[CVA File Information]
CVA Version=2.0
CVASyntaxVersion=1.0L

[Software Title]
GK=Armada Rage LT PRo and Mobility P Driver for Windows 2000.

[GK.Software Description]
This is the Windows 2000 video driver for Rage LT Pro and Mobility P
graphics chips in the Armada Series and models listed above.  It 
enables the features and functions of these 
graphics chips. 

[General]
Version=2.00
Revision=A
Pass=6
Installation=Installable,SilentInstall
UserMustBeLoggedIn=

[DetailFileInformation]
ATI2DRAB.DRV=<WINSYSDIR>,0x0005,0x0000,0x0893,0x0FCA,0x0000 

[SupportedLanguages]
Languages=GK


[Softpaq]
SoftpaqNumber=SP15122
SoftpaqEffectiveDate=12/20/2000
SoftpaqUtilityVersion=4.0
SupersededSoftpaqNumber=SP14149
PackageExtraction=

[Operating Systems]
WIN2K=OEM

[System Information]
SysID1=0x0508
SysName1=Armada E700,
SysID2=0x0538
SysName2=Armada M700,
SysID3=0x053C
SysName3=Armada M300,
SysID4=0x05BC
SysName4=Armada E500,
SysID5=0x05F2
SysName5=Armada V300,

[Devices]
VEN_1002&DEV_4C4D=RAGE MOBILITY-P AGP
VEN_1002&DEV_4C49=RAGE LT PRO PCI

[Software Dependencies]
PN=
SP=

[GK.Enhancements]
- OpenGL support
- Resolves known issues including:
	- blue screen after installing video driver on system with
	  the latest Compaq HotKey and Power Management Utilities
	- mouse pointer disappear intermittently in 256-color mode
	- lauching MPEG file could cause blue screen
	- resolution is not correct after the 1st boot or 2nd
	  reboot
	- system locks up when switching from SXGA+ Panel to CRT to TV
	  while playing video clip
	- incorrect panel resolution when using SXGA+ Panel with the 
	  panel on Secondary and CRT on Primary CRTC
	- DPMS is not properly set
	- uninstall message is not translated correctly for Japanese driver
	- panel backlight stays on during suspend while system is docked
	- intermittent video corruption after resume from suspend

[GK.Solutions]

[GK.Notes]
DirectX 7.0 or later required.

[End-User Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Silent Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP /k
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Blind Installation Instructions]


[Uninstallation Instructions]


[Install Execution]
Install="setup.exe"
SilentInstall="setup.exe" /k -SMS
BlindInstall=
Uninstall=
InstallRecover=

[MSBATCH Installation Instructions]


[NTDS Installation Instructions]