[CVA File Information]
CVA Version=2.0
CVASyntaxVersion=1.0L

[Software Title]
GR=Evo Rage Mobility Video Driver for Windows NT 4.0

[GR.Software Description]
This is the Windows NT video driver for Rage LT 
Pro and Mobility graphics chips in the Evo Series models 
listed above.  It enables the features and functions of these 
graphics chips.

[General]
Version=5.00
Revision=A
Pass=1
Installation=Installable,SilentInstall
UserMustBeLoggedIn=

[DetailFileInformation]
ATI2DRAB.DRV=<WINSYSDIR>,0x0004,0x0000,0x0565,0x0BF1

[SupportedLanguages]
Languages=GR

[Softpaq]
SoftpaqNumber=SP17596
SoftpaqEffectiveDate=09/14/2001
SoftpaqUtilityVersion=5.1
SupersededSoftpaqNumber=SP16172
PackageExtraction=

[Operating Systems]
WINNT=OEM

[System Information]
SysID1=0x0508
SysName1=Armada E700,
SysID2=0x0538
SysName2=Armada M700,
SysID3=0x053C
SysName3=Armada M300,
SysID4=0x05BC
SysName4=Armada E500,
SysID5=0x05F2
SysName5=Armada V300,
SysID6=0x06F4
SysName6=Evo N400c,

[Devices]
VEN_1002&DEV_4C4D=RAGE MOBILITY AGP
VEN_1002&DEV_4C49=RAGE LT PRO PCI

[Software Dependencies]
PN=
SP=

[GR.Enhancements]
- DirectX 8.0 Support
- Implements new AYUV scheme for DVD captions

[GR.Solutions]

[GR.Notes]
DirectX 7.0 or later required.

[End-User Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Silent Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To silent install, use the /k switch from the command prompt.  For example, enter:

   <path>\SETUP /k
   where <path> is the drive and directory created in step 2

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Blind Installation Instructions]


[Uninstallation Instructions]


[Install Execution]
Install="setup.exe"
SilentInstall="setup.exe" /k -SMS
BlindInstall=
Uninstall=
InstallRecover=

[MSBATCH Installation Instructions]


[NTDS Installation Instructions]