***************** OS/2 PRINT SUBSYSTEM PRINTER DRIVER ********************* ***************** FIXPAK FOR OS/2 WARP v3.00 AND ABOVE ********************* IMPORTANT --------- PLEASE READ THE FOLLOWING TERMS AND CONDITIONS. DOWNLOADING THE SERVICE FIX THAT FOLLOWS, INDICATES YOUR ACCEPTANCE OF THE FOLLOWING TERMS AND CONDITIONS: - YOU MUST BE, AND YOU AGREE THAT YOU ARE, A PRIOR LICENSEE OF OS/2 WARP VERSION 3.00 - YOU MAY MAKE COPIES OF THE OS/2 WARP VERSION 3.00 SERVICE FIX EQUAL TO THE NUMBER OF LICENSED COPIES OF OS/2 WARP VERSION 3.00 YOU POSSESS - YOU MAY ONLY USE THIS SERVICE FIX FOR MAINTENANCE PURPOSES - ALL OTHER TERMS AND CONDITIONS OF YOUR OS/2 WARP VERSION 3.00 LICENSE AGREEMENT APPLY TO THIS SERVICE FIX; HOWEVER, THIS DOES NOT EXTEND ANY WARRANTY OUTLINED IN SUCH AGREEMENT. ***************************************************************************** Note: Because of a change maded in the laserjet driver, module BROKER.DLL is no longer needed. After installing this fixpak, you may wish to delete this module from your system. ***************************************************************************** *************************************** OS/2 PRINTER FIXPAK = XR0P012 *************************************** PRNTR LEVEL 30.461 *************************************** AFFECTED MODULE(s): *************************************** LASERJET.DRV LASERJET.HLP FONTS *************************************** APAR(s) FIXED: *************************************** ************************************************************************* Note: Some fixed APARs may NOT be listed below. If you received this FixPak through the IBM OS/2 support channel and your requested APAR(s) is/are NOT listed, please install this FixPak, your requested APAR(s) is/are included. ************************************************************************* APAR= PJ16528 FORM SIZES FOR CUSTOM FORMS CREATED FOR LASERJET.DRV ARE INCORRECT IF MORE THAN ONE CUSTOM FORM IS CREATED. APAR= PJ17063 LASERJET.DRV PRINTS AN INCORRECT HORIZONTAL LINE WHEN USING ENVELOPES. APAR= PJ17300 PRINTING WITH AMIPRO GIVES A BLANK OUTPUT AREA IN THE MIDDLE OF THE PAGE IN WARP 3.0 LASERJET DRIVER APAR= PJ17998 PRINTING ON LANDSCAPE AND LEGAL OPTIONS IN IBM WORKS USING HP LASERJET SERIES II PRINTS A VERTICAL LINE NEXT TO EACH CHARECTER. APAR= PJ18508 PRINTING TO A HPLJ 4 (VER 30.443) FROM CM/2 1.11 PRINTS A BLANK SPACE ON EACH AND EVERY LINE AT TWO PLACES ON THE DOCUMENT. APAR= PJ18633 PRINTING TO A HPLJ 4 (VER 30.443) FROM CM/2 1.11 PRINTS A BLANK SPACE ON EACH AND EVERY LINE AT TWO PLACES ON THE DOCUMENT. APAR= PJ18783 AFTER SETTING THE FORMS WITH DIFFERENT OPTIONS FOR THE LASERJET DRIVER, THE PRINT OUT COMES OUT ON PLAIN PAPER INSTEAD OF ENVELOPE. APAR= PJ17901 PRINTING TO FILE AND THEN PERFORMING DRAG AND DROP CAUSES EXTRA SHEETS OF PAPER BEFORE AND AFTER DOCUMENT ON HP LASERJET IIP. APAR= PJ18996 WRONG OUTPUT WHEN USING LASERJET.DRV VER. 3.0.444 APAR= PJ19006 NOT PRINTING ON THE CORRECT FORM AFTER DEFINING THE FORMS WITH LASERJET DRIVER. APAR= PJ19228 WRONG OUTPUT WHEN USING LASERJET.DRV VER. 3.0.444 APAR= PJ19863 MIGRATING TO WARP FROM OS/2 2.11, THE LASERJET PRINTER PROPERTIES HAVE CHANGED. APAR= PJ19971 BLANK COLUMNS WHEN PRINTING FROM HP LASERJET 4P USING DRIVER VER LASERJET.DRV VER 30.452. APAR= PJ20078 PANASONIC KX-P4450 PRINTER PRINTS IN ENVELOPE SIZED AREA IF THE PRINTER IS BOOTED WITH THE ENVELOPE TRAY INSTALLED. APAR= PJ20648 STARWRITER FOR OS/2 VERSION 2.0 AND LASERJET.DRV FROM WARP. YOU GET BIG SPOOLFILE. APAR= PJ20661 AFTER APPLYING FIXPACK XR0P012.DSK FOR LASERJET, PRINTING FROM A COMMAND LINE DOES NOT PRINT THE FIRST LINE OF THE DOCUMENT. APAR= PJ20779 SYS3175 IN PMMERGE WHEN USING THE HPLASETJET DRIVER AND CALLING THE GPICHARSTRINGAT API. APAR= PJ21126 LASERJET.DRV FROM XR0P012 CORRUPT PRINT ON HP4 AND HP4M PRINTERS APAR= PJ21163 WRONG OUTPUT WHEN USING LASERJET.DRV VER. 30.456. APAR= PJ21260 "GIRAFFE" PATTERN PRINT PROBLEM LASERJET.DRV 30.456. APAR= PJ21418 HP III DRIVER PRINTOUT CORRUPTION WHEN PRINTING DARK BACKGROUND WINDOW IN A4 PAPER FORMAT. APAR= PJ21735 LASERJET DRIVER NOT ALLOWS SELECTION OF THE A3 FORM FOR PRINTER KYOCERA FS.6500. APAR= PJ21887 LASERJET DRIVER WILL SKIP (AND NOT PRINT) A BLANK PAGE IN A DOCUMENT IN AMIPRO AND IBMWORKS. APAR= PJ21951 PRINTING TEXT FROM MS PMWORD IN 300 DPI USING CG TMS RMN FONT, SIZE 10 , LASERJET.DRV DRIVER AND HP 4 GIVES OVERLAPPED CHARACT. ************************************************************************* To INSTALL this fix perform the following steps : Use these printer drivers as you would your original printer driver diskettes that were shipped with OS/2. - Unpack printer driver with LOADDSKF to a directory on your system or to a diskette - Open the printer object(s) and deselect all drivers you have acquired this fix for and select another driver file as default. - Close the printer object. - Reboot the system without letting any print jobs print. - Open the printer object settings and printer driver and select install from one of the driver objects. - The "Install New Printer Driver" dialog will appear. - Select "Other OS/2 Printer Driver" and enter the drive and/or directory that you have put the driver files into for the install. - Press Install button and a message box will appear asking if you would like to replace the driver with the new level and select yes. - Close the "Install New Printer Driver" dialog and select the correct driver for the print object - Close print object. You will now be ready to print using the driver. If you need additional help installing the printer driver, please refer to the on-line help facility. Note: If you are in a network environment, we suggest that you match printer driver levels between both the server and the requestors.