[CVA File Information]
CVA Version=2.0
CVASyntaxVersion=1.0L

[Software Title]
FI=Evo Radeon M6-P Driver for Windows 2000.

[FI.Software Description]
This is the Windows 2000 video driver for the Radeon M6-P
graphics chip in the Evo series and models listed above.  It 
enables the features and functions of these graphics chips. 

[General]
Version=1.00
Revision=A
Pass=J
Installation=Installable,SilentInstall
UserMustBeLoggedIn=

[DetailFileInformation]
ATI2DRAB.DRV=<WINSYSDIR>,0x0005,0x000D,0x0001,0x0CA6,0x0000 

[SupportedLanguages]
Languages=FI


[Softpaq]
SoftpaqNumber=SP17618
SoftpaqEffectiveDate=07/17/01
SoftpaqUtilityVersion=4.0
SupersededSoftpaqNumber=None
PackageExtraction=

[Operating Systems]
WIN2K=OEM

[System Information]
SysID1=0x0744
SysName4=Evo N600c


[Devices]
VEN_1002&DEV_4C59=Radeon M6-P AGP

[Software Dependencies]
PN=
SP=

[FI.Enhancements]
- Initial Release

[FI.Solutions]

[FI.Notes]
DirectX 8.0 or later required.

[End-User Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Silent Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP -s
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Blind Installation Instructions]


[Uninstallation Instructions]


[Install Execution]
Install="setup.exe"
SilentInstall="setup.exe" -s -SMS
BlindInstall=
Uninstall=
InstallRecover=

[MSBATCH Installation Instructions]


[NTDS Installation Instructions]