[CVA File Information]
CVA Version=2.0
CVASyntaxVersion=1.0L

[Software Title]
US=ESS M2E WDM Audio Driver (WinME).

[US.Software Description]
ESS Technology is providing updated Windows Windows Millennium® drivers for the M2E (ES1978), ES1920/ES1921 and ES978 products in this release. 

[General]
Version=5.12
Revision=A
Pass=3
Installation=Installable,SilentInstall
Division=Commercial Portables
DistributionMethod=Pre Install,Restore CD,Support Software CD,Internet
Type=Driver
Category=Audio
UserMustBeLoggedIn=0
InstallsSystemComponents=0

[DetailFileInformation]
maestro.sys=<WINSYSDIR>,0x0005,0x000C,0x0001,0x0800

[SupportedLanguages]
Languages=[US]


[Softpaq]
SoftpaqNumber=[SP15079]
SoftpaqEffectiveDate=09/19/2000
SoftpaqUtilityVersion=4.0
SupersededSoftpaqNumber=[]
PackageExtraction=

[Operating Systems]
WinME=OEM

[System Information]
SysID1=0x0508
SysName1=Armada E700,
SysID2=0x0538
SysName2=Armada M700,
SysID3=0x053C
SysName3=Armada M300,
SysID4=0x05BC
SysName4=Armada E500,
SysID5=0x05F2
SysName5=Armada V300,

[Software Dependencies]
PN=
SP=

[US.Enhancements]
N/A

[US.Solutions]

[US.Notes]


[End-User Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Silent Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP -s
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Blind Installation Instructions]


[Uninstallation Instructions]


[Install Execution]
Install="setup.exe"
SilentInstall="setup.exe" -s -SMS
BlindInstall=
Uninstall=
InstallRecover=

[MSBATCH Installation Instructions]


[NTDS Installation Instructions]