[CVA File Information]
CVA Version=3
CVASyntaxVersion=1.0L

[Software Title]
US=ESS Allegro Windows NT 4.0 Audio Driver.

[US.Software Description]
This is the Windows NT 4.0 driver that enables the audio features and functions of the Armada Series models listed below.

[General]
Version=4.03
Revision=B
Pass=1
Installation=Installable,SilentInstall
Division=Commercial Portables
DistributionMethod=Pre Install,Restore CD,Support Software CD,Internet
Type=Driver
Category=Audio
UserMustBeLoggedIn=0
InstallsSystemComponents=0

[DetailFileInformation]
ALLEM3.SYS=<WINSYSDIR>\Drivers,0x0004,0x0003,0x0000,0x0BFE

[SupportedLanguages]
Languages=US


[Softpaq]
SoftpaqNumber=SP17136
SoftpaqEffectiveDate=3/23/2001
SoftpaqUtilityVersion=4.0
SupersededSoftpaqNumber=SP15863
PackageExtraction=

[Operating Systems]
NT40=OEM

[System Information]
SysID1=0x06F4
SysName1=Evo N400 C,

[Devices]
VEN_125D&DEV_1988=ESS Audio

[Software Dependencies]
PN=
SP=

[US.Enhancements]
N/A

[US.Solutions]

[US.Notes]


[End-User Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Silent Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP -s
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Blind Installation Instructions]


[Uninstallation Instructions]


[Install Execution]
Install="setup.exe"
SilentInstall="setup.exe" -s -SMS
BlindInstall=
Uninstall=
InstallRecover=

[MSBATCH Installation Instructions]


[NTDS Installation Instructions]