          Install Notes for Unite CD-Maker V1.0b
                   Cirrus Technology, Inc.
        (C) Copyright Cirrus Technology, Inc., 1995

Contents
--------
This document contains important information regarding the
installation and operation of Unite CD-Maker.  It is 
recommended that this entire document be read prior to 
installing this software.

                * Release Notes
                * Installation Requirements
                * Installation Procedures

If you have any questions, please call technical support
on (301) 698-1900.

Release Notes
-----------
Version 1.0b of Unite CD-Maker provides support for the
Pinnacle RCD-1000, Plasmon RF4102, HP 4020i, Pioneer DW-S114X,
Smart and Friendly, and Phillips CDD-2000 CD-recorder devices.

A change was also made to the CD Stage object to correct
a calculation error.
  
Installation Requirements
--------------------
Unite CD-Maker V1.0  or V1.0a must be installed prior to 
installing this version.
   
Installation Procedures
------------------
1.  From an OS/2 prompt, create the sub-directory \10B
    in the directory in which Unite CD-Maker is installed.
    For example, if Unite CD-Maker is installed in
    D:\UNITE, issue the command:

    MD D:\UNITE\10B

2.  Copy CDM10B.EXE into the \10B sub-directory.

3.  Execute CDM10B.EXE.  CDM10B.EXE is a self-
    extracting PKZIP file which will place the Unite
    CD-Maker V1.0B .DLL files into the \10B sub-
    directory.

4.  Edit CONFIG.SYS.  Remove the path
    <install_drive>:\<install_dir>\LIB from the LIBPATH line.
    For example, if Version 1.0 of Unite CD-Maker is installed
    in D:\UNITE, the path D:\UNITE\LIB must be removed from
    LIBPATH.

5.  Reboot your PC.

6.  Copy the .DLL and .MSG files from the \10B sub-directory 
    into the \LIB sub-directory.  For example, if Unite 
    CD-Maker V1.0 is installed in D:\UNITE, issue the command:

    COPY D:\UNITE\10B\*.DLL D:\UNITE\LIB\*

7.  Edit CONFIG.SYS.  Add the path
    <install_drive>:\<install_dir>\LIB to the LIBPATH line.
    For example, if Unite CD-Maker is installed in
    D:\UNITE, the path D:\UNITE\LIB must be added to
    LIBPATH.

8.  Reboot your PC.

9.  The files in the \10B sub-directory can be deleted and the
    \10B sub-directory can be removed.
_________________________________________________________________________
Unite CD-Maker runs under a graphical environment called Presentation
Manager, created by International Business Machines Corporation and 
Microsoft Corporation.

To use Unite CD-Maker under OS/2 Presentation Manager, you need to
license and install IBM's OS/2 WARP Version 3.0 or higher.

Some product names have been used for identification only and may be 
trademarks of their respective companies.
