OSIN1475 - SYS1475 ERROR MESSAGE WHEN STARTING OS/2, 2.X, WARP
10/19/94

================================================================
 SYS1475 ERROR MESSAGE WHEN STARTING OS/2, 2.X, WARP
================================================================

     SYS1475 & SYS2027, cannot boot to OS2
     SYS1475 & SYS2027, OS2BOOT cannot be found
     SYS1475 & SYS2027, Operating System missing

Please Read Entire Document For Full Explanation of Procedures
----------------------------------------------------------------

    NOTE:  The system also displays this error if there is
           diskette in drive A:  Check to be sure you do
           NOT have a diskette in drive A:  If so, remove it
           and restart the system.

RESOLUTION:

Do the following steps to restore your system files back to the hard
disk.

1. Insert Installation Diskette into drive A:

2. Turn computer on, or press Ctrl+Alt+Del to restart the system.

3. When prompted, remove Installation Diskette and insert
   Diskette 1.

4. Press Enter.

5. When the Welcome Screen appears:
   - For OS/2 WARP: Press F3 to display the command prompt.
   - For OS/2 2.X:  Press Esc to display the command prompt.

6. Reinsert the Installation Diskette.

7. Type:  SYSINSTX X:  and press Enter.
     (where X: is where OS/2 resides)

8. When the command completes, remove the diskette and restart
   system.