant 6500 (Pentium II Xeon or later models with P11 ROM)
ProLiant 6400R
ProLiant 5500 (Pentium II or later models with the P12 ROM)
ProLiant 3000 (Pentium II or later models with the P09 ROM)
ProLiant 1850R
ProLiant 1600 (Pentium II or later models with the P08 ROM)
ProLiant 800 (Pentium II or later models with the P14 or P18 ROM)
ProLiant 400
Prosignia Server 740
Prosignia Server 720

]]> Compaq NIC Agents Added trap numbers to trap messages.]]> Compaq Server Agents Added support for 800, 866, and 933 MHz processor speeds.]]> Compaq Storage Agents

Added support for the Compaq RAID LC2 Controller with one LVDS SCSI channel configured as RAID.
Added support for the Compaq Tape Array 1000 which contains ten hot plug AIT 50 tape drives.
Added support for the Compaq SSL2020TL Tape Library which contains two AIT 50 tape drives.
Added support for the Compaq Smart Array 5300 Controller with two or four Wide Ultra3 SCSI channels.

ProLiant DL580
ProLiant ML570
ProLiant ML530
ProLiant DL380
ProLiant DL360
ProLiant ML370
ProLiant ML350
ProLiant ML330
ProLiant CL380
ProLiant 6500 (Pentium II Xeon or later models with P11 ROM)
ProLiant 6400R
ProLiant 5500 (Pentium II or later models with the P12 ROM)
ProLiant 3000 (Pentium II or later models with the P09 ROM)
ProLiant 1850R
ProLiant 1600 (Pentium II or later models with the P08 ROM)
ProLiant 800 (Pentium II or later models with the P14 or P18 ROM)
ProLiant 400
Prosignia Server 740
Prosignia Server 720

]]> Compaq NIC Agents Added trap numbers to trap messages.]]> Compaq Server Agents Added support for 800, 866, and 933 MHz processor speeds.]]> Compaq Storage Agents

Added support for the Compaq RAID LC2 Controller with one LVDS SCSI channel configured as RAID.
Added support for the Compaq Tape Array 1000 which contains ten hot plug AIT 50 tape drives.
Added support for the Compaq SSL2020TL Tape Library which contains two AIT 50 tape drives.
Added support for the Compaq Smart Array 5300 Controller with two or four Wide Ultra3 SCSI channels.

ProLiant DL580
ProLiant ML570
ProLiant ML530
ProLiant DL380
ProLiant DL360
ProLiant ML370
ProLiant ML350
ProLiant ML330
ProLiant CL380
ProLiant 6500 (Pentium II Xeon or later models with P11 ROM)
ProLiant 6400R
ProLiant 5500 (Pentium II or later models with the P12 ROM)
ProLiant 3000 (Pentium II or later models with the P09 ROM)
ProLiant 1850R
ProLiant 1600 (Pentium II or later models with the P08 ROM)
ProLiant 800 (Pentium II or later models with the P14 or P18 ROM)
ProLiant 400
Prosignia Server 740
Prosignia Server 720

]]> Compaq NIC Agents Added trap numbers to trap messages.]]> Compaq Server Agents Added support for 800, 866, and 933 MHz processor speeds.]]> Compaq Storage Agents

Added support for the Compaq RAID LC2 Controller with one LVDS SCSI channel configured as RAID.
Added support for the Compaq Tape Array 1000 which contains ten hot plug AIT 50 tape drives.
Added support for the Compaq SSL2020TL Tape Library which contains two AIT 50 tape drives.
Added support for the Compaq Smart Array 5300 Controller with two or four Wide Ultra3 SCSI channels.

ProLiant DL580
ProLiant ML570
ProLiant ML530
ProLiant DL380
ProLiant DL360
ProLiant ML370
ProLiant ML350
ProLiant ML330
ProLiant CL380
ProLiant 6500 (Pentium II Xeon or later models with P11 ROM)
ProLiant 6400R
ProLiant 5500 (Pentium II or later models with the P12 ROM)
ProLiant 3000 (Pentium II or later models with the P09 ROM)
ProLiant 1850R
ProLiant 1600 (Pentium II or later models with the P08 ROM)
ProLiant 800 (Pentium II or later models with the P14 or P18 ROM)
ProLiant 400
Prosignia Server 740
Prosignia Server 720

]]> Compaq NIC Agents Added trap numbers to trap messages.]]> Compaq Server Agents Added support for 800, 866, and 933 MHz processor speeds.]]> Compaq Storage Agents

Added support for the Compaq RAID LC2 Controller with one LVDS SCSI channel configured as RAID.
Added support for the Compaq Tape Array 1000 which contains ten hot plug AIT 50 tape drives.
Added support for the Compaq SSL2020TL Tape Library which contains two AIT 50 tape drives.
Added support for the Compaq Smart Array 5300 Controller with two or four Wide Ultra3 SCSI channels.

]]> Compaq 32-Bit SCSI Controller Driver Corrected an issue involving the Compaq CD Storage System when ScsiExpressed is installed. ]]> Compaq Advanced System Management Controller Driver

Corrected the display of the operating system name visible through the Compaq Integrated Management Display (IMD) to read "Microsoft Windows 2000" instead of "Windows NT 5.0". This change can be viewed on the IMD at Main Menu : Admin. Info : Server : OS.
Corrected an Automatic Server Recovery (ASR) issue on the Compaq ProLiant 400 and Compaq ProSignia Server 720. ASR was not enabled on these systems unless it was explicitly enabled through Compaq Insight Manager.

]]> Compaq System Management Controller Driver Corrected the display of the operating system name visible through the Compaq Integrated Management Display (IMD) to read "Microsoft Windows 2000" instead of "Windows NT 5.0". This change can be viewed on the IMD at Main Menu : Admin. Info : Server : OS.]]> Compaq Integrated System Management Controller Driver

Corrected the display of the operating system name visible through the Compaq Integrated Management Display (IMD) to read "Microsoft Windows 2000" instead of "Windows NT 5.0". This change can be viewed on the IMD at Main Menu : Admin. Info : Server : OS.
Corrected a driver issue that would cause a BugCheck when the driver attempted to log a correctable memory error. This issue affects the Compaq ProLiant 4500.

]]> Compaq Foundation Agents Fixed an issue where the Foundation Agents running would not allow the customer to format or partition a drive on an array control. This would also occur on an optical drive or some other removable media. The information is now gathered through a different method that allows those tasks to occur.]]> Compaq Server Agents

Fixed a problem in which Compaq Server Agents for Windows Version 4.70 (or earlier) would not repair Critical Error Log or Corrected Memory Log errors that occurred during the year 2000.
Fixed a problem in which Compaq Server Agents for Windows Version 4.70 (or earlier) would not send an ASR Recovery Complete trap on ProLiant ML330 servers.

]]> Compaq Storage Agents Fixed a problem in which the Compaq Storage Agents for Windows Version 4.70 would abnormally shut down when a Smart Array 4200 Controller was installed in a higher numbered slot than another Smart Array 3200 Controller installed in a lower numbered slot. ]]> Compaq 32-Bit SCSI Controller Driver Corrected an issue involving the Compaq CD Storage System when ScsiExpressed is installed. ]]> Compaq Advanced System Management Controller Driver

Corrected the display of the operating system name visible through the Compaq Integrated Management Display (IMD) to read "Microsoft Windows 2000" instead of "Windows NT 5.0". This change can be viewed on the IMD at Main Menu : Admin. Info : Server : OS.
Corrected an Automatic Server Recovery (ASR) issue on the Compaq ProLiant 400 and Compaq ProSignia Server 720. ASR was not enabled on these systems unless it was explicitly enabled through Compaq Insight Manager.

Corrected the display of the operating system name visible through the Compaq Integrated Management Display (IMD) to read "Microsoft Windows 2000" instead of "Windows NT 5.0". This change can be viewed on the IMD at Main Menu : Admin. Info : Server : OS.
Corrected a driver issue that would cause a BugCheck when the driver attempted to log a correctable memory error. This issue affects the Compaq ProLiant 4500.

Fixed a problem in which Compaq Server Agents for Windows Version 4.70 (or earlier) would not repair Critical Error Log or Corrected Memory Log errors that occurred during the year 2000.
Fixed a problem in which Compaq Server Agents for Windows Version 4.70 (or earlier) would not send an ASR Recovery Complete trap on ProLiant ML330 servers.

Corrected the display of the operating system name visible through the Compaq Integrated Management Display (IMD) to read "Microsoft Windows 2000" instead of "Windows NT 5.0". This change can be viewed on the IMD at Main Menu : Admin. Info : Server : OS.
Corrected an Automatic Server Recovery (ASR) issue on the Compaq ProLiant 400 and Compaq ProSignia Server 720. ASR was not enabled on these systems unless it was explicitly enabled through Compaq Insight Manager.

Corrected the display of the operating system name visible through the Compaq Integrated Management Display (IMD) to read "Microsoft Windows 2000" instead of "Windows NT 5.0". This change can be viewed on the IMD at Main Menu : Admin. Info : Server : OS.
Corrected a driver issue that would cause a BugCheck when the driver attempted to log a correctable memory error. This issue affects the Compaq ProLiant 4500.

Fixed a problem in which Compaq Server Agents for Windows Version 4.70 (or earlier) would not repair Critical Error Log or Corrected Memory Log errors that occurred during the year 2000.
Fixed a problem in which Compaq Server Agents for Windows Version 4.70 (or earlier) would not send an ASR Recovery Complete trap on ProLiant ML330 servers.

Corrected the display of the operating system name visible through the Compaq Integrated Management Display (IMD) to read "Microsoft Windows 2000" instead of "Windows NT 5.0". This change can be viewed on the IMD at Main Menu : Admin. Info : Server : OS.
Corrected an Automatic Server Recovery (ASR) issue on the Compaq ProLiant 400 and Compaq ProSignia Server 720. ASR was not enabled on these systems unless it was explicitly enabled through Compaq Insight Manager.

Corrected the display of the operating system name visible through the Compaq Integrated Management Display (IMD) to read "Microsoft Windows 2000" instead of "Windows NT 5.0". This change can be viewed on the IMD at Main Menu : Admin. Info : Server : OS.
Corrected a driver issue that would cause a BugCheck when the driver attempted to log a correctable memory error. This issue affects the Compaq ProLiant 4500.

Fixed a problem in which Compaq Server Agents for Windows Version 4.70 (or earlier) would not repair Critical Error Log or Corrected Memory Log errors that occurred during the year 2000.
Fixed a problem in which Compaq Server Agents for Windows Version 4.70 (or earlier) would not send an ASR Recovery Complete trap on ProLiant ML330 servers.

Compaq ProLiant CL380

Compaq ProLiant DL360

Compaq ProLiant DL580

Compaq ProLiant ML330

Compaq ProLiant ML570

Compaq NC3134 Fast Ethernet NIC

Compaq NC3135 Fast Ethernet Upgrade Module

Compaq 66MHz/64bit Wide Ultra3 SCSI Adapter]]> Compaq 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver (ADPU160M.SYS)

Added support for the new Compaq 66MHz/64bit Wide Ultra3 SCSI Adapter.

]]> Compaq Ethernet or Fast Ethernet NIC NT Driver (N100NT5.SYS)

Added support for the following Compaq NICs:

Compaq NC3134 Fast Ethernet NIC
Compaq NC3135 Fast Ethernet Upgrade Module

]]> Compaq Network Teaming and Configuration (CPQTEAM.SYS)

Created to support teaming in a Windows 2000 environment.

]]> Compaq Remote Insight Board Driver(CPQRIB.SYS)

Created to support the Remote Insight Lights-Out Edition in a Windows 2000 environment.

]]> Compaq Foundation Agents for Windows

Added additional support for Compaq Insight Manager XE.

]]> Compaq NIC Agents for Windows

Added support for Network Fault Tolerance Teaming for TLAN-based NICs on Windows 2000.

]]> Compaq Server Agents for Windows

Added support for the following Compaq servers:

Compaq ProLiant ML330
Compaq ProLiant DL360
Compaq ProLiant CL380
Compaq ProLiant ML570
Compaq ProLiant DL580

Added support for 800MHz Pentium III processor speeds on previously released ProLiant servers.

]]> Compaq Storage Agents for Windows

Added support for Ultra3 disk drives.
Added support for Fibre Channel tape drives and libraries on Microsoft Windows 2000.

]]>

Compaq ProLiant CL380

Compaq ProLiant DL360

Compaq ProLiant DL580

Compaq ProLiant ML330

Compaq ProLiant ML570

Compaq NC3134 Fast Ethernet NIC

Compaq NC3135 Fast Ethernet Upgrade Module

Compaq 66MHz/64bit Wide Ultra3 SCSI Adapter]]> Compaq 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver (ADPU160M.SYS)

Added support for the new Compaq 66MHz/64bit Wide Ultra3 SCSI Adapter.

]]> Compaq Ethernet or Fast Ethernet NIC NT Driver (N100NT5.SYS)

Added support for the following Compaq NICs:

Compaq NC3134 Fast Ethernet NIC
Compaq NC3135 Fast Ethernet Upgrade Module

]]> Compaq Network Teaming and Configuration (CPQTEAM.SYS)

Created to support teaming in a Windows 2000 environment.

]]> Compaq Remote Insight Board Driver(CPQRIB.SYS)

Created to support the Remote Insight Lights-Out Edition in a Windows 2000 environment.

]]> Compaq Foundation Agents for Windows

Added additional support for Compaq Insight Manager XE.

]]> Compaq NIC Agents for Windows

Added support for Network Fault Tolerance Teaming for TLAN-based NICs on Windows 2000.

]]> Compaq Server Agents for Windows

Added support for the following Compaq servers:

Compaq ProLiant ML330
Compaq ProLiant DL360
Compaq ProLiant CL380
Compaq ProLiant ML570
Compaq ProLiant DL580

Added support for 800MHz Pentium III processor speeds on previously released ProLiant servers.

]]> Compaq Storage Agents for Windows

Added support for Ultra3 disk drives.
Added support for Fibre Channel tape drives and libraries on Microsoft Windows 2000.

]]>

Compaq ProLiant CL380

Compaq ProLiant DL360

Compaq ProLiant DL580

Compaq ProLiant ML330

Compaq ProLiant ML570

Compaq NC3134 Fast Ethernet NIC

Compaq NC3135 Fast Ethernet Upgrade Module

Compaq 66MHz/64bit Wide Ultra3 SCSI Adapter]]> Compaq 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver (ADPU160M.SYS)

Added support for the new Compaq 66MHz/64bit Wide Ultra3 SCSI Adapter.

]]> Compaq Ethernet or Fast Ethernet NIC NT Driver (N100NT5.SYS)

Added support for the following Compaq NICs:

Compaq NC3134 Fast Ethernet NIC
Compaq NC3135 Fast Ethernet Upgrade Module

]]> Compaq Network Teaming and Configuration (CPQTEAM.SYS)

Created to support teaming in a Windows 2000 environment.

]]> Compaq Remote Insight Board Driver(CPQRIB.SYS)

Created to support the Remote Insight Lights-Out Edition in a Windows 2000 environment.

]]> Compaq Foundation Agents for Windows

Added additional support for Compaq Insight Manager XE.

]]> Compaq NIC Agents for Windows

Added support for Network Fault Tolerance Teaming for TLAN-based NICs on Windows 2000.

]]> Compaq Server Agents for Windows

Added support for the following Compaq servers:

Compaq ProLiant ML330
Compaq ProLiant DL360
Compaq ProLiant CL380
Compaq ProLiant ML570
Compaq ProLiant DL580

Added support for 800MHz Pentium III processor speeds on previously released ProLiant servers.

]]> Compaq Storage Agents for Windows

Added support for Ultra3 disk drives.
Added support for Fibre Channel tape drives and libraries on Microsoft Windows 2000.

]]>

Compaq ProLiant CL380

Compaq ProLiant DL360

Compaq ProLiant DL580

Compaq ProLiant ML330

Compaq ProLiant ML570

Compaq NC3134 Fast Ethernet NIC

Compaq NC3135 Fast Ethernet Upgrade Module

Compaq 66MHz/64bit Wide Ultra3 SCSI Adapter]]> Compaq 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver (ADPU160M.SYS)

Added support for the new Compaq 66MHz/64bit Wide Ultra3 SCSI Adapter.

]]> Compaq Ethernet or Fast Ethernet NIC NT Driver (N100NT5.SYS)

Added support for the following Compaq NICs:

Compaq NC3134 Fast Ethernet NIC
Compaq NC3135 Fast Ethernet Upgrade Module

]]> Compaq Network Teaming and Configuration (CPQTEAM.SYS)

Created to support teaming in a Windows 2000 environment.

]]> Compaq Remote Insight Board Driver(CPQRIB.SYS)

Created to support the Remote Insight Lights-Out Edition in a Windows 2000 environment.

]]> Compaq Foundation Agents for Windows

Added additional support for Compaq Insight Manager XE.

]]> Compaq NIC Agents for Windows

Added support for Network Fault Tolerance Teaming for TLAN-based NICs on Windows 2000.

]]> Compaq Server Agents for Windows

Added support for the following Compaq servers:

Compaq ProLiant ML330
Compaq ProLiant DL360
Compaq ProLiant CL380
Compaq ProLiant ML570
Compaq ProLiant DL580

Added support for 800MHz Pentium III processor speeds on previously released ProLiant servers.

]]> Compaq Storage Agents for Windows

Added support for Ultra3 disk drives.
Added support for Fibre Channel tape drives and libraries on Microsoft Windows 2000.

]]> Compaq 32-Bit SCSI Controller Driver (CPQ32FS2.SYS)

Corrected an incompatibility with VERITAS which caused a system lockup or blue screen to occur during initialization.

]]> Compaq Smart Array-2 Controllers Driver (CPQARRY2.SYS)

Modified to prevent the return of a truncated string, "Compaq StorageWorks Integrated Smart Array/42xx/43x Controllers SCSI Miniport Dri", description in the I/O control.
Modified so that Windows 2000 Event Log no longer reports an error against the driver during every reboot.

]]> Compaq StorageWorks Fibre Channel Host Controllers SCSI Miniport Driver (CPQFCALM.SYS)

Corrected the issue of a Fibre Channel Manager error message when a hot plugged controller is present.

]]> Compaq Smart Component Installers

Corrected a false summary screen message, "will not attempt to install" in the Smart Component Installer.
Modified the installation to correct a "file missing" error message.

]]> Compaq System Management Driver

Corrected an issue with the Microsoft Windows 2000 Automatic Reboot after a STOP error is received when the System Management drivers are loaded. This setting is located at Control Panel/System/Advanced/Startup and Recovery/ Automatically reboot. Previous versions of the driver would cause the system to hang during the reboot attempt. This issue affects all Compaq servers that are supported by the Compaq Support Paq for Microsoft Windows 2000 product.

]]> Compaq 32-Bit SCSI Controller Driver (CPQ32FS2.SYS)

Corrected an incompatibility with VERITAS which caused a system lockup or blue screen to occur during initialization.

]]> Compaq Smart Array-2 Controllers Driver (CPQARRY2.SYS)

Modified to prevent the return of a truncated string, "Compaq StorageWorks Integrated Smart Array/42xx/43x Controllers SCSI Miniport Dri", description in the I/O control.
Modified so that Windows 2000 Event Log no longer reports an error against the driver during every reboot.

]]> Compaq StorageWorks Fibre Channel Host Controllers SCSI Miniport Driver (CPQFCALM.SYS)

Corrected the issue of a Fibre Channel Manager error message when a hot plugged controller is present.

]]> Compaq Smart Component Installers

Corrected a false summary screen message, "will not attempt to install" in the Smart Component Installer.
Modified the installation to correct a "file missing" error message.

]]> Compaq System Management Driver

Corrected an issue with the Microsoft Windows 2000 Automatic Reboot after a STOP error is received when the System Management drivers are loaded. This setting is located at Control Panel/System/Advanced/Startup and Recovery/ Automatically reboot. Previous versions of the driver would cause the system to hang during the reboot attempt. This issue affects all Compaq servers that are supported by the Compaq Support Paq for Microsoft Windows 2000 product.

]]> Compaq 32-Bit SCSI Controller Driver (CPQ32FS2.SYS)

Corrected an incompatibility with VERITAS which caused a system lockup or blue screen to occur during initialization.

]]> Compaq Smart Array-2 Controllers Driver (CPQARRY2.SYS)

Modified to prevent the return of a truncated string, "Compaq StorageWorks Integrated Smart Array/42xx/43x Controllers SCSI Miniport Dri", description in the I/O control.
Modified so that Windows 2000 Event Log no longer reports an error against the driver during every reboot.

]]> Compaq StorageWorks Fibre Channel Host Controllers SCSI Miniport Driver (CPQFCALM.SYS)

Corrected the issue of a Fibre Channel Manager error message when a hot plugged controller is present.

]]> Compaq Smart Component Installers

Corrected a false summary screen message, "will not attempt to install" in the Smart Component Installer.
Modified the installation to correct a "file missing" error message.

]]> Compaq System Management Driver

Corrected an issue with the Microsoft Windows 2000 Automatic Reboot after a STOP error is received when the System Management drivers are loaded. This setting is located at Control Panel/System/Advanced/Startup and Recovery/ Automatically reboot. Previous versions of the driver would cause the system to hang during the reboot attempt. This issue affects all Compaq servers that are supported by the Compaq Support Paq for Microsoft Windows 2000 product.

]]> Compaq 32-Bit SCSI Controller Driver (CPQ32FS2.SYS)

Corrected an incompatibility with VERITAS which caused a system lockup or blue screen to occur during initialization.

]]> Compaq Smart Array-2 Controllers Driver (CPQARRY2.SYS)

Modified to prevent the return of a truncated string, "Compaq StorageWorks Integrated Smart Array/42xx/43x Controllers SCSI Miniport Dri", description in the I/O control.
Modified so that Windows 2000 Event Log no longer reports an error against the driver during every reboot.

]]> Compaq StorageWorks Fibre Channel Host Controllers SCSI Miniport Driver (CPQFCALM.SYS)

Corrected the issue of a Fibre Channel Manager error message when a hot plugged controller is present.

]]> Compaq Smart Component Installers

Corrected a false summary screen message, "will not attempt to install" in the Smart Component Installer.
Modified the installation to correct a "file missing" error message.

]]> Compaq System Management Driver

Corrected an issue with the Microsoft Windows 2000 Automatic Reboot after a STOP error is received when the System Management drivers are loaded. This setting is located at Control Panel/System/Advanced/Startup and Recovery/ Automatically reboot. Previous versions of the driver would cause the system to hang during the reboot attempt. This issue affects all Compaq servers that are supported by the Compaq Support Paq for Microsoft Windows 2000 product.

]]>

Compaq StorageWorks Fibre Channel Support for Windows 2000

Compaq ProLiant Storage System Driver for Windows 2000

Compaq Smart Array-2 Controllers Driver for Windows 2000

Compaq 32-Bit SCSI Controller Driver for Windows 2000

Compaq Array Notification for Windows 2000

Compaq Drive Array Driver for Windows 2000]]>

Compaq StorageWorks Fibre Channel Support for Windows 2000

Compaq ProLiant Storage System Driver for Windows 2000

Compaq Smart Array-2 Controllers Driver for Windows 2000

Compaq 32-Bit SCSI Controller Driver for Windows 2000

Compaq Array Notification for Windows 2000

Compaq Drive Array Driver for Windows 2000]]>

Compaq StorageWorks Fibre Channel Support for Windows 2000

Compaq ProLiant Storage System Driver for Windows 2000

Compaq Smart Array-2 Controllers Driver for Windows 2000

Compaq 32-Bit SCSI Controller Driver for Windows 2000

Compaq Array Notification for Windows 2000

Compaq Drive Array Driver for Windows 2000]]>

Compaq StorageWorks Fibre Channel Support for Windows 2000

Compaq ProLiant Storage System Driver for Windows 2000

Compaq Smart Array-2 Controllers Driver for Windows 2000

Compaq 32-Bit SCSI Controller Driver for Windows 2000

Compaq Array Notification for Windows 2000

Compaq Drive Array Driver for Windows 2000]]> Issue Resolved Since Support Paq Version 5.00A:

Resolved an issue in which the Smart Component Installers for the Compaq System Management Driver and the Compaq Enhanced Integrated Management Display Service would randomly fail.