;DrIvEr DeScRiPtIoN ;VeRsIoN = 4.09 Novell LAN Installation Information File for FETNWSC ;CoPyRiGhT = (c) Copyright 2001 by VIA. All rights reserved. VER: 4.09 ; This LDI version SYN: 1.00 ; ---------------------------------- ; VT3053 ; ---------------------------------- DR VT_3053 { DES: $VT_DES_3053 HELP: $VT_HELP PAR: 2.00 ; Hardware Instance Number Aware PROD: 'PCI.1106.3053.*.*.*' ; VT3053 FILE: FETNWSC.LAN ;@# CLIENT: FETNWSC.LAN ;@# ALIAS: FETNWSC.LAN ;@# SPROD: 'VIA~ VIA Rhine III Management Adapter' PROMPT SLOT OPTIONAL { DES: $VT_SLOT_DES HELP: $VT_SLOT_HLP TYPE: DECIMAL(5) VAL: 1-65535 DEF: UNDEFINED OUT: 'SLOT=%s' } PR NODE { } FR FrameSelect { CH: 'Ethernet_802.3' CH: 'Ethernet_802.2' CH: 'Ethernet_SNAP' CH: 'Ethernet_II' DEF: 1,2 ; Default flame type = 802.3, 802.2 } ; --------------------------------------------------------- ; LIST keywords [CONNECTIONTYPE]: ; AUTOSENSE, 10BASET, 10BASETFD, 100BASETX, 100BASETXFD ; --------------------------------------------------------- LI CONNECTIONTYPE OPT { DES: $VT_CONTYPE_DES HELP: $VT_CONTYPE_HLP CD: $VT_CAUTO_CD CH: $VT_CAUTO_CH CD: $VT_C10H_CD CH: $VT_C10H_CH CD: $VT_C10F_CD CH: $VT_C10F_CH CD: $VT_C100H_CD CH: $VT_C100H_CH CD: $VT_C100F_CD CH: $VT_C100F_CH DEF: 1 ; DEFAULT=AUTOSENSE OUT: 'CONNECTIONTYPE=%s' ; if use this, driver need to ; support extra keyword routine for ; 'CONNECTIONTYPE' } ; --------------------------------------------------------- ; keywords [VID]: ; 0 ~ 4096 ; --------------------------------------------------------- PROMPT VID OPTIONAL { DES: $VT_VID_DES HELP: $VT_VID_HLP TYPE: DECIMAL(4) VAL: 1-4094 DEF: UNDEFINED OUT: 'VID=%s' } ; -------------------------------------------------- ; LIST keywords [FLOW_CONTROL]: ; Enable, Disable, Hardware_default ; -------------------------------------------------- LI FLOW_CONTROL OPT { DES: $VT_FLOWCTL_DES HELP: $VT_FLOWCTL_HLP CD: $VT_FHD_CD CH: $VT_FHD_CH CD: $VT_FENA_CD CH: $VT_FENA_CH CD: $VT_FDIS_CD CH: $VT_FDIS_CH DEF: 3 ; DEFAULT=Disable OUT: 'FLOW_CONTROL=%s' ; if use this, driver need to ; support extra keyword routine for ; 'FLOW_CONTROL' } ; -------------------------------------------------- ; LIST keywords [TAG]: ; Enable, Disable ; -------------------------------------------------- LI TAG OPT { DES: $VT_TAG_DES HELP: $VT_TAG_HLP CD: $VT_TENA_CD CH: $VT_TENA_CH CD: $VT_TDIS_CD CH: $VT_TDIS_CH DEF: 2 ; DEFAULT=Disable OUT: 'TAG=%s' ; if use this, driver need to ; support extra keyword routine for ; 'TAG' ;DES: $VT_PRI_DES ;HELP: $VT_PRI_HLP ;CD: $VT_PENA_CD ;CH: $VT_PENA_CH ;CD: $VT_PDIS_CD ;CH: $VT_PDIS_CH ;DEF: 2 ; DEFAULT=Disable ;OUT: 'PRIORITY=%s' ; if use this, driver need to ; support extra keyword routine for ; 'PRIORITY' } ; -------------------------------------------------- ; LIST keywords [HCHECKSUM]: ; Enable, Disable ; -------------------------------------------------- LI HCHECKSUM OPT { DES: $VT_HCS_DES HELP: $VT_HCS_HLP CD: $VT_HENA_CD CH: $VT_HENA_CH CD: $VT_HDIS_CD CH: $VT_HDIS_CH DEF: 1 ; DEFAULT=Enable OUT: 'HCHECKSUM=%s' ; if use this, driver need to ; support extra keyword routine for ; 'HCHECKSUM' } ; --------------------------------------------------------- ; keywords [TBUF]: ; 48 ~ 128 ; --------------------------------------------------------- PROMPT TBUF OPTIONAL { DES: $VT_TBUF_DES HELP: $VT_TBUF_HLP TYPE: DECIMAL(3) VAL: 48-128 DEF: 64 OUT: 'TBUF=%s' } ; --------------------------------------------------------- ; keywords [RBUF]: ; 64 ~ 128 ; --------------------------------------------------------- PROMPT RBUF OPTIONAL { DES: $VT_RBUF_DES HELP: $VT_RBUF_HLP TYPE: DECIMAL(3) VAL: 64-128 DEF: 64 OUT: 'RBUF=%s' } } ; ---------------------------------- ; VT3106 ; ---------------------------------- DR VT_3106 { DES: $VT_DES_3106 HELP: $VT_HELP PAR: 2.00 ; Hardware Instance Number Aware PROD: 'PCI.1106.3106.*.*.*' ; VT3106 FILE: FETNWSC.LAN ;@# CLIENT: FETNWSC.LAN ;@# ALIAS: FETNWSC.LAN ;@# SPROD: 'VIA~ VIA Rhine III Fast Ethernet Adapter' PROMPT SLOT OPTIONAL { DES: $VT_SLOT_DES HELP: $VT_SLOT_HLP TYPE: DECIMAL(5) VAL: 1-65535 DEF: UNDEFINED OUT: 'SLOT=%s' } PR NODE { } FR FrameSelect { CH: 'Ethernet_802.3' CH: 'Ethernet_802.2' CH: 'Ethernet_SNAP' CH: 'Ethernet_II' DEF: 1,2 ; Default flame type = 802.3, 802.2 } ; --------------------------------------------------------- ; LIST keywords [CONNECTIONTYPE]: ; AUTOSENSE, 10BASET, 10BASETFD, 100BASETX, 100BASETXFD ; --------------------------------------------------------- LI CONNECTIONTYPE OPT { DES: $VT_CONTYPE_DES HELP: $VT_CONTYPE_HLP CD: $VT_CAUTO_CD CH: $VT_CAUTO_CH CD: $VT_C10H_CD CH: $VT_C10H_CH CD: $VT_C10F_CD CH: $VT_C10F_CH CD: $VT_C100H_CD CH: $VT_C100H_CH CD: $VT_C100F_CD CH: $VT_C100F_CH DEF: 1 ; DEFAULT=AUTOSENSE OUT: 'CONNECTIONTYPE=%s' ; if use this, driver need to ; support extra keyword routine for ; 'CONNECTIONTYPE' } ; -------------------------------------------------- ; LIST keywords [FLOW_CONTROL]: ; Enable, Disable, Hardware_default ; -------------------------------------------------- LI FLOW_CONTROL OPT { DES: $VT_FLOWCTL_DES HELP: $VT_FLOWCTL_HLP CD: $VT_FHD_CD CH: $VT_FHD_CH CD: $VT_FENA_CD CH: $VT_FENA_CH CD: $VT_FDIS_CD CH: $VT_FDIS_CH DEF: 3 ; DEFAULT=Disable OUT: 'FLOW_CONTROL=%s' ; if use this, driver need to ; support extra keyword routine for ; 'FLOW_CONTROL' } ; --------------------------------------------------------- ; keywords [TBUF]: ; 48 ~ 128 ; --------------------------------------------------------- PROMPT TBUF OPTIONAL { DES: $VT_TBUF_DES HELP: $VT_TBUF_HLP TYPE: DECIMAL(3) VAL: 48-128 DEF: 64 OUT: 'TBUF=%s' } ; --------------------------------------------------------- ; keywords [RBUF]: ; 64 ~ 128 ; --------------------------------------------------------- PROMPT RBUF OPTIONAL { DES: $VT_RBUF_DES HELP: $VT_RBUF_HLP TYPE: DECIMAL(3) VAL: 64-128 DEF: 64 OUT: 'RBUF=%s' } } ; ---------------------------------- ; VT3065 ; ---------------------------------- DR VT_3065 { DES: $VT_DES_3065 HELP: $VT_HELP PAR: 2.00 ; Hardware Instance Number Aware PROD: 'PCI.1106.3065.*.*.*' ; VT3065 FILE: FETNWSC.LAN ;@# CLIENT: FETNWSC.LAN ;@# ALIAS: FETNWSC.LAN ;@# SPROD: 'VIA~ VIA Rhine II Fast Ethernet Adapter' PROMPT SLOT OPTIONAL { DES: $VT_SLOT_DES HELP: $VT_SLOT_HLP TYPE: DECIMAL(5) VAL: 1-65535 DEF: UNDEFINED OUT: 'SLOT=%s' } PR NODE { } FR FrameSelect { CH: 'Ethernet_802.3' CH: 'Ethernet_802.2' CH: 'Ethernet_SNAP' CH: 'Ethernet_II' DEF: 1,2 ; Default flame type = 802.3, 802.2 } ; --------------------------------------------------------- ; LIST keywords [CONNECTIONTYPE]: ; AUTOSENSE, 10BASET, 10BASETFD, 100BASETX, 100BASETXFD ; --------------------------------------------------------- LI CONNECTIONTYPE OPT { DES: $VT_CONTYPE_DES HELP: $VT_CONTYPE_HLP CD: $VT_CAUTO_CD CH: $VT_CAUTO_CH CD: $VT_C10H_CD CH: $VT_C10H_CH CD: $VT_C10F_CD CH: $VT_C10F_CH CD: $VT_C100H_CD CH: $VT_C100H_CH CD: $VT_C100F_CD CH: $VT_C100F_CH DEF: 1 ; DEFAULT=AUTOSENSE OUT: 'CONNECTIONTYPE=%s' ; if use this, driver need to ; support extra keyword routine for ; 'CONNECTIONTYPE' } ; -------------------------------------------------- ; LIST keywords [FLOW_CONTROL]: ; Enable, Disable, Hardware_default ; -------------------------------------------------- LI FLOW_CONTROL OPT { DES: $VT_FLOWCTL_DES HELP: $VT_FLOWCTL_HLP CD: $VT_FHD_CD CH: $VT_FHD_CH CD: $VT_FENA_CD CH: $VT_FENA_CH CD: $VT_FDIS_CD CH: $VT_FDIS_CH DEF: 3 ; DEFAULT=Disable OUT: 'FLOW_CONTROL=%s' ; if use this, driver need to ; support extra keyword routine for ; 'FLOW_CONTROL' } ; --------------------------------------------------------- ; keywords [TBUF]: ; 48 ~ 128 ; --------------------------------------------------------- PROMPT TBUF OPTIONAL { DES: $VT_TBUF_DES HELP: $VT_TBUF_HLP TYPE: DECIMAL(3) VAL: 48-128 DEF: 64 OUT: 'TBUF=%s' } ; --------------------------------------------------------- ; keywords [RBUF]: ; 64 ~ 128 ; --------------------------------------------------------- PROMPT RBUF OPTIONAL { DES: $VT_RBUF_DES HELP: $VT_RBUF_HLP TYPE: DECIMAL(3) VAL: 64-128 DEF: 64 OUT: 'RBUF=%s' } } ; ---------------------------------- ; VT3043 ; ---------------------------------- DR VT_3043 { DES: $VT_DES_3043 HELP: $VT_HELP PAR: 2.00 ; Hardware Instance Number Aware PROD: 'PCI.1106.3043.*.*.*' ; VT3043 FILE: FETNWSC.LAN ;@# CLIENT: FETNWSC.LAN ;@# ALIAS: FETNWSC.LAN ;@# SPROD: 'VIA~ VIA VT86C100A Rhine Fast Ethernet Adapter' PROMPT SLOT OPTIONAL { DES: $VT_SLOT_DES HELP: $VT_SLOT_HLP TYPE: DECIMAL(5) VAL: 1-65535 DEF: UNDEFINED OUT: 'SLOT=%s' } PR NODE { } FR FrameSelect { CH: 'Ethernet_802.3' CH: 'Ethernet_802.2' CH: 'Ethernet_SNAP' CH: 'Ethernet_II' DEF: 1,2 ; Default flame type = 802.3, 802.2 } ; --------------------------------------------------------- ; LIST keywords [CONNECTIONTYPE]: ; AUTOSENSE, 10BASET, 10BASETFD, 100BASETX, 100BASETXFD ; --------------------------------------------------------- LI CONNECTIONTYPE OPT { DES: $VT_CONTYPE_DES HELP: $VT_CONTYPE_HLP CD: $VT_CAUTO_CD CH: $VT_CAUTO_CH CD: $VT_C10H_CD CH: $VT_C10H_CH CD: $VT_C10F_CD CH: $VT_C10F_CH CD: $VT_C100H_CD CH: $VT_C100H_CH CD: $VT_C100F_CD CH: $VT_C100F_CH DEF: 1 ; DEFAULT=AUTOSENSE OUT: 'CONNECTIONTYPE=%s' ; if use this, driver need to ; support extra keyword routine for ; 'CONNECTIONTYPE' } ; --------------------------------------------------------- ; keywords [TBUF]: ; 48 ~ 128 ; --------------------------------------------------------- PROMPT TBUF OPTIONAL { DES: $VT_TBUF_DES HELP: $VT_TBUF_HLP TYPE: DECIMAL(3) VAL: 48-128 DEF: 64 OUT: 'TBUF=%s' } ; --------------------------------------------------------- ; keywords [RBUF]: ; 64 ~ 128 ; --------------------------------------------------------- PROMPT RBUF OPTIONAL { DES: $VT_RBUF_DES HELP: $VT_RBUF_HLP TYPE: DECIMAL(3) VAL: 64-128 DEF: 64 OUT: 'RBUF=%s' } } DLANG: 4 ;English $VT_DUPLEX_DES= "Full Duplex mode" $VT_DUPLEX_HLP= "Enable the Full Duplex Function." $VT_AUTO_DES = "AUTO mode" $VT_AUTO_HLP = "Enable the AUTO Negotiation Function." $VT_SPEED_DES = "SPEED selection" $VT_SPEED_HLP = "Select the SPEED between 10 and 100." $VT_SLOT_DES = "Slot" $VT_SLOT_HLP = "Enter the PCI Slot number of your LAN card to enable PCI auto config function." $VT_CONTYPE_DES = "Media and Line Speed" $VT_CONTYPE_HLP = "Choose the connection/media type you would like to use, or NONE for preprogramed card's default." $VT_PRI_DES = "Priority Transmit Support" $VT_PRI_HLP = "Choose the priority transmit function you would like to use, or NONE for preprogramed card's default" $VT_TAG_DES = "Tagging ability Support" $VT_TAG_HLP = "Choose the tagging function you would like to use, or NONE for preprogramed card's default" $VT_FLOWCTL_DES = "Flow control ability" $VT_FLOWCTL_HLP = "Choose the flow control ability you would like to use, or NONE for preprogramed card's default." $VT_HCS_DES = "Hardware Checksum Support" $VT_HCS_HLP = "Choose the hardware checksum function you would like to use, or NONE for preprogramed card's default" $VT_VID_DES = "VID number support for VLAN" $VT_VID_HLP = "Enter the VID number of your LAN card to support VLAN function." $VT_TBUF_DES = "TD number" $VT_TBUF_HLP = "Enter the TD number to set TransmitBuffers" $VT_RBUF_DES = "RD number" $VT_RBUF_HLP = "Enter the RD number to set ReceiveBuffers" $VT_CAUTO_CD = "Auto-Sense media type" $VT_CAUTO_CH = "Autosense" $VT_C10H_CD = "Twisted Pair 10MBPS" $VT_C10H_CH = "10BASET" $VT_C10F_CD = "Twisted pair - Full Duplex 10MBPS" $VT_C10F_CH = "10BASETFD" $VT_C100H_CD = "Twisted pair - Full Duplex 100MBPS" $VT_C100H_CH = "100BASETXFD" $VT_C100F_CD = "Fast Ethernet 100MBPS" $VT_C100F_CH = "100BASETX" $VT_FHD_CD = "Use Hardware Default (Auto)" $VT_FHD_CH = "Hardware_Default" $VT_FENA_CD = "Enable Flow Control" $VT_FENA_CH = "Enable" $VT_FDIS_CD = "Disable Flow Control" $VT_FDIS_CH = "Disable" $VT_PENA_CD = "Enable Priority Transmit" $VT_PENA_CH = "Enable" $VT_PDIS_CD = "Disable Priority Transmit" $VT_PDIS_CH = "Disable" $VT_TENA_CD = "Enable Tagging" $VT_TENA_CH = "Enable" $VT_TDIS_CD = "Disable Tagging" $VT_TDIS_CH = "Disable" $VT_HENA_CD = "Enable Hardware Checksum" $VT_HENA_CH = "Enable" $VT_HDIS_CD = "Disable Hardware Checksum" $VT_HDIS_CH = "Disable" $VT_DES = "VIA Rhine Family Fast Ethernet Adapter" $VT_DES_3053 = "VIA Rhine III Management Adapter" $VT_DES_3106 = "VIA Rhine III Fast Ethernet Adapter" $VT_DES_3065 = "VIA Rhine II Fast Ethernet Adapter" $VT_DES_3043 = "VIA VT86C100A Rhine Fast Ethernet Adapter" $VT_HELP = "This driver (FETNWSC.LAN) supports PCI Fast Ethernet network boards installed in PCI expansion slots in server. You can install up to four boards as long as their settings do not conflict." LANG: 6 ;French $VT_DUPLEX_DES= "Full Duplex mode" $VT_DUPLEX_HLP= "Enable the Full Duplex Function." $VT_AUTO_DES = "AUTO mode" $VT_AUTO_HLP = "Enable the AUTO Negotiation Function." $VT_SPEED_DES = "SPEED selection" $VT_SPEED_HLP = "Select the SPEED between 10 and 100." $VT_SLOT_DES = "Slot" $VT_SLOT_HLP = "Enter the PCI Slot number of your LAN card to enable PCI auto config function." $VT_CONTYPE_DES = "Media and Line Speed" $VT_CONTYPE_HLP = "Choose the connection/media type you would like to use, or NONE for preprogramed card's default." $VT_PRI_DES = "Priority Transmit Support" $VT_PRI_HLP = "Choose the priority transmit function you would like to use, or NONE for preprogramed card's default" $VT_TAG_DES = "Tagging ability Support" $VT_TAG_HLP = "Choose the tagging function you would like to use, or NONE for preprogramed card's default" $VT_FLOWCTL_DES = "Flow control ability" $VT_FLOWCTL_HLP = "Choose the flow control ability you would like to use, or NONE for preprogramed card's default." $VT_HCS_DES = "Hardware Checksum Support" $VT_HCS_HLP = "Choose the hardware checksum function you would like to use, or NONE for preprogramed card's default" $VT_VID_DES = "VID number support for VLAN" $VT_VID_HLP = "Enter the VID number of your LAN card to support VLAN function." $VT_TBUF_DES = "TD number" $VT_TBUF_HLP = "Enter the TD number to set TransmitBuffers" $VT_RBUF_DES = "RD number" $VT_RBUF_HLP = "Enter the RD number to set ReceiveBuffers" $VT_CAUTO_CD = "Auto-Sense media type" $VT_CAUTO_CH = "Autosense" $VT_C10H_CD = "Twisted Pair 10MBPS" $VT_C10H_CH = "10BASET" $VT_C10F_CD = "Twisted pair - Full Duplex 10MBPS" $VT_C10F_CH = "10BASETFD" $VT_C100H_CD = "Twisted pair - Full Duplex 100MBPS" $VT_C100H_CH = "100BASETXFD" $VT_C100F_CD = "Fast Ethernet 100MBPS" $VT_C100F_CH = "100BASETX" $VT_FHD_CD = "Use Hardware Default (Auto)" $VT_FHD_CH = "Hardware_Default" $VT_FENA_CD = "Enable Flow Control" $VT_FENA_CH = "Enable" $VT_FDIS_CD = "Disable Flow Control" $VT_FDIS_CH = "Disable" $VT_PENA_CD = "Enable Priority Transmit" $VT_PENA_CH = "Enable" $VT_PDIS_CD = "Disable Priority Transmit" $VT_PDIS_CH = "Disable" $VT_TENA_CD = "Enable Tagging" $VT_TENA_CH = "Enable" $VT_TDIS_CD = "Disable Tagging" $VT_TDIS_CH = "Disable" $VT_HENA_CD = "Enable Hardware Checksum" $VT_HENA_CH = "Enable" $VT_HDIS_CD = "Disable Hardware Checksum" $VT_HDIS_CH = "Disable" $VT_DES = "VIA Rhine Family Fast Ethernet Adapter" $VT_DES_3053 = "VIA Rhine III Management Adapter" $VT_DES_3106 = "VIA Rhine III Fast Ethernet Adapter" $VT_DES_3065 = "VIA Rhine II Fast Ethernet Adapter" $VT_DES_3043 = "VIA VT86C100A Rhine Fast Ethernet Adapter" $VT_HELP = "This driver (FETNWSC.LAN) supports PCI Fast Ethernet network boards installed in PCI expansion slots in server. You can install up to four boards as long as their settings do not conflict." LANG: 7 ;German $VT_DUPLEX_DES= "Full Duplex mode" $VT_DUPLEX_HLP= "Enable the Full Duplex Function." $VT_AUTO_DES = "AUTO mode" $VT_AUTO_HLP = "Enable the AUTO Negotiation Function." $VT_SPEED_DES = "SPEED selection" $VT_SPEED_HLP = "Select the SPEED between 10 and 100." $VT_SLOT_DES = "Slot" $VT_SLOT_HLP = "Enter the PCI Slot number of your LAN card to enable PCI auto config function." $VT_CONTYPE_DES = "Media and Line Speed" $VT_CONTYPE_HLP = "Choose the connection/media type you would like to use, or NONE for preprogramed card's default." $VT_PRI_DES = "Priority Transmit Support" $VT_PRI_HLP = "Choose the priority transmit function you would like to use, or NONE for preprogramed card's default" $VT_TAG_DES = "Tagging ability Support" $VT_TAG_HLP = "Choose the tagging function you would like to use, or NONE for preprogramed card's default" $VT_FLOWCTL_DES = "Flow control ability" $VT_FLOWCTL_HLP = "Choose the flow control ability you would like to use, or NONE for preprogramed card's default." $VT_HCS_DES = "Hardware Checksum Support" $VT_HCS_HLP = "Choose the hardware checksum function you would like to use, or NONE for preprogramed card's default" $VT_VID_DES = "VID number support for VLAN" $VT_VID_HLP = "Enter the VID number of your LAN card to support VLAN function." $VT_TBUF_DES = "TD number" $VT_TBUF_HLP = "Enter the TD number to set TransmitBuffers" $VT_RBUF_DES = "RD number" $VT_RBUF_HLP = "Enter the RD number to set ReceiveBuffers" $VT_CAUTO_CD = "Auto-Sense media type" $VT_CAUTO_CH = "Autosense" $VT_C10H_CD = "Twisted Pair 10MBPS" $VT_C10H_CH = "10BASET" $VT_C10F_CD = "Twisted pair - Full Duplex 10MBPS" $VT_C10F_CH = "10BASETFD" $VT_C100H_CD = "Twisted pair - Full Duplex 100MBPS" $VT_C100H_CH = "100BASETXFD" $VT_C100F_CD = "Fast Ethernet 100MBPS" $VT_C100F_CH = "100BASETX" $VT_FHD_CD = "Use Hardware Default (Auto)" $VT_FHD_CH = "Hardware_Default" $VT_FENA_CD = "Enable Flow Control" $VT_FENA_CH = "Enable" $VT_FDIS_CD = "Disable Flow Control" $VT_FDIS_CH = "Disable" $VT_PENA_CD = "Enable Priority Transmit" $VT_PENA_CH = "Enable" $VT_PDIS_CD = "Disable Priority Transmit" $VT_PDIS_CH = "Disable" $VT_TENA_CD = "Enable Tagging" $VT_TENA_CH = "Enable" $VT_TDIS_CD = "Disable Tagging" $VT_TDIS_CH = "Disable" $VT_HENA_CD = "Enable Hardware Checksum" $VT_HENA_CH = "Enable" $VT_HDIS_CD = "Disable Hardware Checksum" $VT_HDIS_CH = "Disable" $VT_DES = "VIA Rhine Family Fast Ethernet Adapter" $VT_DES_3053 = "VIA Rhine III Management Adapter" $VT_DES_3106 = "VIA Rhine III Fast Ethernet Adapter" $VT_DES_3065 = "VIA Rhine II Fast Ethernet Adapter" $VT_DES_3043 = "VIA VT86C100A Rhine Fast Ethernet Adapter" $VT_HELP = "This driver (FETNWSC.LAN) supports PCI Fast Ethernet network boards installed in PCI expansion slots in server. You can install up to four boards as long as their settings do not conflict." LANG: 8 ;Italian $VT_DUPLEX_DES= "Full Duplex mode" $VT_DUPLEX_HLP= "Enable the Full Duplex Function." $VT_AUTO_DES = "AUTO mode" $VT_AUTO_HLP = "Enable the AUTO Negotiation Function." $VT_SPEED_DES = "SPEED selection" $VT_SPEED_HLP = "Select the SPEED between 10 and 100." $VT_SLOT_DES = "Slot" $VT_SLOT_HLP = "Enter the PCI Slot number of your LAN card to enable PCI auto config function." $VT_CONTYPE_DES = "Media and Line Speed" $VT_CONTYPE_HLP = "Choose the connection/media type you would like to use, or NONE for preprogramed card's default." $VT_PRI_DES = "Priority Transmit Support" $VT_PRI_HLP = "Choose the priority transmit function you would like to use, or NONE for preprogramed card's default" $VT_TAG_DES = "Tagging ability Support" $VT_TAG_HLP = "Choose the tagging function you would like to use, or NONE for preprogramed card's default" $VT_FLOWCTL_DES = "Flow control ability" $VT_FLOWCTL_HLP = "Choose the flow control ability you would like to use, or NONE for preprogramed card's default." $VT_HCS_DES = "Hardware Checksum Support" $VT_HCS_HLP = "Choose the hardware checksum function you would like to use, or NONE for preprogramed card's default" $VT_VID_DES = "VID number support for VLAN" $VT_VID_HLP = "Enter the VID number of your LAN card to support VLAN function." $VT_TBUF_DES = "TD number" $VT_TBUF_HLP = "Enter the TD number to set TransmitBuffers" $VT_RBUF_DES = "RD number" $VT_RBUF_HLP = "Enter the RD number to set ReceiveBuffers" $VT_CAUTO_CD = "Auto-Sense media type" $VT_CAUTO_CH = "Autosense" $VT_C10H_CD = "Twisted Pair 10MBPS" $VT_C10H_CH = "10BASET" $VT_C10F_CD = "Twisted pair - Full Duplex 10MBPS" $VT_C10F_CH = "10BASETFD" $VT_C100H_CD = "Twisted pair - Full Duplex 100MBPS" $VT_C100H_CH = "100BASETXFD" $VT_C100F_CD = "Fast Ethernet 100MBPS" $VT_C100F_CH = "100BASETX" $VT_FHD_CD = "Use Hardware Default (Auto)" $VT_FHD_CH = "Hardware_Default" $VT_FENA_CD = "Enable Flow Control" $VT_FENA_CH = "Enable" $VT_FDIS_CD = "Disable Flow Control" $VT_FDIS_CH = "Disable" $VT_PENA_CD = "Enable Priority Transmit" $VT_PENA_CH = "Enable" $VT_PDIS_CD = "Disable Priority Transmit" $VT_PDIS_CH = "Disable" $VT_TENA_CD = "Enable Tagging" $VT_TENA_CH = "Enable" $VT_TDIS_CD = "Disable Tagging" $VT_TDIS_CH = "Disable" $VT_HENA_CD = "Enable Hardware Checksum" $VT_HENA_CH = "Enable" $VT_HDIS_CD = "Disable Hardware Checksum" $VT_HDIS_CH = "Disable" $VT_DES = "VIA Rhine Family Fast Ethernet Adapter" $VT_DES_3053 = "VIA Rhine III Management Adapter" $VT_DES_3106 = "VIA Rhine III Fast Ethernet Adapter" $VT_DES_3065 = "VIA Rhine II Fast Ethernet Adapter" $VT_DES_3043 = "VIA VT86C100A Rhine Fast Ethernet Adapter" $VT_HELP = "This driver (FETNWSC.LAN) supports PCI Fast Ethernet network boards installed in PCI expansion slots in server. You can install up to four boards as long as their settings do not conflict." LANG: 14 ;Spanish $VT_DUPLEX_DES= "Full Duplex mode" $VT_DUPLEX_HLP= "Enable the Full Duplex Function." $VT_AUTO_DES = "AUTO mode" $VT_AUTO_HLP = "Enable the AUTO Negotiation Function." $VT_SPEED_DES = "SPEED selection" $VT_SPEED_HLP = "Select the SPEED between 10 and 100." $VT_SLOT_DES = "Slot" $VT_SLOT_HLP = "Enter the PCI Slot number of your LAN card to enable PCI auto config function." $VT_CONTYPE_DES = "Media and Line Speed" $VT_CONTYPE_HLP = "Choose the connection/media type you would like to use, or NONE for preprogramed card's default." $VT_PRI_DES = "Priority Transmit Support" $VT_PRI_HLP = "Choose the priority transmit function you would like to use, or NONE for preprogramed card's default" $VT_TAG_DES = "Tagging ability Support" $VT_TAG_HLP = "Choose the tagging function you would like to use, or NONE for preprogramed card's default" $VT_FLOWCTL_DES = "Flow control ability" $VT_FLOWCTL_HLP = "Choose the flow control ability you would like to use, or NONE for preprogramed card's default." $VT_HCS_DES = "Hardware Checksum Support" $VT_HCS_HLP = "Choose the hardware checksum function you would like to use, or NONE for preprogramed card's default" $VT_VID_DES = "VID number support for VLAN" $VT_VID_HLP = "Enter the VID number of your LAN card to support VLAN function." $VT_TBUF_DES = "TD number" $VT_TBUF_HLP = "Enter the TD number to set TransmitBuffers" $VT_RBUF_DES = "RD number" $VT_RBUF_HLP = "Enter the RD number to set ReceiveBuffers" $VT_CAUTO_CD = "Auto-Sense media type" $VT_CAUTO_CH = "Autosense" $VT_C10H_CD = "Twisted Pair 10MBPS" $VT_C10H_CH = "10BASET" $VT_C10F_CD = "Twisted pair - Full Duplex 10MBPS" $VT_C10F_CH = "10BASETFD" $VT_C100H_CD = "Twisted pair - Full Duplex 100MBPS" $VT_C100H_CH = "100BASETXFD" $VT_C100F_CD = "Fast Ethernet 100MBPS" $VT_C100F_CH = "100BASETX" $VT_FHD_CD = "Use Hardware Default (Auto)" $VT_FHD_CH = "Hardware_Default" $VT_FENA_CD = "Enable Flow Control" $VT_FENA_CH = "Enable" $VT_FDIS_CD = "Disable Flow Control" $VT_FDIS_CH = "Disable" $VT_PENA_CD = "Enable Priority Transmit" $VT_PENA_CH = "Enable" $VT_PDIS_CD = "Disable Priority Transmit" $VT_PDIS_CH = "Disable" $VT_TENA_CD = "Enable Tagging" $VT_TENA_CH = "Enable" $VT_TDIS_CD = "Disable Tagging" $VT_TDIS_CH = "Disable" $VT_HENA_CD = "Enable Hardware Checksum" $VT_HENA_CH = "Enable" $VT_HDIS_CD = "Disable Hardware Checksum" $VT_HDIS_CH = "Disable" $VT_DES = "VIA Rhine Family Fast Ethernet Adapter" $VT_DES_3053 = "VIA Rhine III Management Adapter" $VT_DES_3106 = "VIA Rhine III Fast Ethernet Adapter" $VT_DES_3065 = "VIA Rhine II Fast Ethernet Adapter" $VT_DES_3043 = "VIA VT86C100A Rhine Fast Ethernet Adapter" $VT_HELP = "This driver (FETNWSC.LAN) supports PCI Fast Ethernet network boards installed in PCI expansion slots in server. You can install up to four boards as long as their settings do not conflict." LANG: 9 ;Japanese $VT_DUPLEX_DES= "Full Duplex mode" $VT_DUPLEX_HLP= "Enable the Full Duplex Function." $VT_AUTO_DES = "AUTO mode" $VT_AUTO_HLP = "Enable the AUTO Negotiation Function." $VT_SPEED_DES = "SPEED selection" $VT_SPEED_HLP = "Select the SPEED between 10 and 100." $VT_SLOT_DES = "Slot" $VT_SLOT_HLP = "Enter the PCI Slot number of your LAN card to enable PCI auto config function." $VT_CONTYPE_DES = "Media and Line Speed" $VT_CONTYPE_HLP = "Choose the connection/media type you would like to use, or NONE for preprogramed card's default." $VT_PRI_DES = "Priority Transmit Support" $VT_PRI_HLP = "Choose the priority transmit function you would like to use, or NONE for preprogramed card's default" $VT_TAG_DES = "Tagging ability Support" $VT_TAG_HLP = "Choose the tagging function you would like to use, or NONE for preprogramed card's default" $VT_FLOWCTL_DES = "Flow control ability" $VT_FLOWCTL_HLP = "Choose the flow control ability you would like to use, or NONE for preprogramed card's default." $VT_HCS_DES = "Hardware Checksum Support" $VT_HCS_HLP = "Choose the hardware checksum function you would like to use, or NONE for preprogramed card's default" $VT_VID_DES = "VID number support for VLAN" $VT_VID_HLP = "Enter the VID number of your LAN card to support VLAN function." $VT_TBUF_DES = "TD number" $VT_TBUF_HLP = "Enter the TD number to set TransmitBuffers" $VT_RBUF_DES = "RD number" $VT_RBUF_HLP = "Enter the RD number to set ReceiveBuffers" $VT_CAUTO_CD = "Auto-Sense media type" $VT_CAUTO_CH = "Autosense" $VT_C10H_CD = "Twisted Pair 10MBPS" $VT_C10H_CH = "10BASET" $VT_C10F_CD = "Twisted pair - Full Duplex 10MBPS" $VT_C10F_CH = "10BASETFD" $VT_C100H_CD = "Twisted pair - Full Duplex 100MBPS" $VT_C100H_CH = "100BASETXFD" $VT_C100F_CD = "Fast Ethernet 100MBPS" $VT_C100F_CH = "100BASETX" $VT_FHD_CD = "Use Hardware Default (Auto)" $VT_FHD_CH = "Hardware_Default" $VT_FENA_CD = "Enable Flow Control" $VT_FENA_CH = "Enable" $VT_FDIS_CD = "Disable Flow Control" $VT_FDIS_CH = "Disable" $VT_PENA_CD = "Enable Priority Transmit" $VT_PENA_CH = "Enable" $VT_PDIS_CD = "Disable Priority Transmit" $VT_PDIS_CH = "Disable" $VT_TENA_CD = "Enable Tagging" $VT_TENA_CH = "Enable" $VT_TDIS_CD = "Disable Tagging" $VT_TDIS_CH = "Disable" $VT_HENA_CD = "Enable Hardware Checksum" $VT_HENA_CH = "Enable" $VT_HDIS_CD = "Disable Hardware Checksum" $VT_HDIS_CH = "Disable" $VT_DES = "VIA Rhine Family Fast Ethernet Adapter" $VT_DES_3053 = "VIA Rhine III Management Adapter" $VT_DES_3106 = "VIA Rhine III Fast Ethernet Adapter" $VT_DES_3065 = "VIA Rhine II Fast Ethernet Adapter" $VT_DES_3043 = "VIA VT86C100A Rhine Fast Ethernet Adapter" $VT_HELP = "This driver (FETNWSC.LAN) supports PCI Fast Ethernet network boards installed in PCI expansion slots in server. You can install up to four boards as long as their settings do not conflict." LANG: 10 ;Korean $VT_DUPLEX_DES= "Full Duplex mode" $VT_DUPLEX_HLP= "Enable the Full Duplex Function." $VT_AUTO_DES = "AUTO mode" $VT_AUTO_HLP = "Enable the AUTO Negotiation Function." $VT_SPEED_DES = "SPEED selection" $VT_SPEED_HLP = "Select the SPEED between 10 and 100." $VT_SLOT_DES = "Slot" $VT_SLOT_HLP = "Enter the PCI Slot number of your LAN card to enable PCI auto config function." $VT_CONTYPE_DES = "Media and Line Speed" $VT_CONTYPE_HLP = "Choose the connection/media type you would like to use, or NONE for preprogramed card's default." $VT_PRI_DES = "Priority Transmit Support" $VT_PRI_HLP = "Choose the priority transmit function you would like to use, or NONE for preprogramed card's default" $VT_TAG_DES = "Tagging ability Support" $VT_TAG_HLP = "Choose the tagging function you would like to use, or NONE for preprogramed card's default" $VT_FLOWCTL_DES = "Flow control ability" $VT_FLOWCTL_HLP = "Choose the flow control ability you would like to use, or NONE for preprogramed card's default." $VT_HCS_DES = "Hardware Checksum Support" $VT_HCS_HLP = "Choose the hardware checksum function you would like to use, or NONE for preprogramed card's default" $VT_VID_DES = "VID number support for VLAN" $VT_VID_HLP = "Enter the VID number of your LAN card to support VLAN function." $VT_TBUF_DES = "TD number" $VT_TBUF_HLP = "Enter the TD number to set TransmitBuffers" $VT_RBUF_DES = "RD number" $VT_RBUF_HLP = "Enter the RD number to set ReceiveBuffers" $VT_CAUTO_CD = "Auto-Sense media type" $VT_CAUTO_CH = "Autosense" $VT_C10H_CD = "Twisted Pair 10MBPS" $VT_C10H_CH = "10BASET" $VT_C10F_CD = "Twisted pair - Full Duplex 10MBPS" $VT_C10F_CH = "10BASETFD" $VT_C100H_CD = "Twisted pair - Full Duplex 100MBPS" $VT_C100H_CH = "100BASETXFD" $VT_C100F_CD = "Fast Ethernet 100MBPS" $VT_C100F_CH = "100BASETX" $VT_FHD_CD = "Use Hardware Default (Auto)" $VT_FHD_CH = "Hardware_Default" $VT_FENA_CD = "Enable Flow Control" $VT_FENA_CH = "Enable" $VT_FDIS_CD = "Disable Flow Control" $VT_FDIS_CH = "Disable" $VT_PENA_CD = "Enable Priority Transmit" $VT_PENA_CH = "Enable" $VT_PDIS_CD = "Disable Priority Transmit" $VT_PDIS_CH = "Disable" $VT_TENA_CD = "Enable Tagging" $VT_TENA_CH = "Enable" $VT_TDIS_CD = "Disable Tagging" $VT_TDIS_CH = "Disable" $VT_HENA_CD = "Enable Hardware Checksum" $VT_HENA_CH = "Enable" $VT_HDIS_CD = "Disable Hardware Checksum" $VT_HDIS_CH = "Disable" $VT_DES = "VIA Rhine Family Fast Ethernet Adapter" $VT_DES_3053 = "VIA Rhine III Management Adapter" $VT_DES_3106 = "VIA Rhine III Fast Ethernet Adapter" $VT_DES_3065 = "VIA Rhine II Fast Ethernet Adapter" $VT_DES_3043 = "VIA VT86C100A Rhine Fast Ethernet Adapter" $VT_HELP = "This driver (FETNWSC.LAN) supports PCI Fast Ethernet network boards installed in PCI expansion slots in server. You can install up to four boards as long as their settings do not conflict." LANG: 12 ;Portugese (Brazil) $VT_DUPLEX_DES= "Full Duplex mode" $VT_DUPLEX_HLP= "Enable the Full Duplex Function." $VT_AUTO_DES = "AUTO mode" $VT_AUTO_HLP = "Enable the AUTO Negotiation Function." $VT_SPEED_DES = "SPEED selection" $VT_SPEED_HLP = "Select the SPEED between 10 and 100." $VT_SLOT_DES = "Slot" $VT_SLOT_HLP = "Enter the PCI Slot number of your LAN card to enable PCI auto config function." $VT_CONTYPE_DES = "Media and Line Speed" $VT_CONTYPE_HLP = "Choose the connection/media type you would like to use, or NONE for preprogramed card's default." $VT_PRI_DES = "Priority Transmit Support" $VT_PRI_HLP = "Choose the priority transmit function you would like to use, or NONE for preprogramed card's default" $VT_TAG_DES = "Tagging ability Support" $VT_TAG_HLP = "Choose the tagging function you would like to use, or NONE for preprogramed card's default" $VT_FLOWCTL_DES = "Flow control ability" $VT_FLOWCTL_HLP = "Choose the flow control ability you would like to use, or NONE for preprogramed card's default." $VT_HCS_DES = "Hardware Checksum Support" $VT_HCS_HLP = "Choose the hardware checksum function you would like to use, or NONE for preprogramed card's default" $VT_VID_DES = "VID number support for VLAN" $VT_VID_HLP = "Enter the VID number of your LAN card to support VLAN function." $VT_TBUF_DES = "TD number" $VT_TBUF_HLP = "Enter the TD number to set TransmitBuffers" $VT_RBUF_DES = "RD number" $VT_RBUF_HLP = "Enter the RD number to set ReceiveBuffers" $VT_CAUTO_CD = "Auto-Sense media type" $VT_CAUTO_CH = "Autosense" $VT_C10H_CD = "Twisted Pair 10MBPS" $VT_C10H_CH = "10BASET" $VT_C10F_CD = "Twisted pair - Full Duplex 10MBPS" $VT_C10F_CH = "10BASETFD" $VT_C100H_CD = "Twisted pair - Full Duplex 100MBPS" $VT_C100H_CH = "100BASETXFD" $VT_C100F_CD = "Fast Ethernet 100MBPS" $VT_C100F_CH = "100BASETX" $VT_FHD_CD = "Use Hardware Default (Auto)" $VT_FHD_CH = "Hardware_Default" $VT_FENA_CD = "Enable Flow Control" $VT_FENA_CH = "Enable" $VT_FDIS_CD = "Disable Flow Control" $VT_FDIS_CH = "Disable" $VT_PENA_CD = "Enable Priority Transmit" $VT_PENA_CH = "Enable" $VT_PDIS_CD = "Disable Priority Transmit" $VT_PDIS_CH = "Disable" $VT_TENA_CD = "Enable Tagging" $VT_TENA_CH = "Enable" $VT_TDIS_CD = "Disable Tagging" $VT_TDIS_CH = "Disable" $VT_HENA_CD = "Enable Hardware Checksum" $VT_HENA_CH = "Enable" $VT_HDIS_CD = "Disable Hardware Checksum" $VT_HDIS_CH = "Disable" $VT_DES = "VIA Rhine Family Fast Ethernet Adapter" $VT_DES_3053 = "VIA Rhine III Management Adapter" $VT_DES_3106 = "VIA Rhine III Fast Ethernet Adapter" $VT_DES_3065 = "VIA Rhine II Fast Ethernet Adapter" $VT_DES_3043 = "VIA VT86C100A Rhine Fast Ethernet Adapter" $VT_HELP = "This driver (FETNWSC.LAN) supports PCI Fast Ethernet network boards installed in PCI expansion slots in server. You can install up to four boards as long as their settings do not conflict." LANG: 13 ;Russian $VT_DUPLEX_DES= "Full Duplex mode" $VT_DUPLEX_HLP= "Enable the Full Duplex Function." $VT_AUTO_DES = "AUTO mode" $VT_AUTO_HLP = "Enable the AUTO Negotiation Function." $VT_SPEED_DES = "SPEED selection" $VT_SPEED_HLP = "Select the SPEED between 10 and 100." $VT_SLOT_DES = "Slot" $VT_SLOT_HLP = "Enter the PCI Slot number of your LAN card to enable PCI auto config function." $VT_CONTYPE_DES = "Media and Line Speed" $VT_CONTYPE_HLP = "Choose the connection/media type you would like to use, or NONE for preprogramed card's default." $VT_PRI_DES = "Priority Transmit Support" $VT_PRI_HLP = "Choose the priority transmit function you would like to use, or NONE for preprogramed card's default" $VT_TAG_DES = "Tagging ability Support" $VT_TAG_HLP = "Choose the tagging function you would like to use, or NONE for preprogramed card's default" $VT_FLOWCTL_DES = "Flow control ability" $VT_FLOWCTL_HLP = "Choose the flow control ability you would like to use, or NONE for preprogramed card's default." $VT_HCS_DES = "Hardware Checksum Support" $VT_HCS_HLP = "Choose the hardware checksum function you would like to use, or NONE for preprogramed card's default" $VT_VID_DES = "VID number support for VLAN" $VT_VID_HLP = "Enter the VID number of your LAN card to support VLAN function." $VT_TBUF_DES = "TD number" $VT_TBUF_HLP = "Enter the TD number to set TransmitBuffers" $VT_RBUF_DES = "RD number" $VT_RBUF_HLP = "Enter the RD number to set ReceiveBuffers" $VT_CAUTO_CD = "Auto-Sense media type" $VT_CAUTO_CH = "Autosense" $VT_C10H_CD = "Twisted Pair 10MBPS" $VT_C10H_CH = "10BASET" $VT_C10F_CD = "Twisted pair - Full Duplex 10MBPS" $VT_C10F_CH = "10BASETFD" $VT_C100H_CD = "Twisted pair - Full Duplex 100MBPS" $VT_C100H_CH = "100BASETXFD" $VT_C100F_CD = "Fast Ethernet 100MBPS" $VT_C100F_CH = "100BASETX" $VT_FHD_CD = "Use Hardware Default (Auto)" $VT_FHD_CH = "Hardware_Default" $VT_FENA_CD = "Enable Flow Control" $VT_FENA_CH = "Enable" $VT_FDIS_CD = "Disable Flow Control" $VT_FDIS_CH = "Disable" $VT_PENA_CD = "Enable Priority Transmit" $VT_PENA_CH = "Enable" $VT_PDIS_CD = "Disable Priority Transmit" $VT_PDIS_CH = "Disable" $VT_TENA_CD = "Enable Tagging" $VT_TENA_CH = "Enable" $VT_TDIS_CD = "Disable Tagging" $VT_TDIS_CH = "Disable" $VT_HENA_CD = "Enable Hardware Checksum" $VT_HENA_CH = "Enable" $VT_HDIS_CD = "Disable Hardware Checksum" $VT_HDIS_CH = "Disable" $VT_DES = "VIA Rhine Family Fast Ethernet Adapter" $VT_DES_3053 = "VIA Rhine III Management Adapter" $VT_DES_3106 = "VIA Rhine III Fast Ethernet Adapter" $VT_DES_3065 = "VIA Rhine II Fast Ethernet Adapter" $VT_DES_3043 = "VIA VT86C100A Rhine Fast Ethernet Adapter" $VT_HELP = "This driver (FETNWSC.LAN) supports PCI Fast Ethernet network boards installed in PCI expansion slots in server. You can install up to four boards as long as their settings do not conflict." LANG: 16 ;Chinese (Traditional) $VT_DUPLEX_DES= "Full Duplex mode" $VT_DUPLEX_HLP= "Enable the Full Duplex Function." $VT_AUTO_DES = "AUTO mode" $VT_AUTO_HLP = "Enable the AUTO Negotiation Function." $VT_SPEED_DES = "SPEED selection" $VT_SPEED_HLP = "Select the SPEED between 10 and 100." $VT_SLOT_DES = "Slot" $VT_SLOT_HLP = "Enter the PCI Slot number of your LAN card to enable PCI auto config function." $VT_CONTYPE_DES = "Media and Line Speed" $VT_CONTYPE_HLP = "Choose the connection/media type you would like to use, or NONE for preprogramed card's default." $VT_PRI_DES = "Priority Transmit Support" $VT_PRI_HLP = "Choose the priority transmit function you would like to use, or NONE for preprogramed card's default" $VT_TAG_DES = "Tagging ability Support" $VT_TAG_HLP = "Choose the tagging function you would like to use, or NONE for preprogramed card's default" $VT_FLOWCTL_DES = "Flow control ability" $VT_FLOWCTL_HLP = "Choose the flow control ability you would like to use, or NONE for preprogramed card's default." $VT_HCS_DES = "Hardware Checksum Support" $VT_HCS_HLP = "Choose the hardware checksum function you would like to use, or NONE for preprogramed card's default" $VT_VID_DES = "VID number support for VLAN" $VT_VID_HLP = "Enter the VID number of your LAN card to support VLAN function." $VT_TBUF_DES = "TD number" $VT_TBUF_HLP = "Enter the TD number to set TransmitBuffers" $VT_RBUF_DES = "RD number" $VT_RBUF_HLP = "Enter the RD number to set ReceiveBuffers" $VT_CAUTO_CD = "Auto-Sense media type" $VT_CAUTO_CH = "Autosense" $VT_C10H_CD = "Twisted Pair 10MBPS" $VT_C10H_CH = "10BASET" $VT_C10F_CD = "Twisted pair - Full Duplex 10MBPS" $VT_C10F_CH = "10BASETFD" $VT_C100H_CD = "Twisted pair - Full Duplex 100MBPS" $VT_C100H_CH = "100BASETXFD" $VT_C100F_CD = "Fast Ethernet 100MBPS" $VT_C100F_CH = "100BASETX" $VT_FHD_CD = "Use Hardware Default (Auto)" $VT_FHD_CH = "Hardware_Default" $VT_FENA_CD = "Enable Flow Control" $VT_FENA_CH = "Enable" $VT_FDIS_CD = "Disable Flow Control" $VT_FDIS_CH = "Disable" $VT_PENA_CD = "Enable Priority Transmit" $VT_PENA_CH = "Enable" $VT_PDIS_CD = "Disable Priority Transmit" $VT_PDIS_CH = "Disable" $VT_TENA_CD = "Enable Tagging" $VT_TENA_CH = "Enable" $VT_TDIS_CD = "Disable Tagging" $VT_TDIS_CH = "Disable" $VT_HENA_CD = "Enable Hardware Checksum" $VT_HENA_CH = "Enable" $VT_HDIS_CD = "Disable Hardware Checksum" $VT_HDIS_CH = "Disable" $VT_DES = "VIA Rhine Family Fast Ethernet Adapter" $VT_DES_3053 = "VIA Rhine III Management Adapter" $VT_DES_3106 = "VIA Rhine III Fast Ethernet Adapter" $VT_DES_3065 = "VIA Rhine II Fast Ethernet Adapter" $VT_DES_3043 = "VIA VT86C100A Rhine Fast Ethernet Adapter" $VT_HELP = "This driver (FETNWSC.LAN) supports PCI Fast Ethernet network boards installed in PCI expansion slots in server. You can install up to four boards as long as their settings do not conflict." LANG: 1 ;Chinese (Simplified) $VT_DUPLEX_DES= "Full Duplex mode" $VT_DUPLEX_HLP= "Enable the Full Duplex Function." $VT_AUTO_DES = "AUTO mode" $VT_AUTO_HLP = "Enable the AUTO Negotiation Function." $VT_SPEED_DES = "SPEED selection" $VT_SPEED_HLP = "Select the SPEED between 10 and 100." $VT_SLOT_DES = "Slot" $VT_SLOT_HLP = "Enter the PCI Slot number of your LAN card to enable PCI auto config function." $VT_CONTYPE_DES = "Media and Line Speed" $VT_CONTYPE_HLP = "Choose the connection/media type you would like to use, or NONE for preprogramed card's default." $VT_PRI_DES = "Priority Transmit Support" $VT_PRI_HLP = "Choose the priority transmit function you would like to use, or NONE for preprogramed card's default" $VT_TAG_DES = "Tagging ability Support" $VT_TAG_HLP = "Choose the tagging function you would like to use, or NONE for preprogramed card's default" $VT_FLOWCTL_DES = "Flow control ability" $VT_FLOWCTL_HLP = "Choose the flow control ability you would like to use, or NONE for preprogramed card's default." $VT_HCS_DES = "Hardware Checksum Support" $VT_HCS_HLP = "Choose the hardware checksum function you would like to use, or NONE for preprogramed card's default" $VT_VID_DES = "VID number support for VLAN" $VT_VID_HLP = "Enter the VID number of your LAN card to support VLAN function." $VT_TBUF_DES = "TD number" $VT_TBUF_HLP = "Enter the TD number to set TransmitBuffers" $VT_RBUF_DES = "RD number" $VT_RBUF_HLP = "Enter the RD number to set ReceiveBuffers" $VT_CAUTO_CD = "Auto-Sense media type" $VT_CAUTO_CH = "Autosense" $VT_C10H_CD = "Twisted Pair 10MBPS" $VT_C10H_CH = "10BASET" $VT_C10F_CD = "Twisted pair - Full Duplex 10MBPS" $VT_C10F_CH = "10BASETFD" $VT_C100H_CD = "Twisted pair - Full Duplex 100MBPS" $VT_C100H_CH = "100BASETXFD" $VT_C100F_CD = "Fast Ethernet 100MBPS" $VT_C100F_CH = "100BASETX" $VT_FHD_CD = "Use Hardware Default (Auto)" $VT_FHD_CH = "Hardware_Default" $VT_FENA_CD = "Enable Flow Control" $VT_FENA_CH = "Enable" $VT_FDIS_CD = "Disable Flow Control" $VT_FDIS_CH = "Disable" $VT_PENA_CD = "Enable Priority Transmit" $VT_PENA_CH = "Enable" $VT_PDIS_CD = "Disable Priority Transmit" $VT_PDIS_CH = "Disable" $VT_TENA_CD = "Enable Tagging" $VT_TENA_CH = "Enable" $VT_TDIS_CD = "Disable Tagging" $VT_TDIS_CH = "Disable" $VT_HENA_CD = "Enable Hardware Checksum" $VT_HENA_CH = "Enable" $VT_HDIS_CD = "Disable Hardware Checksum" $VT_HDIS_CH = "Disable" $VT_DES = "VIA Rhine Family Fast Ethernet Adapter" $VT_DES_3053 = "VIA Rhine III Management Adapter" $VT_DES_3106 = "VIA Rhine III Fast Ethernet Adapter" $VT_DES_3065 = "VIA Rhine II Fast Ethernet Adapter" $VT_DES_3043 = "VIA VT86C100A Rhine Fast Ethernet Adapter" $VT_HELP = "This driver (FETNWSC.LAN) supports PCI Fast Ethernet network boards installed in PCI expansion slots in server. You can install up to four boards as long as their settings do not conflict." ;DrIvEr DeScRiPtIoN EnD