[CVA File Information]
CVA Version=1

[Software Title]
US=HP Blade PC Optimization 

[US.Software Description]
Applying this SoftPaq makes the following HP-recommended operating system settings for optimal performance in the blade PC environment. 

Power Management:

- "PowerButtonAction" is set to Shutdown so that the power button shuts down Windows.

Timeouts:

- "Turn off Monitor" is set to 0 so that the monitor will not go to sleep.
- "Turn off Hard Disks" is set to 15 so that the hard disks power down after 15 minutes of inactivity.
- "System Standby" is set to 0 so that the computer never goes into Standby mode.
- "System Hibernates" is set to 0 so that the computer never hibernates.

Other Settings:

- DMA is turned on for both Drive 0 and Drive 1 storage devices.
- 48bit-LBA (Logical Block Addressing) support is enabled for ATAPI drives larger than 137GB.
- For no video ("headless") support a registry key is modified at every reboot to prevent compatability issues with 16-bit applications.
- NMI button support is enabled. Instead of giving a "Hardware Error" message, the OS will generate a full crash dump and not reboot.
- The screensaver is turned off.
- The "IdleWinStationPoolCount" value is changed from the default of 0 to 4. This prevents F5 health monitors from causing hard disk accesses that stop the drive from spinning down.

[General]
PN=SP28033
Version=4.00
Revision=A
Pass=1
Category=Operating System - Enhancements and QFEs

[SupportedLanguages]
Languages=Global
Countries=GBL

[DetailFileInformation]
SP28033.SYS=<WINSYSDIR>,0x0002,0x0000,0x0002,0x0002

[Softpaq]
SoftpaqNumber=SP28033
SupersededSoftpaqNumber=SP27990, SP26008

[Operating Systems]
WINXP32P=SP1

[Devices]


[System Information]
SysID1=0x08AC
SysName1=HP bc1000

[US.Enhancements]
    

[Install Execution]
SilentInstall="SP28033.exe" -s -a -silent -noreboot


[Private]
Private_SSMCompliant=1

[CVAGenerationToolDocumentStamp]
Generated by Hewlett-Packard Information Repository System Tool on 6/7/2004