cpq_cciss-2.4.50-26.rhel3.i686.rpm Server Server Storage Storage Red Hat Enterprise Linux 3 (x86) Red Hat Advanced Server 2.1 Driver - Storage Controller ドライバ - 記憶装置コントローラ ProLiant Linux driver for Smart Array 6i, 640x, 64x, 5i, 5300 Series controllers for Red Hat Enterprise Linux 3 ProLiant Linux driver for Smart Array 6i, 640x, 64x, 5i, 5300 Series controllers for Red Hat Enterprise Linux 3 ProLiant Linux driver for Smart Array 6i, 640x, 64x, 5i, 5300 Series controllers for Red Hat Enterprise Linux 3 ProLiant Linux driver for Smart Array 6i, 640x, 64x, 5i, 5300 Series controllers for Red Hat Enterprise Linux 3 Hewlett-Packard Company English (US) 英語 IMPORTANT: Additional instructions may be viewed:
    rpm -q -i -p cpq_cciss-[version].rhel3.i686.rpm | more
Please read this section before proceeding. This RPM will install binary drivers that will only work with the default Linux RedHat Enterprise Linux 3.0 kernel, and configuration that it has been built for. Earlier or later versions of RedHat Enterprise Linux 3.0 are not supported. Special actions are required if you have modified the default kernel configuration that RedHat ships for their RedHat Enterprise Linux 3.0 product. If you have modified the default kernel configuration you will need to rebuild the kernel to use the updated drivers after installing the RPM with the --noscripts option. The cciss driver RPM will not install if it detects that your configuration is different from the RedHat Enterprise Linux 3.0 default Server configuration. This driver RPM will not install if the loopback device is not configured but the initrd image is requested since the loopback device is required to create the initrd image. INSTALLATION Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory. To install the driver type:
    # rpm -ivh cpq_cciss-[version].rhel3.i686.rpm
Setup is now complete. Please REBOOT your computer NOW!! To upgrade the driver type:
    # rpm -Uvh cpq_cciss-[version].rhel3.i686.rpm
Upgrade is Now Complete. Please REBOOT your computer NOW!! NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
    # rpm -e cpq_cciss-[version]
The removal of the RPM restores the original cciss.o module, and builds a new initrd image with the previous driver object module (if any) and adds yet another grub or lilo entry. You can then boot using this newest lilo or grub entry, (provided the building of the new initrd image goes well), or your original lilo or grub entry. The successful installation will replace the driver that shipped with RedHat Enterprise Linux 3.0 with the version of the driver, create a new Initial RAM Disk Image (initrd) that contains the cpq_cciss-[version] version of the driver and modify /etc/lilo.conf (or /boot/grub/menu.lst) to allow the Linux Loader, lilo (or grub) to boot using the new ramdisk image. Backups of your previous files will be kept in the /usr/src/COMPAQ/driver_backup directory. The driver version can be verified by typing:
    # strings /lib/modules/'uname -r'/kernel/drivers/block/cciss.o | grep HP
Expect output similar to:
    HP CCISS Driver (v cpq_cciss)
The driver will be inserted in the Initial RAM Disk Image (initrd) and is automatically loaded every time the server boots, provided it is listed in /etc/modules.conf, which, normally, it is. To load the module use the insmod command, type:
    # insmod cciss
Expect the following output if you have Symmetric Multi-Processing support enabled:
    Using /lib/modules/'uname -r'/kernel/drivers/block/cciss.o
Expect the following output if you have a single processor server:
    Using /lib/modules/'uname -r'/kernel/drivers/block/cciss.o
Expect the following output if your server is using the RedHat Enterprise Linux 2.1 kernel:
    Using /lib/modules/'uname -r'/kernel/drivers/addon/cciss/cciss.o
NOTE: You will experience error messages if the Smart Array controller is not installed. Please ensure that the hardware is installed properly. NOTE: If the hardware is properly installed and you experience error messages loading the modules, remove the entire RPM by typing:
    # rpm -e cpq_cciss-[version]
The removal of the RPM will restore the driver modules, and rebuild and initrd image for the running kernel and create appropriate entries in /etc/lilo.conf (or /boot/grub/menu.lst). Additionally you should still be able to boot using the previous entries still in /etc/lilo.conf or /boot/grub/menu.lst, provided the driver modules are restored, or were (and thus still are) in the initrd image. To check whether the driver is loaded properly, type:
    # lsmod
Expect to see the module name cciss displayed. If you attempt to install the RPM on an unsupported system, you will get an error message. The driver will not be operational and must be uninstalled by typing the following command:
    # rpm -e cpq_cciss-[version]
NOTES MD5SUM: 7ab95c3703cfa04f62b4fa48c4dea2f9 FEEDBACK To provide kernel/driver development feedback send email to iss_storagedev@hp.com. CUSTOMER SERVICE For support for ProLiant Smart Array Controllers, please visit Contact HP.]]> IMPORTANT: Additional instructions may be viewed:
    rpm -q -i -p cpq_cciss-[version].rhel3.i686.rpm | more
Please read this section before proceeding. This RPM will install binary drivers that will only work with the default Linux RedHat Enterprise Linux 3.0 kernel, and configuration that it has been built for. Earlier or later versions of RedHat Enterprise Linux 3.0 are not supported. Special actions are required if you have modified the default kernel configuration that RedHat ships for their RedHat Enterprise Linux 3.0 product. If you have modified the default kernel configuration you will need to rebuild the kernel to use the updated drivers after installing the RPM with the --noscripts option. The cciss driver RPM will not install if it detects that your configuration is different from the RedHat Enterprise Linux 3.0 default Server configuration. This driver RPM will not install if the loopback device is not configured but the initrd image is requested since the loopback device is required to create the initrd image. INSTALLATION Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory. To install the driver type:
    # rpm -ivh cpq_cciss-[version].rhel3.i686.rpm
Setup is now complete. Please REBOOT your computer NOW!! To upgrade the driver type:
    # rpm -Uvh cpq_cciss-[version].rhel3.i686.rpm
Upgrade is Now Complete. Please REBOOT your computer NOW!! NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
    # rpm -e cpq_cciss-[version]
The removal of the RPM restores the original cciss.o module, and builds a new initrd image with the previous driver object module (if any) and adds yet another grub or lilo entry. You can then boot using this newest lilo or grub entry, (provided the building of the new initrd image goes well), or your original lilo or grub entry. The successful installation will replace the driver that shipped with RedHat Enterprise Linux 3.0 with the version of the driver, create a new Initial RAM Disk Image (initrd) that contains the cpq_cciss-[version] version of the driver and modify /etc/lilo.conf (or /boot/grub/menu.lst) to allow the Linux Loader, lilo (or grub) to boot using the new ramdisk image. Backups of your previous files will be kept in the /usr/src/COMPAQ/driver_backup directory. The driver version can be verified by typing:
    # strings /lib/modules/'uname -r'/kernel/drivers/block/cciss.o | grep HP
Expect output similar to:
    HP CCISS Driver (v cpq_cciss)
The driver will be inserted in the Initial RAM Disk Image (initrd) and is automatically loaded every time the server boots, provided it is listed in /etc/modules.conf, which, normally, it is. To load the module use the insmod command, type:
    # insmod cciss
Expect the following output if you have Symmetric Multi-Processing support enabled:
    Using /lib/modules/'uname -r'/kernel/drivers/block/cciss.o
Expect the following output if you have a single processor server:
    Using /lib/modules/'uname -r'/kernel/drivers/block/cciss.o
Expect the following output if your server is using the RedHat Enterprise Linux 2.1 kernel:
    Using /lib/modules/'uname -r'/kernel/drivers/addon/cciss/cciss.o
NOTE: You will experience error messages if the Smart Array controller is not installed. Please ensure that the hardware is installed properly. NOTE: If the hardware is properly installed and you experience error messages loading the modules, remove the entire RPM by typing:
    # rpm -e cpq_cciss-[version]
The removal of the RPM will restore the driver modules, and rebuild and initrd image for the running kernel and create appropriate entries in /etc/lilo.conf (or /boot/grub/menu.lst). Additionally you should still be able to boot using the previous entries still in /etc/lilo.conf or /boot/grub/menu.lst, provided the driver modules are restored, or were (and thus still are) in the initrd image. To check whether the driver is loaded properly, type:
    # lsmod
Expect to see the module name cciss displayed. If you attempt to install the RPM on an unsupported system, you will get an error message. The driver will not be operational and must be uninstalled by typing the following command:
    # rpm -e cpq_cciss-[version]
NOTES MD5SUM: 7ab95c3703cfa04f62b4fa48c4dea2f9 FEEDBACK To provide kernel/driver development feedback send email to iss_storagedev@hp.com. CUSTOMER SERVICE For support for ProLiant Smart Array Controllers, please visit Contact HP.]]>
  • cciss binary support for Opteron.
  • Smart Array 6i support.
  • Support for Linux distributions and errata kernels.
  • Support for Modular Smart Array 500 G2.
  • Support for Modular Smart Array 20.
  • Support for One Button Disaster Recovery (OBDR) with Smart Array.
  • Logic to install scripts to warn user when driver versions are the same or newer than the driver to be installed.
  • Kernels supported to the rpm release notes file.
  • Kernels supported to the driver update diskette release note file.
  • Monitor thread support to the rpm drivers.
  • Beta errata for RedHat Enterprise Linux 2.1 U4 and RedHat Enterprise Linux 3 U2.
    • ]]>
  • cciss binary support for Opteron.
  • Smart Array 6i support.
  • Support for Linux distributions and errata kernels.
  • Support for Modular Smart Array 500 G2.
  • Support for Modular Smart Array 20.
  • Support for One Button Disaster Recovery (OBDR) with Smart Array.
  • Logic to install scripts to warn user when driver versions are the same or newer than the driver to be installed.
  • Kernels supported to the rpm release notes file.
  • Kernels supported to the driver update diskette release note file.
  • Monitor thread support to the rpm drivers.
  • Beta errata for RedHat Enterprise Linux 2.1 U4 and RedHat Enterprise Linux 3 U2.
    • ]]>
  • rpm install script to avoid making a new initrd when the new drive is found to be the same as the existing one.
  • bcm5700 6.2.17a fails to load on base SLES7 kernel.
  • CPQ_CISS v.2.4.48-4 causes Boot menu to default to HP-2.4.7-4GB but kernel is actually 2.4.64GB-SMP.
  • Default initrd incorrect should be SMP/enterprise but is set to UP.
  • Issue where drivers where not being installed properly on RHEL3 systems.
  • Uninstall issue with UnitedLinux and RedHat Enterprise Linux 2.1.
  • GRUB naming issue with UnitedLinux.
  • Install script to allow rpm to build an initrd for smp or bigmem kernels even if the hardware is not smp or bigmem.
  • Install issue to allow an initial ram disk to be built for newly installed binary errata kernels in the situation where the hardware is not supported by the driver found in the kernel.
    • Updated the following:
    • Variable type to cover cases when the logical volume size is >1TB.
    • Enabled pre-fetch in the SCSI core for Smart Array for x86 architecture only. Required for firmware >= 1.86.
    • Driver backup directory to /usr/src/HP/driver_backup.
    • The default prefix for the storage rpm to /opt/hp/storage_drivers
    Ported web release changes into 2.4.50. ]]>
  • rpm install script to avoid making a new initrd when the new drive is found to be the same as the existing one.
  • bcm5700 6.2.17a fails to load on base SLES7 kernel.
  • CPQ_CISS v.2.4.48-4 causes Boot menu to default to HP-2.4.7-4GB but kernel is actually 2.4.64GB-SMP.
  • Default initrd incorrect should be SMP/enterprise but is set to UP.
  • Issue where drivers where not being installed properly on RHEL3 systems.
  • Uninstall issue with UnitedLinux and RedHat Enterprise Linux 2.1.
  • GRUB naming issue with UnitedLinux.
  • Install script to allow rpm to build an initrd for smp or bigmem kernels even if the hardware is not smp or bigmem.
  • Install issue to allow an initial ram disk to be built for newly installed binary errata kernels in the situation where the hardware is not supported by the driver found in the kernel.
    • Updated the following:
    • Variable type to cover cases when the logical volume size is >1TB.
    • Enabled pre-fetch in the SCSI core for Smart Array for x86 architecture only. Required for firmware >= 1.86.
    • Driver backup directory to /usr/src/HP/driver_backup.
    • The default prefix for the storage rpm to /opt/hp/storage_drivers
    Ported web release changes into 2.4.50. ]]>
  • Devfs file system.
  • Detecting controller failure. (see notes in detect death patch)
  • Greater than 8 controllers in the system.
    • Updated the following:
    • To ensure that if no pci devices are found, the driver is unregistered.
    • To use __devinit instead of __init.
    • The author and version numbers.
    ]]>
  • Devfs file system.
  • Detecting controller failure. (see notes in detect death patch)
  • Greater than 8 controllers in the system.
    • Updated the following:
    • To ensure that if no pci devices are found, the driver is unregistered.
    • To use __devinit instead of __init.
    • The author and version numbers.
    ]]>
  • Devfs file system.
  • Detecting controller failure. (see notes in detect death patch)
  • Greater than 8 controllers in the system.
    • ]]>
  • To ensure that if no pci devices are found, the driver is unregistered.
  • To use __devinit instead of __init.
  • The author and version numbers.
  • Unified Ciss driver- built from source not patches.
  • New HP naming convention for RPM.
  • Install script will now change the default for the new initrd entry to be the same as the currently running entry.
    • ]]>
    Distribution
    Errata Kernel Version
    Red Hat Linux 7.2, 7.3, 8.02.4.20-20.xRed Hat Enterprise Linux 2.12.4.9-e27SuSE Linux Enterprise 72.4.18-275, 280UnitedLinux 1.02.4.19-333, 340 UnitedLinux 1.0, SP3 - No RPM required NOTE: version 2.4.48 is in the SP3 kernel. Red Hat Enterprise Linux 3 NOTE: rpm created for base kernel]]>
  • Devfs ファイル システム
  • コントローラ障害の検出 (detect death patchを参照)
  • システム内に8台以上のコントローラ
    • ]]>
  • PCIデバイスが見つからない場合、ドライバが登録されないようになりました。
  • __initの代わりに__devinitを利用
  • 所有者およびバージョン番号
  • Unified Cissドライバはパッチではなく、ソースからビルドされました。
  • RPMは新しいHPの命名規則になりました。
  • インストール スクリプトは、新しいinitrdエントリが実行中のエントリと同じになるようにデフォルト設定が変更されました。
    • ]]>
    ディストリビューション
    Errata カーネル バージョン
    Red Hat Linux 7.2 7.3 8.0 Professional" Red Hat Enterprise Linux 2.1 SuSE Linux Enterprise Server 7(SLES-7) "Conective Linux Enterprise Edition, SCO Linux 4.0, SuSE Linux Enterprise 8, および Turbolinux 8 - UnitedLinux 1.0による2.4.20-20.xRed Hat Enterprise Linux 2.12.4.9-e27SuSE Linux Enterprise 72.4.18-275, 280UnitedLinux 1.02.4.19-333, 340 UnitedLinux 1.0, SP3 - RPMは必要なし 注意: バージョン 2.4.48 は、SP3 カーネルにあります。 Red Hat Enterprise Linux 3 注意: rpm がベース カーネルのために作成されています。]]>     0E11 B060 0E11 4070 0E11 B178 0E11 4083 0E11 B178 0E11 4082 0E11 B178 0E11 4080 0E11 0046 0E11 409C 0E11 0046 0E11 409D 0E11 0046 0E11 409A 0E11 0046 0E11 409B 0E11 0046 0E11 4091 rpm -ivh cpq_cciss-2.4.50-26.rhel3.i686.rpm hppldu-1.0.4-2.tar.gz HP ProLiant Linux Deployment Utility install711.sh HP ProLiant Linux Deployment Utility installation shell script cpq_cciss-2.4.50-26.rhel3.i686.txt ProLiant Linux driver for Smart Array 6i, 640x, 64x, 5i, 5300 Series controllers for Red Hat Enterprise Linux 3 text file