hpasm-7.3.0-58.rhel4.i386.rpm Server Server Red Hat Enterprise Linux 4 (x86) Software - System Management ソフトウェア - システム管理 HP System Health Application and Insight Management Agents for Red Hat Enterprise Linux 4 (x86) HPシステム ヘルス アプリケーションおよびInsightマネジメントエージェント for Red Hat Enterprise Linux 4（x86） HP System Health Application and Insight Management Agents for Red Hat Enterprise Linux 4 (x86) HPシステム ヘルス アプリケーションおよびInsightマネジメントエージェント for Red Hat Enterprise Linux 4（x86） Hewlett-Packard Company English (US) 英語 Installation Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

If a previous version of the Health Driver or Insight Management agents has been installed, they must be removed before this package can be installed. Any packages dependent on the Health Driver must also be removed. To check which version of the Health Driver (if any) is on the system, type:

    rpm –q hpasm
The rpm -q command may also be used to check for the existence of dependent packages. There is no need to uninstall packages that are not present on the system.

To remove the previous version and any packages dependent on it, type the following, in order:

  • rpm –e cmanic
  • rpm –e hprsm
  • rpm –e hpasm
NOTE: You should install the net-snmp agents from your OS prior to installing the hpasm package.

To install the package, type:

    rpm -ivh hpasm-< version >.rpm
The application and agents will be installed immediately. The NIC Agents must be downloaded and installed separately.

To check whether the package is loaded properly, type:

    /etc/init.d/hpasm status
You should see entries for the following:
    hpasmd – Health Application Status of Foundation Agents (cmafdtn): cmawebd cmathreshd cmahostd cmapeerd cmathreshd cmahostd cmapeerd Status of Server Agents (cmasvr): cmastdeqd cmahealthd cmaperfd cmastdeqd cmahealthd cmaperfd Status of Storage Agents (cmastor): cmaeventd cmaidad cmafcad cmaided cmascsid cmaeventd cmaidad cmafcad cmaided cmascsid (if server has a SCSI controller supported by agents)
If you attempt to install the RPM on an unsupported system, you will get an error message. The driver will not be operational and it is advisable to uninstall the driver at your earliest convenience.

Running the health driver: Once installed, the health driver will be automatically loaded every time the server boots. Several /proc entries are available when the driver is running.

Additional information and help is available by typing:

    man hpasm
Running the agents: The agents require an SNMP stack to be available. If SNMP support is not installed on the system, the agents will not load. For Red Hat Linux Enterprise Server 3.0, the HP provided SNMP stack is required for the management agents to be enabled. This component is available here: http://www.compaq.com/support/files/server/us/download/21104.html. If the agents are not loaded, the health driver will still function normally.

Running the IML Viewer Application The HP ProLiant Integrated Management Log (IML) Viewer is an application that runs in the X-Windows environment. Execute the following command to start the IML Viewer:

    cpqimlview
The HP ProLiant Integrated Management Log Viewer automatically displays the current entries of the Integrated Management Log.

Additional information and help is available by typing:

    man cpqimlview
Previous versions of the health driver and agents Previous versions of the health driver and agents are available on ftp.compaq.com. To ensure the latest technology and bug fixes, HP recommends the use of this package over previous versions of the driver and agents.

MD5 CHECKSUM:

90dcd4c33a2ff40f912da8aa8ae7d20hpasm-< version >.rhel4.i386.rpm

Additional information about features, installation, use, and troubleshooting the HP Server Management Drivers and Agents is available in the HOWTO documents available here: http://www.compaq.com/products/servers/linux/documentation.html.]]> Installation Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

If a previous version of the Health Driver or Insight Management agents has been installed, they must be removed before this package can be installed. Any packages dependent on the Health Driver must also be removed. To check which version of the Health Driver (if any) is on the system, type:

    rpm 牧 hpasm
The rpm -q command may also be used to check for the existence of dependent packages. There is no need to uninstall packages that are not present on the system.

To remove the previous version and any packages dependent on it, type the following, in order:

  • rpm 貌 cmanic
  • rpm 貌 hprsm
  • rpm 貌 hpasm
NOTE: You should install the net-snmp agents from your OS prior to installing the hpasm package.

To install the package, type:

    rpm -ivh hpasm-< version >.rpm
The application and agents will be installed immediately. The NIC Agents must be downloaded and installed separately.

To check whether the package is loaded properly, type:

    /etc/init.d/hpasm status
You should see entries for the following:
    hpasmd �Health Application Status of Foundation Agents (cmafdtn): cmawebd cmathreshd cmahostd cmapeerd cmathreshd cmahostd cmapeerd Status of Server Agents (cmasvr): cmastdeqd cmahealthd cmaperfd cmastdeqd cmahealthd cmaperfd Status of Storage Agents (cmastor): cmaeventd cmaidad cmafcad cmaided cmascsid cmaeventd cmaidad cmafcad cmaided cmascsid (if server has a SCSI controller supported by agents)
If you attempt to install the RPM on an unsupported system, you will get an error message. The driver will not be operational and it is advisable to uninstall the driver at your earliest convenience.

Running the health driver: Once installed, the health driver will be automatically loaded every time the server boots. Several /proc entries are available when the driver is running.

Additional information and help is available by typing:

    man hpasm
Running the agents: The agents require an SNMP stack to be available. If SNMP support is not installed on the system, the agents will not load. For Red Hat Linux Enterprise Server 3.0, the HP provided SNMP stack is required for the management agents to be enabled. This component is available here: http://www.compaq.com/support/files/server/us/download/21104.html. If the agents are not loaded, the health driver will still function normally.

Running the IML Viewer Application The HP ProLiant Integrated Management Log (IML) Viewer is an application that runs in the X-Windows environment. Execute the following command to start the IML Viewer:

    cpqimlview
The HP ProLiant Integrated Management Log Viewer automatically displays the current entries of the Integrated Management Log.

Additional information and help is available by typing:

    man cpqimlview
Previous versions of the health driver and agents Previous versions of the health driver and agents are available on ftp.compaq.com. To ensure the latest technology and bug fixes, HP recommends the use of this package over previous versions of the driver and agents.

MD5 CHECKSUM:

90dcd4c33a2ff40f912da8aa8ae7d20hpasm-< version >.rhel4.i386.rpm

Additional information about features, installation, use, and troubleshooting the HP Server Management Drivers and Agents is available in the HOWTO documents available here: http://www.compaq.com/products/servers/linux/documentation.html.]]>

  • Advanced Server Management application (Health Driver)
  • Integrated Management Log (IML) Viewer Application
  • Foundation Agents
  • Health agent (formerly in the Server Agents package)
  • Standard equipment agent (formerly in the Server Agents package)
  • Server peer agent (formerly in the Server Agents package)
  • Storage agentsThe Advanced Server Management (health) driver can be recompiled on a non-default (or errata) Linux Kernel. If you would like to install or create the RPM for a non-default kernel, you must also install the kernel sources for your compiled kernel. In addition, the development packages required for rebuilding a kernel need to be present.]]>
  • アドバンスト サーバ マネジメント アプリケーション（ヘルス ドライバ）
  • インテグレーテッド マネジメント ログ（IML）ビューア アプリケーション
  • 基本エージェント
  • ヘルス エージェント（以前はサーバ エージェント パッケージに含まれていました）
  • 標準装置エージェント（以前はサーバ エージェント パッケージに含まれていました）
  • サーバ ピア エージェント（以前はサーバ エージェント パッケージに含まれていました）
  • ストレージ エージェントアドバンスト サーバ マネジメント（ヘルス）ドライバは、デフォルト以外の（またはerrata）Linuxカーネルでもコンパイルすることができます。 デフォルトでないカーネルにインストールまたはRPMを作成する場合、コンパイルされたカーネルのカーネル ソースをインストールする必要があります。 さらに、カーネルを再構築するための開発パッケージが必要です。]]> Included support for Red Hat Enterprise Linux 4 (original support released with hpasm version 7.2.1).

    Added support for HP Smart Array P600 controller.]]> Red Hat Enterprise Linux 4（最初のサポート リリースは、hpasmバージョン7.2.1）のサポートが含まれています。

    HP SmartアレイP600コントローラのサポートを追加しました。]]> Resolved an issue where the DIMM information was incorrectly displayed on the System Management Homepage.]]> システム マネジメント ホームページでDIMM情報が正しく表示されない問題を修正しました。]]> rpm -Uvh hpasm-7.3.0-58.rhel4.i386.rpm hppldu-1.0.7-7.tar.gz HP ProLiant Linux Deployment Utility install730.sh HP ProLiant Linux Deployment Utility installation shell script hppldu-librpms-1.0.7-7.tar.gz HP ProLiant Linux Deployment Utility Support Library RPMs