[CVA File Information] CVA Version=2 CVASyntaxVersion=1.5C1 [Software Title] US= Remote ROM Flash (686N ROM) for Armada E500/V300 Series [US.Software Description] This software creates .CAB files that contain a binary image for the System ROM for Armada E500/V300 Series. The BIOS/ROM image file must be used with Remote Management Software in order to actually flash (upgrade) the ROM image on one of the affected Armada notebooks. The ROM Family and ROM date can be determined by running F10 Setup. [General] DeliverableID= PN= Version=00/08/26 Revision=a Pass= Division=Commercial Portables DistributionMethod=Internet,Support Software CD Type=ROMPAQ Category=ROMPaqs and System Software Installation= UserMustBeLoggedIn= InstallsSystemComponents= [DetailFileInformation] 686N.cab=ROM,686N,08,26,20,00 [SupportedLanguages] Languages=GLOBAL [Softpaq] SoftpaqNumber=SP15623 SoftpaqEffectiveDate=September 27, 2000 SoftpaqUtilityVersion=5.0 SupersededSoftpaqNumber= PackageExtraction= [Operating Systems] [System Information] SysID1=0x05BC SysName1="Armada E500 Series" SysID2=0x0610 SysName2="Armada V300 Series" [Devices] [Software Dependencies] PN= SP= [US.Enhancements] - Change memory buffer strength registers to fix 128 MB DIMM problem. [US.Solutions] [US.Notes] [End-User Installation Instructions] 1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. The BIOS/ROM image file must be used with Remote Management Software in order to actually flash (upgrade) the ROM image on one of the affected Armada notebooks. 3. When used with SSM, copy the SoftPaq to the file store. 4. When used with WINFLASH, run the SoftPaq to get the .cab file. [Silent Installation Instructions] [Blind Installation Instructions] [Uninstallation Instructions] [Install Execution] Install= SilentInstall= BlindInstall= Uninstall= InstallRecover= [MSBATCH Installation Instructions] [NTDS Installation Instructions]