[CVA File Information]
CVA Version=2.0
CVASyntaxVersion=1.0L

[Software Title]
US=Synaptics Touchpad for Windows 2000 

[US.Software Description]
Unpacks files needed to install the Synaptics touchpad in the Armada computers listed below.

[General]
Version=5.45
Revision=A
Pass=2
Installation=Installable,SilentInstall
Division=Commercial Portables
DistributionMethod=Pre Install,Restore CD,Support Software CD,Internet
Type=Driver
Category=Input Device
UserMustBeLoggedIn=0
InstallsSystemComponents=0

[DetailFileInformation]


[SupportedLanguages]
Languages=[US]


[Softpaq]
SoftpaqNumber=[SP16795]
SoftpaqEffectiveDate=01/23/2001
SoftpaqUtilityVersion=4.0
SupersededSoftpaqNumber=[]
PackageExtraction=

[Operating Systems]
Win2K


[System Information]
SysID1=0x0508
SysName1=Armada E700,
SysID2=0x0538
SysName2=Armada M700,
SysID3=0x053C
SysName3=Armada M300,
SysID4=0x05BC
SysName4=Armada E500,
SysID5=0x05F2
SysName5=Armada V300,

[Software Dependencies]
PN=
SP=

[US.Enhancements]
N/A

[US.Solutions]

[US.Notes]
1. Attempting to create a Microsoft Emergency Repair disk after installing the Synaptics TouchPad driver v5.0.45 on units running Win2000 will produce the following error message(s) 
   if "Run Emergency Repair Disk utility" is not checked prior to installation:
   "Cannot execute the Emergency Repair Disk utility." or,"It is strongly recommended that you manually create an Emergency Repair Disk before Clicking 'OK' to continue."

2. While uninstalling the Synaptics Tohchpad driver v5.0.45, the following message may appear on the screen:"InstNT.exe has generated errors and will be closed by Windows. 
   You need to restart the program." This is a false warning: the driver will still be uninstalled successfully.

3. The Synaptics Touchpad driver v5.0.45 does not contain a SETUP.ISS (silent-install scripts) to support Install Shield's silent install feature.

4. Ejecting a docked PC with a scrolling PS/2 mouse attached to the docking station may cause the Touchpad to perform erratically. The Touchpad may also perform erratically 
   if a scrolling PS/2 mouse, which was connected to the unit when the unit was placed into Suspend mode, is disconnected from the unit before it is brought out of Suspend mode.


[End-User Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Silent Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP -s
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Blind Installation Instructions]


[Uninstallation Instructions]


[Install Execution]
Install="setup.exe"
SilentInstall="setup.exe" -s -SMS
BlindInstall=
Uninstall=
InstallRecover=

[MSBATCH Installation Instructions]


[NTDS Installation Instructions]