[CVA File Information]
CVA Version=2.0
CVASyntaxVersion=1.0L

[Software Title]
HU=Evo and Armada Rage Mobility Driver for Microsoft Windows XP

[HU.Software Description]
This is the Microsoft Windows XP video driver for Rage Mobility
graphics chips in the Armada and Evo models listed above.  It 
enables the features and functions of these graphics chips. 

[General]
Version=7.00
Revision=A
Pass=Hungarian
Installation=Installable,SilentInstall
UserMustBeLoggedIn=

[DetailFileInformation]
ATI2DRAB.DLL=<WINSYSDIR>,0x0006,0x000D,0x000A,0x1693,0x0000 

[SupportedLanguages]
Languages=HU

[Softpaq]
SoftpaqNumber=SP18906
SoftpaqEffectiveDate=10/25/2001
SoftpaqUtilityVersion=5.0
SupersededSoftpaqNumber=None
PackageExtraction=

[Operating Systems]
WINXP=OEM

[System Information]
SysID1=0x0508
SysName1=Armada E700,
SysID2=0x0538
SysName2=Armada M700,
SysID3=0x05BC
SysName3=Armada E500,
SysID4=0x06F4
SysName4=Evo N400c,
SysID5=0x0735
SysName5=Evo N200,

[Devices]
VEN_1002&DEV_4C4D=RAGE MOBILITY AGP
VEN_1002&DEV_4C49=RAGE LT PRO PCI
VEN_1002&DEV_4C52=RAGE MOBILITY PCI

[Software Dependencies]
PN=
SP=

[HU.Enhancements]
- Initial release

[HU.Solutions]

[HU.Notes]
DirectX 7.0 or later required.

[End-User Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Silent Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP /k
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Blind Installation Instructions]


[Uninstallation Instructions]


[Install Execution]
Install="setup.exe"
SilentInstall="setup.exe" /k -SMS
BlindInstall=
Uninstall=
InstallRecover=

[MSBATCH Installation Instructions]


[NTDS Installation Instructions]