[CVA File Information]
CVA Version=2.0
CVASyntaxVersion=1.0L

[Software Title]
IT=Radeon M6-P Driver for Windows 2000.

[IT.Software Description]
This is the Windows 2000 video driver for the 
Radeon M6-P graphics chip in the models listed.  It 
enables the features and functions of this graphics chip.

[General]
Version=1.00
Revision=A
Pass=8
Installation=Installable,SilentInstall
UserMustBeLoggedIn=

[DetailFileInformation]
ATI2DRAB.DRV=<WINSYSDIR>,0x0005,0x000D,0x0001,0x0CCB,0x0000 

[SupportedLanguages]
Languages=IT


[Softpaq]
SoftpaqNumber=SP18680
SoftpaqEffectiveDate=10/01/01
SoftpaqUtilityVersion=4.0
SupersededSoftpaqNumber=None
PackageExtraction=

[Operating Systems]
WIN2K=OEM

[System Information]
SysId1=0x0726
SysName1=Evo N160
SysId2=0x0724
SysName2=Evo N180
SysId3=0x0724
SysName3=Presario 1700
SysId4=0x0726
SysName4=Presario 2700


[Devices]
VEN_1002&DEV_4C59=Radeon M6-P AGP

[Software Dependencies]
PN=
SP=

[IT.Enhancements]
- Initial Release

[IT.Solutions]

[IT.Notes]
DirectX 8.0 or later required.

[End-User Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Silent Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP /k
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Blind Installation Instructions]


[Uninstallation Instructions]


[Install Execution]
Install="setup.exe"
SilentInstall="setup.exe /k"
BlindInstall=
Uninstall=
InstallRecover=

[MSBATCH Installation Instructions]


[NTDS Installation Instructions]