OSINLMS5 - INSTALLING OS/2 WARP from a PHILLIPS LMS205 CD-ROM
10/29/94

================================================================
INSTALLING OS/2 WARP from a PHILLIPS LMS205 CD-ROM
================================================================

The LMS205.ADD CD-ROM driver is not on Diskette 1 with the other
CD-ROM drivers due to space condsiderations.  If you have a
Phillips LMS205 CD-ROM and ARE INSTALLING from the CD-ROM Version
of OS/2 WARP, please do the following:

1. Start the system with OS/2 or DOS.

2. Make a temporary subdirectory on your hard disk, type:

        MD TEMP and press Enter.

3. Insert the OS/2 WARP Installation diskette into drive A.
   Copy the LMS205.ADD driver to the temporary subdirectory on
   the hard disk, type:

        COPY A:\LMS205.ADD c:\TEMP and press Enter.
        (Where c: is the hard disk)

4. Insert the OS/2 WARP Diskette 1 in the 3.5"  A: drive.  Make
   sure you have a blank, formatted 1.44 MB diskette ready.

5. From a command prompt type:

        DISKCOPY A: A: and press Enter.

6. Follow the prompts.

7. Put the ORIGINAL OS/2 WARP Diskette 1 away and use the
   DISKCOPY of Diskette 1 for the remainder of this procedure.

7. From the DISKCOPY of Diskette 1, delete the file LMS206.ADD:

        DEL A:\LMS206.ADD and press Enter.

8. Copy the LMS205.ADD driver from the temporary subdirectory to the
   DISKCOPY of Diskette 1:

        COPY c:\TEMP\LMS205.ADD A: and press Enter.

9. Edit A:\CONFIG.SYS on the DISKCOPY of Diskette 1 and change the
   statement:

       From:     basedev=lms206.add

       To:       basedev=lms205.add

10. Start OS/2 WARP installation using the DISKCOPY of Diskette
    1.