[CVA File Information]
CVA Version=2
CVASyntaxVersion=1.5C1

[Software Title]
US= Remote ROM Flash (686H ROM) for Armada M700 Series 

[US.Software Description]
This software creates .CAB files that contain a binary image for the System ROM for Armada M700 Series. The BIOS/ROM image file must be used with Remote Management Software in order to actually flash (upgrade) the ROM image on one of the affected Armada notebooks. The ROM Family and ROM date can be determined by running F10 Setup.

[General]
DeliverableID=
PN=
Version=00/08/03
Revision=a
Pass=
Division=Commercial Portables
DistributionMethod=Internet,Support Software CD
Type=ROMPAQ
Category=ROMPaqs and System Software
Installation=
UserMustBeLoggedIn=
InstallsSystemComponents=

[DetailFileInformation]
686H.cab=ROM,686H,08,03,20,00

[SupportedLanguages]
Languages=GLOBAL

[Softpaq]
SoftpaqNumber=SP15622
SoftpaqEffectiveDate=September 27, 2000
SoftpaqUtilityVersion=5.0
SupersededSoftpaqNumber=SP15424
PackageExtraction=

[Operating Systems]

[System Information]
SysID1=0x0538
SysName1="Armada M700 Series"

[Devices]

[Software Dependencies]
PN=
SP=

[US.Enhancements]
- Memory buffer modifications were made to support Samsung 256MB memory modules.
- A problem under stick function enabled where the number keypad character will repeat
  was resolved.
- A 600 MHz CPU was reported as 1000 MHz in F10 setup. This was resolved.
- The system would intermittently hang during an AC/DC change resume from standby. 
- A video BIOS update with unspecified changes was incorporated into the ROM.
- Enhancements for the LG 13.3 panel were added.

[US.Solutions]

[US.Notes]


[End-User Installation Instructions]
1. Download the SoftPaq to a temporary, empty directory on your hard drive. 
The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 

2. The BIOS/ROM image file must be used with Remote Management Software in order to actually flash (upgrade) the ROM image on one of the affected Armada notebooks.

3. When used with SSM, copy the SoftPaq to the file store.

4. When used with WINFLASH, run the SoftPaq to get the .cab file. 


[Silent Installation Instructions]


[Blind Installation Instructions]


[Uninstallation Instructions]


[Install Execution]
Install=
SilentInstall=
BlindInstall=
Uninstall=
InstallRecover=

[MSBATCH Installation Instructions]


[NTDS Installation Instructions]