TITLE: ProLiant Full MIB update kit for HP Systems Insight Manager for Windows, Linux, and HP-UX
VERSION: 7.90
FILENAME: upd790mib.zip (Windows); upd790mib.tar (Linux, HP-UX)

NOTE: This is a full Mib Update Kit and updating this on any version of SIM will update it to the latest 7.9 mibs
      If this Mib Update Kit is applied to any version of HP Systems Insight Manager, no warn will be done.

_____________________________________

The following MIBs are included in this Kit:

	adaptec.mib
	asmib.mib
	atmf.mib
	avsnmpv1.mib
	bkupexec.mib
	bladetype2-acl.mib
	bladetype2-network.mib
	bladetype2-physical.mib
	bladetype2-qos.mib
	bladetype2-switch.mib
	bladetype2-trap.mib
	bladetype4-network.mib
	bladetype4-physical.mib
	bladetype4-switch.mib
	bladetype4-trap.mib
	bridge.mib
	brocade-reg-mib.mib
	brocade-tc.mib
	cageagt.mib
	cisco-cdp.mib
	cisco-cluster.mib
	cisco-config-copy.mib
	cisco-config-man.mib
	cisco-entity-fru-control.mib
	cisco-entity-vendortype-oid.mib
	cisco-envmon.mib
	cisco-flash.mib
	cisco-ftp-client.mib
	cisco-igmp-filter.mib
	cisco-image.mib
	cisco-ip-stat.mib
	cisco-l2l3-interface-config.mib
	cisco-lag.mib
	cisco-mac-notification.mib
	cisco-memory-pool.mib
	cisco-nac-nad.mib
	cisco-pae.mib
	cisco-pagp.mib
	cisco-ping.mib
	cisco-port-security-mib.mib
	cisco-process.mib
	cisco-products.mib
	cisco-qos-pib.mib
	cisco-rttmon.mib
	cisco-smi.mib
	cisco-stack-mib.mib
	cisco-stackmaker.mib
	cisco-stp-extensions.mib
	cisco-syslog.mib
	cisco-tc.mib
	cisco-tcp.mib
	cisco-udldp.mib
	cisco-vlan-iftable-relationship.mib
	cisco-vlan-membership.mib
	cisco-vtp.mib
	compaq-agent.mib
	compaq-id-rec.mib
	cpq-traps.mib
	cpq54nn.mib
	cpqapli.mib
	cpqappg80.mib
	cpqclus.mib
	cpqcmc.mib
	cpqcr.mib
	cpqdmii.mib
	cpqdsccs.mib
	cpqfca.mib
	cpqfix.mib
	cpqgen.mib
	cpqhlth.mib
	cpqhost.mib
	cpqhostb.mib
	cpqhsv110v3.mib
	cpqica.mib
	cpqida.mib
	cpqide.mib
	cpqidrec.mib
	cpqinfo.mib
	cpql2mgt.mib
	cpqlinos.mib
	cpqn5226a.mib
	cpqnic.mib
	cpqnunif.mib
	cpqpower.mib
	cpqrack.mib
	cpqrecov.mib
	cpqrpm.mib
	cpqsanapp.mib
	cpqsanevent.mib
	cpqscsi.mib
	cpqservice.mib
	cpqsinfo.mib
	cpqsm2.mib
	cpqsrvmn.mib
	cpqstat.mib
	cpqstdeq.mib
	cpqstsys.mib
	cpqswcc.mib
	cpqthrsh.mib
	cpqups.mib
	cpqwcrm.mib
	cpqwinos.mib
	dataprotector.mib
	dell10892.mib
	dellarymgr.mib
	dlghwinf.mib
	dmtfdmi.mib
	ems.mib
	emsmibax.mib
	entity-mib.mib
	ether.mib
	etherlike.mib
	fa-mib40.mib
	fddi-smt73-mib.mib
	fe-mib.mib
	fpipes.mib
	GbE2c-1-10G-L2L3.mib
	GbE2c-10G-L2L3.mib
	h22agent.mib
	host-resources-mib.mib
	hp-mccluster.mib
	hp-switch-pl.mib
	hpeccmib.mib
	hpipf02trap.mib
	hpipftrap.mib
	hpn.mib
	hpnetctz.mib
	hpnr.mib
	hpov-nnm.mib
	hpovsam.mib
	hpovsam_im.mib
	hpprfmib.mib
	hpsgcluster.mib
	hpswa.mib
	hptat.mib
	hptrap.mib
	hs_agent.mib
	hubnvle.mib
	ianaiftype-mib.mib
	ibmmmalert.mib
	ibmserveraid.mib
	ibmums.mib
	ibmumsevent.mib
	ieee8021-pae.mib
	ieee8023-lag.mib
	if-mib.mib
	igmp-mib.mib
	inet-address.mib
	lsf001.mib
	mlxraid.mib
	ndstrap.mib
	nsaasr.mib
	nsadimm.mib
	nsaevent.mib
	nsainfo.mib
	nsapci.mib
	nsarps.mib
	nsascsi.mib
	nsatrcfg.mib
	nsatrmgr.mib
	nsavolcp.mib
	nsnicmib.mib
	nwalarm.mib
	nwserver.mib
	old-cisco-chassis.mib
	old-cisco-flash.mib
	old-cisco-interfaces.mib
	old-cisco-ip.mib
	old-cisco-sys.mib
	old-cisco-tcp.mib
	old-cisco-ts.mib
	ovis-v2.mib
	p-bridge-mib.mib
	parselog.mib
	pcisnet.mib
	pfc.mib
	powernet.mib
	q-bridge.mib
	qlogicmib2.mib
	radlan-mib.mib
	rfc-1212.mib
	rfc-1213.mib
	rfc-1215.mib
	rfc1155-smi.mib
	rfc1155.mib
	rfc1158.mib
	rfc1212.mib
	rfc1213.mib
	rfc1215.mib
	rfc1271-mib.mib
	rfc1514.mib
	rmon-mib.mib
	rmon2-mib.mib
	smsagent.mib
	snmp-framework-mib.mib
	snmp-mpd-mib.mib
	snmp-notification-mib.mib
	snmp-target-mib.mib
	SNMPv2-CONF.mib
	snmpv2-mib.mib
	SNMPv2-SMI-v1.mib
	SNMPv2-SMI.mib
	snmpv2-tc-v1.mib
	SNMPv2-TC.mib
	svrclu.mib
	svrmgt.mib
	svrntc.mib
	switch.mib
	symtrap.mib
	tcp-mib.mib
	token-ring-rmon-mib.mib
	token.mib
	truclu.mib
	ucd-snmp-mib.mib
	udp-mib.mib
	ums.mib
	unified.mib
	v5_0ficon.mib
	v5_1ha.mib
	v5_3sw.mib
	wbt3mib.mib
	xp1024trapmib.mib
	zesa.mib
	zhrm.mib
	zsmp.mib
	ztmx.mib
	ztsa.mib

The following new MIBs have been added in 7.9 release

	GbE2c-1-10G-L2L3.mib
	cpqdsccs.mib
	GbE2c-10G-L2L3.mib

The following MIBs have been changed from 7.8 release

	cpqhost.mib
	cpqrack.mib
	cpqscsi.mib
	cpqida.mib
	cpqhlth.mib
	cpqsinfo.mib
	cpqstdeq.mib
	CPQNIC.mib

	cpqhost.mib - Mib Rev of 1.28
  		- Added additional fields "cpqHoSWRunningStatus", "cpqHoSWRunningConfigStatus", 
    		"cpqHoSWRunningIdentifier", "cpqHoSWRunningRedundancyMode" to the "cqpHoSWRunningEntry", 
    		and trap "cpqHoSWRunningStatusChangeTrap".

	cpqscsi.mib - Mib Rev of 1.37
  		- Added sasSc40Ge(6) to cpqSasHbaModel list of enumerations.
  		- Added offline(6) to cpqSasLogDrvStatus.

	cpqida.mib - Mib Rev of 1.36
  		- Added cpqDaCntlrDriveWriteCacheState to the controller table.
  		- Added support for Smart Array P700m.

	cpqhlth.mib - Mib Rev of 1.24
   		- Added:cpqHePowerMeter Group
       			- cpqHePowerMeterSupport
       			- cpqHePowerMeterStatus
       			- cpqHePowerMeterCurrReading
       			- cpqHePowerMeterPrevReading 
       		- Enumeration changes for cpqHePowerMeterSupport       
       		- Typo issues fixed & descriptions changed for few OIDs in cpqHePowerMeter
       		- Few enumeration values changed to lower case
       		- Updated cpqHeFltTolFanLocale for new enumerations.

	cpqsinfo.mib - Mib Rev of 1.29
		- cpqSiRackEnclosureMgrFwRev, cpqSiRackEnclosureMgrProductID, cpqSiRackEnclosureMgrUUID OIDs - added
		- updated the description for cpqSiRackEnclosureMgrSerialNumber
		- cpqSiMibRevMajor of one (1) and a cpqSiMibRevMinor of twenty-nine (29)

	cpqrack.mib - MIB Rev of 1.7 changes to SERVERITY and STATE for TRAPS
		- cpqRackServerBladeRemoved,cpqRackServerBladeInserted
		- cpqRackServerBladeRemoved2,cpqRackServerBladeInserted2

	cpqstdeq.mib - MIB Rev of 1.24
		- cpqSeMibRevMajor of one (1) and a cpqSeMibRevMinor of twenty-four (24).
		- cpqSeIOCPowerState - changed to enumeration type

	CPQNIC.mib - MIB Rev of 1.43
		- Added gigEthernetHalf and gig10EthernetFull for kmdf driver and 10gb nics

_____________________________________
INSTALL INFORMATION 

This document will guide the user through getting the latest mib and cfg files copied and installed on their management server.

Two procedures exist: one to install the MIB update on Windows platforms and the other to install the MIB update on HP-UX or Linux platforms.

The Windows update will automatically determine if HP Systems Insight Manager is running and then perform the appropriate steps else an error will be summed.

The procedure for HP-UX and Linux is the same for both Operating Systems and only runs if Systems Insight Manager (any version) is installed.

NOTE: The user must log in with administrator privileges on Windows and as root on HP-UX/Linux. In addition, when updating the MIBs for Systems Insight Manager, the log in account must also be a full-rights Systems Insight Manager user in order to execute tools such as MxMib.

NOTE: This kit contains modifications to event types which if used in a query could cause the query to not trigger as the query mechanism uses a perfect match scheme.

_____________________________________
INSTALL PROCEDURE(s)

To Update MIBs on a Windows Platform:

1)  Log in to Windows as a user with administrative rights
2)  Create a temp directory, such as c:\mgmtcd
3)  Launch your browser with this URL: http://www.hp.com/go/hpsim and navigate to the mibs download.
    Select Download->HP SIM - Windows->Insight Management MIB update kit for HP SIM.
4)  Download and save the zip file, upd790mib.zip, to the newly created directory, c:\mgmtcd
5)  Open My Computer and navigate to c:\mgmtcd.
6)  Using a Win-zip compatible program, unzip the contents of the zip file by double clicking on it 
    and then extract the contents to c:\mgmtcd.
7)  Start a command console by clicking on Start->Run and entering cmd in the dialog box that appears and then click OK.
8)  In the Command Console, navigate to c:\mgmtcd ( cd c:\mgmtcd )
7)  In c:\mgmtcd, execute the following command exactly:
    cscript updatemibs.js
8)  The script will run and display messages on the command console.
9)  When the script completes, you may delete the temp directory c:\mgmtcd and all its contents


To Update MIBs on an HP-UX/Linux Platform:

1)  Log in to HP-UX/Linux as root
2)  Create a directory such as /root/mgmtcd ( mkdir mgmtcd), It does not have to exist off of the root but for the purposes of this document it does)
3)  Launch your browser with this URL:  http://www.hp.com/go/hpsim and navigate to the mibs download.
    Select Download->HP SIM - (HP-UX or Linux)->Proliant MIB update kit for HP SIM.
4)  Download and save the tar file, upd790mib.tar to the newly created directory, /root/mgmtcd
5)  Start a terminal and navigate to the new directory ( cd /root/mgmtcd )
6)  Extract the contents of upd790mib.tar by entering the following command:
    tar -xvf upd790mib.tar
7)  Execute the following:
    chmod +x updatemibs
8)  Execute the following:
    ./updatemibs
9)  The script will run and display messages on the terminal.
10)  When the script completes, you may remove the directory /root/mgmtcd and all its contents


Copyright 2004, 2005, 2006, 2007 Hewlett-Packard Development Company, L.P.  All rights reserved.

