[CVA File Information]
CVA Version=2
CVASyntaxVersion=1.6A4

[Software Title]
US=nVidia nForce SP Chipset/Network drivers

[US.Software Description]
	1.00,A,1 Int 1
	    * Initial release.
            * Support Sputnik 1.0.
            * 6.16.06 Vista chipset drivers for 32bit


[US.Software.Description]
This package contains the NVIDIA nForce Chipset/Network drivers for the
supported notebook models and operating systems.


[General]
PN=000000-000
Type=N/A
Category=Driver - Network
TargetPartition=Primary
PACKAGETYPE=PreinstallFull
Version=5.53
Revision=A                                                 
Pass=1                                                 
MaxEncryptionLevel=
RequiresAdminPriviledges=0
SystemMustBeRebooted=0
InstallableUpdate=0
VendorVersion=5.53
DistributionMethod=Internet,Pre Install,Restore CD

[Softpaq]
SoftpaqNumber=sp36077
SoftpaqEffectiveDate=June 11, 2007
SupersededSoftpaqNumber=SP35777

[DetailFileInformation]
nvsmu.sys=<WINSYSDIR>\drivers,0x0005,0x0000,0x0000,0x0000
nvstor32.sys=<WINSYSDIR>\drivers,0x0005,0x000a,0x0a28,0x03a3
nvmfdx32.sys=<WINSYSDIR>\drivers,0x0001,0x0000,0x0001,0x199b
nvsmu.sys=<WINSYSDIR>\drivers,0x0005,0x0000,0x0000,0x0000
nvstor64.sys=<WINSYSDIR>\drivers,0x0005,0x000a,0x0a28,0x03e0
nvmfdx64.sys=<WINSYSDIR>\drivers,0x0001,0x0000,0x0001,0x199b

[System Information]
SysId01=0x30BF
SysName01=HP Pavilion tx1000;HP Pavilion tx1200

[SupportedLanguages]
Languages=GLOBAL
Countries=GBL
Default_UI=US_UI

[Operating Systems]
WV32HB=OEM
WV32HP=OEM
WV32PR=OEM
WV32UL=OEM
WV64HB=OEM
WV64HP=OEM
WV64PR=OEM
WV64UL=OEM

[US.Enhancements]


[Install Execution]
Install ="Setup.exe"
SilentInstall="Setup.exe" -installide -s -k -n
ARCDInstall="Setup.exe" -installide -s -k -n
[End-user installation instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions. Entering "Y" to confirm the unpacking of files creates a new directory folder in the download directory.  All files are unpacked into this newly created directory.
3. After the directory has been created, installation of the software will start up automatically.  Follow the on-screen instructions.
4. After the installation is completed, you may delete the directory created in step 2 if you wish.
Compaq and the Compaq logo are trademarks of the Hewlett-Packard Company
in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective companies.

[Silent installation instructions]
1. Download the SoftPaq to a directory on your hard drive.
2. Execute the downloaded file and follow the on-screen instructions.
3. To silent install, run with the /k switch from the command prompt.  For example, enter:
   <path>\SETUP -s
   where <path> is the drive and directory created in step 2


[Devices]
PCI\VEN_10DE&DEV_0271&SUBSYS_30BF103C="NVIDIA nForce System Management Controller"
PCI\VEN_10DE&DEV_0266&SUBSYS_30BF103C="NVIDIA nForce Serial ATA Controller"
PCI\VEN_10DE&DEV_0269&SUBSYS_30BF103C="NVIDIA nForce Networking Controller"

[Software Dependencies]


[Private]
Private_SSMCompliant = 1
Private_ReleaseType=Routine Update
Private_ProductType = Notebooks

[Private_Fixes]
- Fixes display and compatibility issues that may occur
  when resuming from Suspend or Hibernation mode.

[Private_SoftpaqInstall]

1. Download the SoftPaq .EXE file to a directory on your hard drive.

2. Execute the downloaded file and follow the on-screen instructions.
[CVAToolDocumentStamp]
Generated by Mobile Release CVA Tool Version 1.0 using Syntax Version 1.6A4 on 6/20/2007 2:10:11 PM
Copyright (c) 2007 Hewlett-Packard Development Company, L.P.